Saved

Press the star next to a tool's name to save it.

All my tools

Fence Stain Calculator

Use this fence stain calculator to find how much stain a picket or box fence needs from its height, length, sides, coats and coverage, with the cost when you add a price.

Restored your last values ·

Choose a picket or a box fence and how many sides you will stain. Enter the height and the length of the fence. Leave the coverage blank for the default of 250 square feet per gallon, and add a price to get the cost.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose the fence type and sides, enter the height and length, then press Calculate.

See full result

A fence stain calculator estimates how much stain a fence needs from its height, its length, the number of sides you will stain and the coverage of the product. Choose a picket or a box fence, add the number of coats and, if you know it, the price of a gallon, and you get the stain needed and the cost. The area step is plain geometry, and the coverage figures come from manufacturer guidance [1][2].

How to use the fence stain calculator

  1. Choose US or metric units.
  2. Pick the fence type, picket or box, and the sides to stain.
  3. Enter the height and the length of the fence.
  4. Enter the coverage, the coats and the price if you know them.
  5. Press Calculate.

How the area is found

The area of one side of the fence is its length times its height. If you stain both sides, the area is doubled. A fence 5 feet high and 120 feet long has 600 square feet on one side and 1,200 square feet on both sides. The tool multiplies the area by the number of coats at the end, so the sides, the fence type and the coats all combine into one total area of stain to apply.

Picket and box fences

The tool has two fence types. For a picket fence, the area is used as measured. For a box fence, where the boards form a solid screen, the tool multiplies the area by 1.5 to allow for the extra boards and edges. That factor is our own planning allowance, and we found no published figure for it, so change the height or length if you know better. The tool does not model the gaps between pickets: what you measure is what you get. It has only these two fence types.

From area to gallons and cost

The stain needed is the total area divided by the coverage of one gallon. Sherwin-Williams says that one gallon of stain typically covers about 250 to 350 square feet, depending on the wood [1], so the tool's default of 250 square feet per gallon is at the cautious end. The cost is the gallons times the price of a gallon, our own arithmetic. In the tool, a blank coverage box uses the 250 default, and a blank price box skips the cost. The cost is for the exact gallons needed, before sales tax and before the rounding up of the buy line, which is our own rule.

A worked example

Take a fence 5 feet high and 120 feet long, stained on both sides. The area is 600 square feet on one side and 1,200 square feet on both sides. Divided by 250 square feet per gallon, that is 4.8 gallons, and at 32 dollars a gallon the cost is 153.60 dollars. This example is our own, and the tool's buy line tells you to get 5 gallons, because the rounding up goes to the next quarter gallon.

One side or both

Take a fence 5 feet high and 100 feet long. Stained on one side with one coat, it has 500 square feet and needs 2 gallons at 250 square feet per gallon. Stained on both sides, it has 1,000 square feet and needs 4 gallons, which at 40 dollars a gallon costs 160 dollars. Use the sides box to switch between the two, and remember that a fence that borders a neighbour may let you reach only your own side.

Coverage differs between products

Manufacturers give wide ranges. Sherwin-Williams says that one gallon typically covers about 250 to 350 square feet, depending on the wood type [1]. Cabot lists a range of 200 to 650 square feet per gallon for its semi-transparent stain and sealer [2]. The default of 250 sits inside both ranges. These ranges are broad, and the number on your can is better than any average, so type it into the coverage box. Rough or weathered boards soak up more stain, so use the low end for them.

How many coats to enter

Sherwin-Williams says that most decks need one to two coats [1], and Cabot recommends one coat of its semi-transparent stain and sealer [2]. The tool has a coats box, which is blank for one coat. Enter 2 if your label asks for two coats. The result is the exact amount, multiplied by the coats.

A box fence example

This example is our own. A box fence 6 feet high and 80 feet long, stained on both sides, has 6 × 80 = 480 square feet per side and 960 square feet on both sides. The box factor of 1.5 raises this to 1,440 square feet. At 250 square feet per gallon, that is 5.76 gallons for one coat and 11.52 gallons for two coats, and the buy line says 11.75 gallons.

Metric units

In metric mode you enter the height and length in metres, the coverage in square metres per litre and the price per litre. The default is 250 square feet per gallon converted exactly, which is 6.136 square metres per litre. You can type the coverage from your own can into the coverage box in either mode.

Limits of the estimate

The tool uses exactly what you measure. Coverage depends on the stain, the type of wood and how weathered the boards are, so the answer is an estimate. The tool does not model the gaps between pickets, posts, rails or caps.

Common mistakes

  • Forgetting the second side. The default is both sides, so choose one side if only one will be stained.
  • Using a picket fence for a solid box fence. A box fence needs about 50 percent more stain.
  • Ignoring the coats. Some labels ask for two coats, so enter 2 if yours does.
  • Trusting the default coverage. Type the figure from your can when you have it.

What next

Use this often? Add Fence Stain to your Home screen.

Frequently asked questions

What is a fence stain calculator?

A tool that turns the height, length and sides of a fence into the stain needed, using the coverage per gallon and the number of coats.

How much stain do I need for a 100 foot fence?

For a fence 5 feet high and 100 feet long at 250 square feet per gallon, one side needs 2 gallons and both sides need 4 gallons.

How many gallons does a box fence need?

The tool multiplies the area of a box fence by 1.5, our own planning allowance, so a box fence needs about 50 percent more stain than a picket fence of the same size.

How many square feet does a gallon of fence stain cover?

The tool defaults to 250 square feet per gallon. Sherwin-Williams gives about 250 to 350 and Cabot 200 to 650, so use the figure on your can.

How much does it cost to stain a fence?

Enter your own price. At 40 dollars a gallon, the 4 gallons for a 100 foot fence stained on both sides cost 160 dollars.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools