An isoelectric point calculator finds the pH at which a molecule carries no net electric charge, the pI. Pick one of the 20 amino acids to see its pI from its pKa values beside the tabulated figure, or enter an acid pKa and a base pKa of your own and get their mean.
How to use the isoelectric point calculator
- Choose Pick an amino acid or Enter two pKa values.
- Select the amino acid, or type the acid pKa and the base pKa.
- Press Calculate.
What the pI is
The isoelectric point, written pI, is the pH at which a molecule has no net electrical charge. Below it, the molecule carries a net positive charge, and above it a net negative charge.
The mean of two pKa values
For a molecule with one amine group and one carboxyl group, Wikipedia says the pI can be calculated from the mean of the pKa values, (pKa1 + pKa2) ÷ 2 [1]. The two values are the acid group and the base group on either side of the neutral form. In the second mode, the calculator does exactly this sum.
Examples for the second mode
These are our own sums. A pKa of 3.7 with 9.4 gives 6.55, 3.2 with 8.1 gives 5.65, and 2.2 with 7.5 gives 4.85. Each answer is the mean of the two values. You can type all three pairs into the second mode to check them.
The amino acid mode
In the first mode you pick an amino acid. The calculator then uses the pK values that Wikipedia lists for the 20 proteinogenic amino acids: the carboxyl group pK₁, the amino group pK₂, and the side chain pKR where there is one [2]. The same table lists a tabulated pI for each, which the calculator shows beside its own result so you can compare the two.
Choosing the two pKa values
The sources give no rule for choosing which two values to average, so the choice of pKa values is our own working. With no ionisable side chain, the neutral form lies between pK₁ and pK₂, so the pI is their mean. With an acidic side chain, it lies between pK₁ and the side chain pKR. With a basic side chain, it lies between the pKR and pK₂. The calculator states which case it used.
Worked example: aspartic acid
Aspartic acid has pK₁ 1.99, pK₂ 9.90 and a side chain pKR of 3.67 [2]. The side chain is acidic, so the neutral form lies between 1.99 and 3.67, and the pI is (1.99 + 3.67) ÷ 2 = 2.83. The table lists 2.85, so the two differ by 0.02. For glycine, with no side chain, (2.35 + 9.78) ÷ 2 gives 6.065, against a tabulated 6.06.
Why the tabulated value can differ
The tabulated pI does not always equal the mean of the listed pKa values, because it comes from a different set of pK values. For lysine the working gives 9.73 against a tabulated 9.60, and for histidine 7.935 against 7.60, a gap of about 0.34, the largest of the common cases. For alanine the two are 6.11 and 6.01. The calculator shows both so that you see the gap.
Tyrosine and cysteine
Tyrosine is a case where the side chain pKR of 9.84 lies above the amino group pK₂ of 9.21 [2]. The neutral form is then bounded by pK₁ and pK₂, and the pI is 5.705, against 5.64 in the table. Cysteine has a pKR of 8.55 below its pK₂ of 10.70, so its working is (1.92 + 8.55) ÷ 2 = 5.235, against 5.05. The calculator handles both automatically.
What the tool does not do
The calculator does not take a peptide sequence. A peptide or protein has many ionisable groups, and Wikipedia notes that most methods for peptides use the Henderson–Hasselbalch equation with different sets of pK values [1]. That is a different calculation from the mean of two values, and no single set of values is stated. The results here are for free amino acids and for simple two-group molecules.
Using the calculator
For an amino acid, choose the first mode, pick it from the list and press the button. You get the working, the tabulated pI and the difference. For your own molecule, choose the second mode and type the acid pKa and the base pKa. If the acid value is larger than the base value, the calculator warns you that the two may be swapped.
Reading the result
In the first mode the result line gives the pI worked out from the pKa values, followed by the tabulated pI. The working line names the two pKa values that were averaged and says which case applied. The comparison line gives the table's own pK values and the size of the gap between the two pI figures. The last line is a reminder that the values belong to the free amino acid. In the second mode, you get the mean and a short note on what the pI means.
Common mistakes
- Swapping the acid and the base pKa. The acid pKa is normally the lower one.
- Expecting the working to match the table exactly. They come from different pK sets.
- Using it for a protein. It works for free amino acids and two-group molecules.
- Averaging the wrong two pKa values. Use the two on either side of the neutral form.
What next
Use this often? Add Isoelectric to your Home screen.
Frequently asked questions
What is an isoelectric point calculator?
A tool that finds the pH at which a molecule has no net charge, from its pKa values.
What is the isoelectric point formula?
pI = (pKa₁ + pKa₂) ÷ 2, using the two pKa values on either side of the neutral form.
What is the pI of aspartic acid?
About 2.83 from the pKa values, and 2.85 in the table.
Why does the tabulated pI differ from the calculated one?
The tabulated figure comes from a different set of pK values.
Can it find the pI of a peptide?
No. It covers free amino acids and two-group molecules only.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.