A Fermi level calculator finds the Fermi energy of a metal from its electron density, the chance that an electron state at a given energy is occupied, and the position of the Fermi level in a doped or undoped semiconductor. It has five modes, with copper and silicon as the examples.
How to use the fermi level calculator
- Choose the mode: metal, Fermi–Dirac, intrinsic, n-type or p-type.
- Fill in the boxes that appear: electron density, or energy, Fermi level and temperature, or temperature and doping.
- Press Calculate.
What the Fermi level is
A state at the Fermi level has a 50 percent chance of being occupied [2]. At absolute zero the Fermi level takes the value known as the Fermi energy, the maximum kinetic energy of a fermion in an ideal Fermi gas [2]. This calculator treats the Fermi level in two settings: the electron gas of a metal, and the band gap of a semiconductor.
Metals: the Fermi gas
The metal case uses the free electron model. The Fermi wave number is k_F = (3π² n)^(1/3), the Fermi energy is E_F = ħ² k_F² ÷ (2 m), which is the same as (ħ² ÷ 2m)(3π² n)^(2/3), the Fermi velocity is v_F = ħ k_F ÷ m and the Fermi temperature is T_F = E_F ÷ k_B, where n is the electron number density [1]. A table at HyperPhysics lists electron densities for metals such as copper, silver, gold and aluminium [6], and the list in this tool uses densities of that kind.
A copper example
For copper, n = 8.47 × 10²⁸ per cubic metre [6]. The Fermi wave number is 1.3586 × 10¹⁰ per metre, the Fermi energy is 7.033 eV, the Fermi velocity is 1.573 × 10⁶ m/s and the Fermi temperature is about 81,600 K. HyperPhysics lists 7.00 eV, 1.57 × 10⁶ m/s and 8.16 × 10⁴ K for copper, which agrees to its rounding [6]. The unrounded figures are our own calculation with the formulas above.
Constants
The tool uses the exact SI values of the Boltzmann constant, 1.380649 × 10⁻²³ J/K, and of the Planck constant, together with the current value of the electron mass.
The Fermi–Dirac function
The occupation probability is f(E) = 1 ÷ (exp((E − E_F) ÷ (k_B T)) + 1) [3]. At E = E_F the exponent is zero, so it equals one half at any temperature. For copper with E_F = 7.033 eV at 300 K, an energy of 7.1 eV gives f = 0.0697, and 7.0 eV gives about 0.78. These values are our own results. The thermal energy k_B T is only 0.0259 eV at room temperature, so the step is sharp.
Semiconductors: intrinsic
For an undoped semiconductor, the number of electrons equals the number of holes, n = p, which is the definition of the intrinsic case. The effective densities of states are Nc = 2 (2π mₑ k T ÷ h²)^(3/2) and Nv with the hole mass, and nᵢ = √(Nc Nv) exp(−Eg ÷ (2 k T)) [5]. The intrinsic Fermi level is near mid-gap, at (E_c + E_v) ÷ 2 + (k T ÷ 2) ln(Nv ÷ Nc) [5], which is the same as (E_c + E_v) ÷ 2 + (3 k T ÷ 4) ln(mₚ ÷ mₑ) when both bands have a single valley. That last equivalence is our own working.
Silicon at 300 K
With the effective masses 1.08 and 0.81 and the gap of 1.12 eV, the tool gives nᵢ of 8.88 × 10⁹ per cubic centimetre at 300 K with exact constants. If the gap is left blank, the tool uses a temperature-dependent gap of the Varshni form, Eg = 1.166 − 4.73 × 10⁻⁴ T² ÷ (T + 636) eV, and nᵢ is then 8.79 × 10⁹. The Varshni form is a general fit for band gaps, but we did not check these silicon constants in a source, so type your own gap if you need a reference value. The intrinsic Fermi level lies about 5.6 meV below mid-gap. These figures are our own calculation.
Doped semiconductors
In n-type material, the Fermi level lies closer to the conduction band than to the valence band, and in p-type material it lies closer to the valence band [4]. We take n ≈ Nd, with every donor ionised, which gives E_c − E_F = k T ln(Nc ÷ Nd) and E_F − E_i = k T ln(Nd ÷ nᵢ). For p-type material with p ≈ Na, E_F − E_v = k T ln(Nv ÷ Na). These are our own working, not on the pages. For 10¹⁶ donors per cubic centimetre, the Fermi level is 0.205 eV below the conduction band.
When the formulas fail
The formulas need the Fermi level to be more than about 3 k T away from the band edge, which is the Boltzmann approximation, our own working. For heavy doping the semiconductor becomes degenerate, and for light doping near nᵢ the approximation n = Nd breaks down. The calculator gives a warning in both cases. It also ignores incomplete ionisation and the change of effective mass with temperature.
Using the calculator
Choose a mode and press the button. In the metal mode, a list holds the 17 metals, so you do not have to type the density. In the other modes, keep the silicon defaults or enter another material's gap and effective masses. Try raising the doping to see the Fermi level move to the band edge and the warning appear, or the temperature to see the occupation spread.
Reading the Fermi temperature
The Fermi temperature is not a real temperature of the metal. It is the Fermi energy divided by the Boltzmann constant, a way to compare the energy scale of the electrons with the thermal energy [1]. For copper it is about 81,600 K, hundreds of times room temperature, so the thermal smearing of the Fermi–Dirac step is tiny and only the electrons near the Fermi level can take part in conduction. This reading is our own remark, based on the figures above.
Common mistakes
- Entering the density in per cubic centimetre for a metal. The metal density is in 10²⁸ per cubic metre.
- Using eV and joules together. The Fermi–Dirac mode takes eV.
- Applying the doping formulas near the band edge. The warning shows when they fail.
- Expecting a value for an insulator or a metal's band. The modes cover only the cases listed.
What next
Use this often? Add Fermi Level to your Home screen.
Frequently asked questions
What is a Fermi level calculator?
A tool that finds the Fermi energy of a metal, the occupation probability of an energy state, and the Fermi level of a semiconductor.
What is the formula for the Fermi energy of a metal?
E_F = ħ² k_F² ÷ (2 m), with k_F = (3π² n)^(1/3) and n the electron number density.
What is the Fermi–Dirac distribution?
f(E) = 1 ÷ (exp((E − E_F) ÷ (k_B T)) + 1), the probability that a state of energy E is occupied.
Where is the Fermi level in an n-type semiconductor?
Closer to the conduction band than to the valence band, at E_c − E_F = k T ln(Nc ÷ Nd) when every donor is ionised.
What constants does the tool use?
Exact SI values for the Boltzmann and Planck constants and the current electron mass.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.