A fulcrum calculator solves the law of the lever. Enter any three of the effort force, the load force, the effort arm and the load arm, and it finds the fourth. It also gives the mechanical advantage of the lever and tells you whether it multiplies force or speed.
How to use the fulcrum calculator
- Choose what to find.
- Enter the other three values, using one force unit and one length unit.
- Press Calculate.
The law of the lever
A lever balances when the torques about the fulcrum are equal. With an effort F₁ at a distance a, and a load F₂ at a distance b, the torques are T₁ = F₁ a and T₂ = F₂ b, and since they must balance, F₁ a = F₂ b [1]. Here F₁ is the input, the effort, and F₂ the output, the load, and a and b are the perpendicular distances from the fulcrum [1].
Mechanical advantage
The mechanical advantage of the lever is MA = F₂ ÷ F₁ = a ÷ b, the output force divided by the input force, which equals the effort arm divided by the load arm [1]. If the effort arm is longer than the load arm, the lever amplifies the force, and MA is above 1. If it is shorter, MA is below 1 and the lever reduces the force. The calculator gives MA with every result.
A worked example
A load of 100 newtons at 0.5 metres from the fulcrum is balanced by an effort at 2 metres. The effort is F₁ = 100 × 0.5 ÷ 2 = 25 newtons, so the mechanical advantage is 4. You push down 4 times as far as the load rises, with a quarter of its weight. This is how a crowbar or a long wrench lets a person move a heavy object.
Finding the other values
Choose the quantity that you want. To find the load that a given effort can lift, enter the effort and the two arms. To find how long the effort arm must be, enter the effort, the load and the load arm. For the same data, 25 newtons and 100 newtons with a load arm of 0.5 metres, the effort arm is 2 metres. The units can be anything, if they are consistent.
The ideal lever
The page assumes a weightless lever and no losses due to friction, flexibility or wear [1]. In a real lever, the weight of the bar and friction at the fulcrum change the result a little. The power into an ideal lever equals the power out, so the force is traded for distance: the longer arm moves farther. The calculator gives the ideal balance, which is a good first estimate.
First class levers
The page describes three classes. In a class I lever, the fulcrum is between the effort and the load, as in a seesaw, a crowbar, scissors or a claw hammer. The mechanical advantage may be greater than, less than or equal to 1 [1]. The calculator works for any of these, as the law is the same. The class only decides on which side of the fulcrum the arms are.
Second class levers
In a class II lever, the load is between the effort and the fulcrum, as in a wheelbarrow, a nutcracker or a bottle opener. The load arm is shorter than the effort arm, so the mechanical advantage is always greater than 1, and the lever is a force multiplier [1]. For a wheelbarrow with a load at 0.5 metres and handles at 1.5 metres, MA is 3.
Third class levers
In a class III lever, the effort is between the load and the fulcrum, as in tweezers, a fishing rod or a hoe. The effort arm is shorter than the load arm, so the mechanical advantage is always less than 1, a speed multiplier [1]. It needs more force than the load, but it moves the load farther and faster. The calculator says so when MA is below 1.
Compound levers
The page notes that several levers can be used in series, with the output of one as the input of the next [1]. Scales, nail clippers and piano keys are examples. The mechanical advantages multiply. You can use the calculator for each lever in turn, and multiply the advantages to find the total, which is how the clippers get their strong cut from a gentle squeeze.
Using the calculator
Pick what you want, enter the three known values with consistent units, and press the button. The result line repeats the balance, so you can check it. Compare different arm lengths to see how a small change in the long arm greatly changes the force needed. Always check that a real lever is strong enough, as the bar itself must carry the bending loads.
Common mistakes
- Measuring the arms along the bar at an angle. Use the perpendicular distance.
- Mixing the units of force. Use one unit for both forces.
- Forgetting the weight of the lever. It adds to one side.
- Swapping the effort and the load arms. The effort arm is on the input side.
What next
Use this often? Add Fulcrum to your Home screen.
Frequently asked questions
What is a fulcrum calculator?
A tool that solves the law of the lever for the missing effort, load or arm length.
What is the law of the lever?
F₁ a = F₂ b: the torques about the fulcrum balance.
What is the mechanical advantage of a lever?
MA = F₂ ÷ F₁ = a ÷ b.
Which levers are force multipliers?
Class II levers always, and class I levers when the effort arm is longer than the load arm.
What is a class III lever?
One with the effort between the load and the fulcrum, such as tweezers; its MA is always below 1.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.