An inductor energy calculator finds the energy stored in the magnetic field of a coil from its inductance and the current through it. It can also find the current or the inductance that goes with a given energy. Choose the units that match your parts, from henries to nanohenries and from amperes to microamperes.
How to use the inductor energy calculator
- Choose what to find: the energy, the current or the inductance.
- Enter the other two values and pick their units.
- Press Calculate.
The formula
The energy stored in an inductor is E = ½ × L × I², where L is the inductance in henries and I the current in amperes. Wikipedia writes the relation as W = ½ L I₀² and says it applies to air-core inductors and to ferromagnetic-core inductors below magnetic saturation, where the inductance stays constant [1]. The result is in joules.
A worked example
As a worked example, take an inductance of 20 microhenries and a direct current of 300 milliamperes. In base units, L = 2 × 10⁻⁵ henries and I = 0.3 amperes, so E = ½ × 2 × 10⁻⁵ × 0.3² = 9 × 10⁻⁷ joules, which is 0.9 microjoules or 900 nanojoules. The calculator starts with these units, so you can press Calculate and see that result.
The current is squared
The current appears squared, so doubling it quadruples the stored energy [1]. Raising the current from 300 to 600 milliamperes in the example gives 3.6 microjoules instead of 0.9. The inductance enters only once, so doubling it only doubles the energy. For a small stored energy, a small change in current has a large effect.
Solving for the current
If you know the energy and the inductance, turn the formula round: I = √(2E ÷ L). This rearrangement is our own algebra. For 900 nanojoules and 20 microhenries, I = √(1.8 × 10⁻⁶ ÷ 2 × 10⁻⁵) = √0.09 = 0.3 amperes, or 300 milliamperes, the value we started with. Use it to find the largest current that keeps the stored energy under a limit.
Solving for the inductance
Likewise, L = 2E ÷ I². With 900 nanojoules and a current of 300 milliamperes, L = 1.8 × 10⁻⁶ ÷ 0.09 = 2 × 10⁻⁵ henries, which is 20 microhenries. This is also our own algebra. It is useful when a datasheet gives the energy that a part can store and its rated current, and you want the inductance.
When the field exists
Wikipedia explains that when the current falls, the stored energy is returned to the circuit and raises the voltage across the windings [1]. That is why switching off an inductor can cause a voltage spike. The calculator gives the energy at a steady current, not the energy released when it is switched off.
Cores and inductance
A ferromagnetic core of high permeability raises the inductance, and with it the energy stored at the same current. Wikipedia adds the limit: the formula holds below magnetic saturation, where the inductance is constant [1]. Past saturation the inductance falls, and the formula overestimates the energy. Check the saturation current in the datasheet.
Choosing units
Coils in electronics are often given in microhenries or millihenries, and currents in milliamperes. The unit boxes convert them to henries and amperes for you: 1 millihenry is 10⁻³ henries, 1 microhenry is 10⁻⁶ and 1 nanohenry is 10⁻⁹, and the same prefixes apply to amperes and joules. The result is shown with a prefix such as nJ or µJ and also in scientific notation.
What the formula does not cover
The basic formula says nothing about non-ideal behaviour. Real coils also have winding resistance, which wastes power as heat but does not store energy, and parasitic capacitance. The energy stored in the field is separate from those losses. For an alternating current, enter the peak current to get the peak energy.
Using the calculator
Pick the quantity you want, enter the other two with their units, and press Calculate. The result line repeats all three values, so you can check that they agree. Try doubling the current to see the energy quadruple, or compare two inductors of different inductance at the same current to see how the stored energy changes.
Comparing with other parts
A capacitor stores energy in an electric field, and an inductor stores it in a magnetic field. The inductor formula, ½ L I², has the same shape as the capacitor formula, ½ C V², with the current in place of the voltage. This is a standard parallel that we state as our own working. Use the capacitor calculator to compare the energy that each part can hold at its rated values.
Checking against a datasheet
Datasheets for power inductors list the inductance and the saturation current. Enter both to see the largest energy that the part can store before its core saturates, and keep your operating current below that value. For a 20 microhenry coil rated at 3 amperes, the limit is 90 microjoules. This is an estimate of the stored energy only, and does not show heating or losses.
A quick sanity check
Before you trust a result, estimate it by hand. Square the current, multiply by the inductance, and halve the product. For 0.3 amperes and 20 microhenries, 0.09 times 0.00002 is 1.8 microjoules, and half of that is 0.9 microjoules. If your own estimate is far from the calculator, look first for a wrong unit prefix, which is the usual cause of a result that is a thousand or a million times off.
Common mistakes
- Mixing up milliamperes and amperes. Check the unit boxes.
- Forgetting to square the current. Energy depends on I².
- Using the formula past saturation. The inductance falls there.
- Confusing stored energy with power loss. Winding resistance is separate.
What next
Use this often? Add Inductor Ene to your Home screen.
Frequently asked questions
What is an inductor energy calculator?
A tool that finds the energy stored in a coil from its inductance and current.
What is the formula for the energy in an inductor?
E = ½ L I², with L in henries and I in amperes.
What happens to the energy if the current doubles?
It quadruples, because the current is squared.
Does the formula work for any core?
For air cores and for cores below saturation, where the inductance is constant.
How do I find the inductance from the energy?
L = 2E ÷ I², which is our own rearrangement.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.