A flywheel energy calculator finds the kinetic energy stored in a spinning flywheel from its mass, its radius and its speed. Choose a solid disc, a thin ring or a thick ring. It gives the moment of inertia, the energy in joules and watt hours, the rim speed and the tensile stress at the rim.
How to use the flywheel energy calculator
- Choose US or metric units and the shape.
- Enter the mass, the radius and the speed.
- Press Calculate.
The stored energy
The kinetic energy of a flywheel is E = ½ I ω², where I is its moment of inertia and ω its angular velocity [1]. The page writes the energy of storage as W = ½ J ω², with ω = 2π n for a speed n in revolutions per second [2]. The calculator converts the rpm to radians per second and gives the energy in joules, kilojoules, watt hours and foot-pounds.
Moments of inertia
For a solid cylinder or disc, the moment of inertia is ½ m r² [1]. For a thin-walled hollow cylinder, it is about m r² [1]. The page also gives a thick-walled hollow form, whose layout in the text that we read is unclear, so we use the standard ½ m (r_e² + r_i²) for the thick ring, which is our own working. The more of the mass is at the rim, the higher I is for the same mass.
A worked example
A solid steel disc of 10 kilograms with a radius of 0.2 metres has I = ½ × 10 × 0.04 = 0.2 kilogram square metres. At 3,000 rpm, ω is 314.16 radians per second, and the energy is ½ × 0.2 × 314.16² = 9,869.6 joules, which is 9.87 kilojoules or 2.74 watt hours. A thin ring of the same mass and radius stores twice as much, 19,739 joules.
Rim speed and stress
The rim speed is v = r ω, which is 62.8 metres per second in the example. The page gives the tensile stress in a rotating rim as ρ r² ω², that is, ρ v² [1]. For steel with a density of 7,850 kilograms per cubic metre, this is 31 megapascals at 62.8 metres per second, well below the strength of steel, but it grows with the square of the speed.
Specific energy
The page gives the specific energy as E ÷ m = K σ ÷ ρ, where K is a shape factor, σ the tensile strength and ρ the density [1]. The shape factor is typically 0.3, about 0.6 for a shaftless rotor, and 1 in theory [1]. So the best material is one with a high strength for its density, such as carbon fibre composites. The energy per kilogram of the example wheel is 0.27 watt hours.
Real flywheel storage
The page on flywheel energy storage says that the specific energy of modern flywheels can reach 100 to 130 watt hours per kilogram, with commercial units at about 11 watt hours per kilogram [2]. Rotors turn at 20,000 to over 50,000 rpm in a vacuum [2], and the round-trip efficiency can be as high as 90 percent [2]. Our example wheel, at 0.27 watt hours per kilogram, is far below these.
Speeds
The page says that a steel flywheel on bearings turns at a few thousand rpm, while a carbon fibre one on magnetic bearings can reach 60,000 rpm [1]. Since the energy goes with the square of the speed, a wheel at 6,000 rpm stores four times as much as the same wheel at 3,000. The stress rises in the same way, so the limit is set by the strength of the rotor.
Units
In US mode, the mass is in pounds and the radii in inches. In metric mode they are in kilograms and millimetres. The speed is in revolutions per minute. The energy is given in joules, kilojoules, watt hours and foot-pounds. The density is in kilograms per cubic metre, and the stress in megapascals. The calculator converts everything to SI units to work out the result.
Limits
The calculator gives the energy of a rotor at a given speed. A flywheel can only deliver the energy between its working speeds, so the usable energy is the difference between the energies at the top and the bottom speed. The stress shown is for a thin rim, and it is a lower bound for a solid disc, where the stress is highest at the centre. It must not be used to judge safety.
Using the calculator
Pick the units and the shape, enter the mass, radius and speed. Read the energy, and compare it with a battery: 1 kilowatt hour is 3.6 megajoules. Check the rim speed and the stress against the material. Try doubling the speed to see the energy grow fourfold, and doubling the mass to see it double.
Comparing with other storage
One kilowatt hour is 3.6 megajoules. To store that in a steel disc of 10 kilograms and a radius of 0.2 metres, the speed would have to be about 57,000 rpm, far above what steel can take. This is our own estimate, and it shows why flywheels for storage are made of strong light composites in vacuum. For smoothing out an engine, a heavy slow wheel is enough.
Common mistakes
- Forgetting that energy goes with speed squared. Double the speed gives four times the energy.
- Using the diameter as the radius. Enter the radius.
- Ignoring the stress limit. The rim can fail.
- Counting all the energy as usable. Only the speed range is usable.
What next
Use this often? Add Flywheel Ene to your Home screen.
Frequently asked questions
What is a flywheel energy calculator?
A tool that finds the energy stored in a spinning flywheel.
What is the energy of a flywheel?
E = ½ I ω².
What is the moment of inertia of a solid disc?
I = ½ m r².
Why is the speed so important?
The energy goes with the square of the speed, and the rim stress too.
How much energy per kilogram can flywheels store?
Up to about 100 to 130 Wh/kg in advanced designs.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.