Saved

Press the star next to a tool's name to save it.

All my tools

Hydroelectric Power Calculator

Use this hydroelectric power calculator to estimate the kilowatts a stream or dam can produce from head, flow and efficiency, and the energy per year, in US or metric units.

Restored your last values ·

Choose US or metric units. Enter the head and the flow rate. Add the efficiency to allow for losses, and the share of the year the plant runs to get the annual energy.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the head and the flow, then press Calculate.

See full result

A hydroelectric power calculator estimates how much electrical power a stream or a dam can produce from the head, which is the height of the drop, and the flow of water. Add the efficiency of the turbine and the generator to get a realistic figure, and the share of the year it runs to get the energy per year.

How to use the hydroelectric power calculator

  1. Choose US or metric units.
  2. Enter the head and the flow rate.
  3. Add the efficiency and the share of the year that the plant runs.
  4. Press Calculate.

The power formula

For a small hydro site in US units, the page gives P = Q × H ÷ k, with Q the flow in gallons per minute, H the static head in feet and k = 5,310, which gives the power in kilowatts [2]. Its example is a flow of 500 gallons per minute and a head of 60 feet, which gives a theoretical maximum of 5.65 kilowatts [2]. This figure has no efficiency term, so it is an upper limit.

Metric units

In SI units the power is P = η ρ g H Q, where η is the efficiency, ρ the density of water, about 1,000 kilograms per cubic metre, g the acceleration of gravity, H the head in metres and Q the flow in cubic metres per second. The calculator uses g = 9.81 and divides by 1,000 to give kilowatts. This is the standard expression and is our own working, since the pages that we read give the US form. For a head of 10 metres and a flow of 0.1 cubic metres per second at 80 percent efficiency, the power is 7.85 kilowatts.

Efficiency

The page says that turbine efficiency is generally between 50 and 80 percent [2]. It lists specific designs: an Archimedes screw at 85 percent, a VLH Kaplan-type turbine at 90 percent, an overshot water wheel at a maximum of 85 percent and an undershot wheel below 30 percent [2]. Enter the figure for your machine. If you leave the box blank the calculator shows the theoretical maximum, and for 70 percent the 5.65 kilowatts becomes 3.95.

Head and flow

The head is the vertical distance that the water falls, and the page says that the net head is the gross head less the friction in the pipe [2]. A larger head or a larger flow gives more power, and the two multiply. The page notes that a drop of at least 2 feet, or 0.61 metre, is required for a micro hydro system [2]. At the small end, a drop of only 1 metre can give 200 to 300 watts [1].

Energy per year

Power is an instantaneous figure. To get energy, multiply by the hours. If a plant produces 3.95 kilowatts for the whole of the 8,760 hours in a year, it makes 34,600 kilowatt-hours. If the stream only gives that flow for half the year, the energy is half as much. The page says that the flow of a stream can vary by a factor of 10 to 1 over a year, so the share of the year is a key input [1]. The calculator multiplies the power by 8,760 and by your share, an arithmetic step of our own.

Size of schemes

The page describes micro hydro as schemes of 5 to 100 kilowatts, with pico hydro below 5 kilowatts [2]. The calculator is aimed at these small schemes and at rough checks of larger ones. For a real project, a survey of the flow through the year and an engineer's design are needed.

Practical points

Measure the head with a level or a pressure gauge, and the flow with a bucket and a timer or a weir. Account for the pipe losses by using the net head, and allow for the water that must stay in the stream for fish and the environment. Local rules often limit how much water you may take, so ask the authority before you plan.

Using the results

Compare the power you can make with your needs. A typical home uses a kilowatt or so on average, so a few kilowatts from a stream can be useful, especially with a battery. Use the annual energy to estimate the savings or the payback. The calculator gives a first estimate that helps you decide whether a site is worth a closer look.

Checking the numbers

As a sanity check in SI units, a flow of 1 cubic metre per second falling through 1 metre is about 9.8 kilowatts before losses, since the product of 1,000, 9.81, 1 and 1 is 9,810 watts. At 70 percent efficiency that is about 6.9 kilowatts. Compare your result with this figure to see whether you have entered the units correctly. A result that is a thousand times off usually means that litres were entered as cubic metres.

Common mistakes

  • Using the gross head. Subtract the friction in the pipe to get the net head.
  • Assuming 100 percent efficiency. Real machines are between 50 and 90 percent.
  • Using a peak flow all year. Streams vary with the seasons.
  • Mixing the units. Feet go with gallons per minute, metres with cubic metres per second.

What next

Use this often? Add Hydroelectri to your Home screen.

Frequently asked questions

What is a hydroelectric power calculator?

A tool that estimates the power from a flow of water falling through a head.

What is the micro hydro formula?

P = Q × H ÷ 5,310 in kilowatts, with Q in gallons per minute and H in feet. In SI, P = η ρ g H Q.

What efficiency should I use?

Turbine efficiency is generally between 50 and 80 percent, and some designs reach 85 to 90 percent.

How much does a 1 metre drop give?

About 200 to 300 watts, according to the page on hydroelectricity.

What is the head?

The vertical distance the water falls. Use the net head, less the friction in the pipe.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools