This hoop house calculator works out the materials for a semicircular hoop house, high tunnel or polytunnel. Enter the width, length and hoop spacing, plus any extra cover you need at the sides and ends, and the hoop house calculator gives the number of hoops and their length, the center height, the size of the plastic cover, the growing area, the end wall area and the volume inside.
How to use the hoop house calculator
- Choose US or metric units. US (feet) is the default.
- Enter the width and length of the hoop house.
- Enter the hoop spacing, the distance between hoops along the length.
- Add extra cover at the sides and ends for fixing the plastic, then press Calculate.
What is a hoop house?
According to Wikipedia, a polytunnel, also called a hoop house, hoop greenhouse, grow tunnel or high tunnel, is a tunnel typically made of steel and covered in polyethylene, usually semicircular, square or elongated in shape. Inside, temperatures can be 5 to 15 °C (9 to 27 °F) above the outdoor temperature, and in colder regions such as Quebec, Canada, polytunnels extend the growing season by two to three months.
The hoop geometry
In a semicircular hoop house, each hoop is half a circle whose diameter is the width of the house. Wikipedia's article on circumference gives a circle's circumference as π times its diameter, so each hoop is:
hoop length = π × width ÷ 2
The center height is half the width. The number of hoops is the length divided by the spacing, rounded up, plus one, so there's a hoop at each end. Each end wall is a half circle with an area of π × (width ÷ 2)² ÷ 2, and the volume inside is that area times the length. The cover must stretch over one hoop plus the extra you add at each side, and run the full length plus the extra at each end.
Worked example
Take a hoop house 20 feet wide and 48 feet long, with hoops every 4 feet. Each hoop is π × 20 ÷ 2 = 31.4 feet long, and the house is 10 feet tall at the center. You need 48 ÷ 4 + 1 = 13 hoops, about 408 feet of hoop material in all. The growing area is 960 square feet, each end wall is about 157 square feet, and the volume inside is about 7,540 cubic feet. With 2 feet of extra cover at each side and 3 feet at each end, the cover needs to be about 35.4 by 54 feet.
Reading the results
The big line is the number of hoops and the length of each one. The table shows the center height, the total hoop material, the cover size, the growing area, the end wall area for framing or covering each end, and the volume, which is useful for sizing fans or heaters.
Choosing the size
A wider hoop house has more growing area and is taller in the middle, but its hoops are longer and the cover catches more wind. Closer hoop spacing makes the structure stronger against wind and snow, at the cost of more hoops. Try a few widths and spacings in the calculator to compare materials, and follow the spacing recommended for your hoops.
How width changes everything
Because a semicircular hoop's length and the house's height both grow with the width, a small change in width makes a big difference. A 14-foot-wide hoop house has hoops about 22 feet long and stands 7 feet tall, while a 30-foot-wide one needs hoops about 47 feet long and stands 15 feet tall. The end wall area grows with the square of the width, so a house twice as wide has end walls four times as large, which matters for framing, doors and heating.
Planning the cover
The cover runs over the hoops from one side to the other, so its width is the hoop length plus whatever you need to fix or bury it along each side. Its length is the length of the house plus enough at each end to fold down and fix, or to cover the end walls if you use the same sheet. Covers are often sold in set widths and lengths, so choose the next size up from the result.
Metric hoop houses
Choose metric to enter meters. A 6-meter-wide hoop house has hoops about 9.4 meters long and is 3 meters tall in the middle. At 1.2-meter spacing, a 15-meter-long house needs 14 hoops.
End walls
The end wall area tells you how much material you need to close each end, whether with plastic, polycarbonate or boards, and helps you plan a door. Remember to frame the ends so they can stand up to wind.
Common mistakes
- Forgetting the end hoop. You need one more hoop than spaces.
- Buying cover to the exact size. Allow extra to fix or bury the edges.
- Ignoring the ends. End walls need framing and covering too.
- Weak anchoring. Hoop houses act like sails in strong wind.
Tips
- Orient the hoop house to suit your site's wind and sun.
- Plan doors or roll-up sides for ventilation.
- Check local rules before building a large structure.
What next
Use this often? Add Hoop House to your Home screen.
Frequently asked questions
How does a hoop house calculator work?
It treats each hoop as half a circle: hoop length = π × width ÷ 2, and counts hoops as length ÷ spacing + 1.
How long are hoops for a 20-foot hoop house?
About 31.4 feet each for a semicircular shape.
How tall is a semicircular hoop house?
Half its width: a 20-foot-wide house is 10 feet tall in the middle.
How big a plastic cover do I need?
One hoop length plus extra at each side, by the length plus extra at each end.
How much warmer is a hoop house?
Wikipedia says polytunnels can be 5 to 15 °C (9 to 27 °F) above the outdoor temperature.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.