Saved

Press the star next to a tool's name to save it.

All my tools

Garbage Bag Size Calculator

Use this garbage bag size calculator to find the width and height of the trash bag that fits a square, rectangular or round bin, with the overhang you choose.

Restored your last values ·

Choose a square, rectangular or round bin and enter its size. The calculator gives the width and the height of the bag, measured flat, that fits it with enough overhang to tie or fold over the rim.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose the shape of your bin, enter its size and press Find bag size.

See full result

A garbage bag size calculator tells you what size of bin liner fits your bin. Choose a square, rectangular or round bin, enter its size, and the calculator gives the width and the height of the bag to buy, measured with the bag laid flat. It halves the bin's distance round to get the width, as bag makers do. It runs in your browser and nothing you enter is sent anywhere.

How to use the garbage bag size calculator

  1. Choose US or Metric units.
  2. Choose the shape of the bin: square or rectangular, or round.
  3. Enter the length and width of a rectangular bin, or the diameter of a round one, and its height.
  4. Leave the overhang blank for the default, or enter your own, and press Find bag size.

The formulas for a rectangular bin

For a square or rectangular bin, the bag width is the length of the bin plus its width. This is half of the distance round the bin, which is what a flat bag needs: bag makers say to use half of the outer circumference for the bag width.[1][2] The bag height is the height of the bin, plus the overhang, plus the bag width divided by 4. Our own working is that the last part is the extra length that covers the bottom of the bin. Bag makers use the diagonal of the bottom for a rectangular bin instead, so treat the result as a close estimate.[1]

The formulas for a round bin

For a round bin, the bag width is the diameter times pi divided by 2, which is half of the circumference.[2] The bag height is the bin height plus the overhang plus half of the diameter.[1][2] Again the last term covers the bottom: the bag has to reach from the rim down to the centre of the base and back up on the other side. The calculator uses 3.1416 for pi.

The overhang

The overhang is the part of the bag that hangs over the rim, so that you can fold it over or tie it. One bag maker says to allow about 3 to 4 inches of overhang on the outside of the receptacle,[1] and another adds 4 inches to the height.[2] Our own working is that a larger bin needs a larger overhang. The calculator uses 4 inches, or 10 centimetres, if you leave the box blank.

Worked examples

A round example is a bin 22 inches across and 30 inches high, with an overhang of 4 inches. The bag width is 22 times pi divided by 2, or about 34.6 inches, which rounds to 35. The height is 30 plus 4 plus 11, which is 45 inches. For a square bin of 20 by 20 inches that is 36 inches high with an overhang of 6 inches, the width is 40 inches and the height is 36 plus 6 plus 10, which is 52 inches. A rectangular bin of 8 by 12 by 22 inches with the default overhang needs a bag 20 inches wide and 31 inches high.

Bag thickness

A mil is one thousandth of an inch, or 0.0254 millimetres.[3] As our own rule of thumb, with no source behind it, thin bags of 0.5 to 0.9 mil are economical for everyday kitchen waste, while bags of 2 to 3 mil are better for renovation and cleaning, where there may be sharp debris. If you put heavy or sharp things in the bin, choose a thicker bag.

Choosing from the shop

Bag sizes in the shop are usually given as width by height with the bag laid flat. Compare the result of the calculator with the sizes on the pack, and choose the nearest size that is not smaller. If the bag is a little too big, you can fold the extra over the rim. If it is too small, it will slip into the bin when it is full.

Reading the result

The calculator shows the width and the height of the bag with the bag laid flat. This is the way bag sizes are normally printed on the box. If you buy bags by the roll, check whether the size on the box is the flat width or the width when opened, since some makers quote the opened width. For a bin that is not a perfect shape, such as a tapered one, measure the largest length and width and the full height, and the bag will be a little large, which is better than a bag that is too small.

Tapered and oval bins

Many kitchen bins are wider at the top than at the bottom, or have rounded corners. Measure the top opening, since that is where the bag has to stretch over the rim. For an oval bin, use the length and the width in the rectangular formula, which slightly overestimates the bag and gives a safe size.

Common mistakes

  • Using the round formula for an oval bin. Treat an oval bin as a rectangle with the same length and width.
  • Forgetting the overhang. Without it, the bag slips down.
  • Mixing units. Choose inches or centimetres first.
  • Comparing with the wrong dimension. The bag width is the flat width, not the circumference.

What next

Use this often? Add Garbage Bag to your Home screen.

Frequently asked questions

What is a garbage bag size calculator?

A tool that gives the width and height of the bin liner that fits a bin of a given shape and size.

How do you calculate the bag size for a rectangular bin?

Bag width = bin length + bin width. Bag height = bin height + overhang + bag width ÷ 4.

How do you calculate the bag size for a round bin?

Bag width = diameter × π ÷ 2. Bag height = bin height + overhang + diameter ÷ 2.

What overhang should I use?

The calculator defaults to 4 inches. One bag maker suggests about 3 to 4 inches of overhang.

What bag thickness should I choose?

A mil is one thousandth of an inch. As our own rule of thumb, 0.5 to 0.9 mil suits kitchen waste and 2 to 3 mil suits renovation or cleaning.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools