An idling fuel consumption calculator estimates how much fuel a car burns when it stands with the engine running. Choose petrol or diesel, enter the size of the engine, and the calculator gives the fuel used per hour. Add the time you idle and the price of fuel to see how much it costs. It uses two simple rules of thumb of our own, which we checked against the range that the US Department of Energy gives for idling.[1] It runs in your browser and nothing you enter is sent anywhere.
How to use the idling fuel consumption calculator
- Choose US or Metric units and the fuel type.
- Enter the engine size and choose litres, cubic centimetres or cubic inches.
- If you want the cost, enter the time spent idling and the fuel price.
- Press Estimate idling fuel.
The two rules
The US Department of Energy says that idling can use a quarter to a half gallon of fuel per hour, depending on engine size and air conditioner use.[1] This calculator turns that into two rules of thumb, which are our own working. For a petrol engine, the fuel used while idling, in litres per hour, is the engine size in litres times 0.6. For a diesel engine, it is the engine size in litres times 0.45. We have no published source for these exact factors, so they are simplified values for typical passenger cars. A 2.0-litre petrol engine at 1.2 litres an hour is 0.32 gallons an hour, which sits inside the Department of Energy range. Engine sizes given in cubic centimetres are divided by 1,000, and sizes in cubic inches are multiplied by 0.016387 to get litres.
Worked examples
Take a 2.0-litre petrol engine, which the rule puts at about 1.2 litres an hour at idle. A 2.0-litre diesel engine uses about 0.9 litres an hour. In US units, 1.2 litres an hour is about 0.32 gallons an hour. If you idle for 30 minutes, the first engine uses about 0.6 litres, and at 1.50 per litre that costs 0.90. The cost part of the calculation is plain multiplication.
Why diesel is lower
Diesel engines are generally expected to burn less fuel at idle than petrol engines of the same size, but we have no source for the exact ratio, so the 0.45 factor is our own working. The two factors make a diesel engine use about three quarters as much fuel as a petrol one.
What changes the result
The real idle rate depends on the design and the age of the engine, the weather and the idle speed. The Department of Energy names engine size and air conditioner use as the main factors.[1] Some modern engines idle at lower rates, so the result should be taken as a rough guide, and for your own car, you can measure it by watching the fuel gauge or trip computer over a long idle.
Is it worth idling?
The figures show that idling burns fuel and money without moving the car. A half hour of idling for a 2-litre petrol engine uses about 0.6 litres, which can add up if you do it every day. Many drivers choose to switch off the engine when they expect to wait for more than a minute or so. Use the calculator to see what your own habits cost over a week or a year by entering the total time.
Reading the result
The calculator shows the fuel used per hour in litres and in US gallons. If you entered the idling time, it shows the fuel used in that time, in litres for metric and in gallons for US units, and the cost if you gave a price. Use the per-hour figure to compare engines and fuels, and the cost to see what a habit such as warming up the car or waiting in a queue adds up to over a month.
Comparing engines
Because the formulas are linear in the engine size, a bigger engine uses proportionally more fuel at idle. A 3.0-litre petrol engine uses about 1.8 litres an hour, which is 50 percent more than a 2.0-litre one at 1.2 litres. A 1.5-litre petrol engine uses about 0.9 litres an hour. Try your own engine in the calculator, and compare it with the petrol and diesel versions.
Cutting idling
The simplest way to reduce idling costs is to switch off the engine when you wait. Avoid long warm-ups when it is not needed, plan stops so that you do not wait with the engine on, and use a drive-through less often. For fleets and delivery drivers, the total time spent idling can be large, so entering the idle hours for a whole year shows the size of the saving.
Metric and US entries
In metric mode, the fuel price is per litre and the fuel used is in litres. In US mode, the price is per gallon and the fuel used is in US gallons, where one gallon is 3.785 litres. The calculator always shows the rate per hour in both units, so you can compare it with figures from either system. Engine sizes in cubic inches are converted to litres first, so that the same rules apply.
Common mistakes
- Entering cubic centimetres as litres. Choose the right unit for the engine size.
- Mixing the fuel price unit. Use the price per litre in metric and per gallon in US units.
- Taking it as exact. It is a rough estimate.
- Forgetting accessories. Air conditioning uses more fuel.
What next
Use this often? Add Idling Fuel to your Home screen.
Frequently asked questions
What is an idling fuel consumption calculator?
A tool that estimates the fuel used per hour when an engine idles, and what it costs.
How much fuel does a petrol engine use while idling?
Our rule of thumb is engine size in litres times 0.6 litres an hour. A 2.0 litre engine uses about 1.2. The US Department of Energy gives a wider range of a quarter to a half gallon an hour.
How much does a diesel engine use?
Engine size in litres times 0.45 litres an hour. A 2.0 litre diesel uses about 0.9.
Is the result exact?
No. The factors are our own simplified rules of thumb for typical passenger cars, so use the result as a rough guide.
Can I enter cubic inches?
Yes. Choose cubic inches or cubic centimetres as the engine size unit.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.