Saved

Press the star next to a tool's name to save it.

All my tools

Floor Area Ratio Calculator

Use this floor area ratio calculator to work out a building's FAR from its floor area and lot size, or the maximum floor area allowed on a lot.

Restored your last values ·

Total floor area is the gross floor area of every floor added together. Lot area is the area of the plot the building sits on.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

Enter the lot area and floor area or FAR, then press Calculate.

See full result

This floor area ratio calculator works out a building's floor area ratio (FAR) from its total floor area and lot size, or the maximum floor area you can build on a lot under a FAR limit. Enter the lot area and either the building's floor area or the allowed FAR, and the floor area ratio calculator gives the result, along with the floor space index and the floor area per floor.

How to use the floor area ratio calculator

  1. Choose US (square feet) or metric (square meters).
  2. Choose what to work out: the floor area ratio, or the maximum floor area.
  3. Enter the lot area, and the building's total floor area or the allowed FAR.
  4. Enter the number of floors if you want the floor area per floor, then press Calculate.

What is floor area ratio?

According to Wikipedia, floor area ratio is the ratio of a building's total floor area (its gross floor area) to the size of the land it's built on. Cities often set a legal limit for this ratio in their zoning codes, alongside a building-to-land ratio, to limit urban density. FAR counts all floor areas but doesn't care how they're arranged on the lot, while the building coverage ratio, or lot coverage, measures the building's footprint but not its height.

The FAR formula

FAR = gross floor area ÷ area of the plot

To find the most floor area you can build under a limit, turn it around: maximum floor area = FAR × lot area. Wikipedia notes that FAR is also called floor space ratio (FSR), floor space index (FSI), site ratio or plot ratio. FSI is written as a percentage, so a FAR of 1.5 is an FSI of 150%.

Worked example

A building with 6,000 square feet of floor space on a 5,000-square-foot lot has a FAR of 6,000 ÷ 5,000 = 1.2, an FSI of 120%. On an 8,000-square-foot lot with a FAR limit of 0.5, you could build up to 0.5 × 8,000 = 4,000 square feet of floor area, for example 2,000 square feet on each of two floors, or 4,000 square feet on one floor if lot coverage rules allow it.

The same FAR, different buildings

Because FAR only limits total floor area, the same ratio can produce very different buildings. A FAR of 1.0 allows a one-story building covering the whole lot, a two-story building covering half the lot, or a four-story building covering a quarter of it. That's why zoning codes usually combine FAR with lot coverage, setback and height limits.

History and examples

Wikipedia explains that floor area ratios emerged as an urban planning tool in Europe and the United States in the 1920s. Berlin's 1925 zoning plan set nine zone types with FAR limits from 0.2 to 3. New York City adopted FAR limits citywide in 1961; buildings from before then can exceed today's limits, such as the Empire State Building, with a FAR of 25.

Reading the results

When you work out FAR, the big number is the ratio, with the FSI percentage, total floor area and lot area in the table. When you work out the maximum, the big number is the most floor area allowed, and the table shows the FSI, the lot area and, if you entered floors, the floor area on each floor.

Building coverage versus FAR

Wikipedia contrasts FAR with the building coverage ratio, which measures the share of the lot covered by the building's footprint. A building covering half its lot has a coverage ratio of 50%. With two floors, its FAR is 1.0; with four floors, 2.0. Zoning rules often set both, so a lot might allow a FAR of 1.0 but only 40% coverage, which means at least three floors to use the full floor area.

Metric and square feet

The ratio is the same in any unit, as long as the floor area and lot area use the same one. Choose square feet or square meters to suit your plans; the calculator shows areas in that unit. If your plans mix units, convert them first: one square meter is about 10.76 square feet.

Planning with FAR

When you're buying land or planning an extension, the maximum floor area tells you how much building the zoning allows. Subtract the floor area of any existing building to see how much more you could add. Remember that other rules, such as height limits and setbacks from the lot lines, can stop you from reaching the full FAR on a small or oddly shaped lot.

FAR as a percentage

Some places express the same limit as a floor space index, a percentage. The calculator shows both, so a FAR of 0.5 also appears as 50% and a FAR of 2 as 200%, making it easy to compare with whichever form your local code uses.

Common mistakes

  • Using only the ground floor. Add up every floor.
  • Ignoring exclusions. Many codes exclude basements, parking or stairwells.
  • Mixing units. Use the same unit for floor and lot area.
  • Forgetting lot coverage. A FAR limit isn't the only rule.

Tips

  • Read your zoning code's definition of floor area.
  • Check setbacks and height limits too.
  • Ask your planning department before you design.

What next

Use this often? Add Floor Area R to your Home screen.

Frequently asked questions

How does a floor area ratio calculator work?

It divides the building's total floor area by the lot area, or multiplies an allowed FAR by the lot area to find the maximum floor area.

How do you calculate FAR?

FAR = gross floor area ÷ lot area. 6,000 sq ft of floors on a 5,000 sq ft lot is a FAR of 1.2.

What is the difference between FAR and FSI?

FSI is the same ratio written as a percentage: a FAR of 1.5 is an FSI of 150%.

How much can I build with a FAR of 0.5?

Half the lot area in total floor area: 4,000 sq ft on an 8,000 sq ft lot.

Does FAR limit building height?

Not directly. The same FAR allows a low building covering the lot or a taller one covering part of it.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools