An engine displacement calculator finds the displacement of an engine from its bore, its stroke and the number of cylinders. It gives the answer in cubic centimetres, litres and cubic inches, and works in inches or millimetres. The bore-to-stroke ratio is shown as well.
How to use the engine displacement calculator
- Choose US or metric units.
- Enter the bore, the stroke and the number of cylinders.
- Press Calculate.
The definition
Engine displacement is found by multiplying together three values: the distance travelled by the piston, which is the stroke length, the circular area of the cylinder, and the number of cylinders in the whole engine [1]. The area of the cylinder is π (bore ÷ 2)², which is the same as π ÷ 4 times the bore squared. The page's own typesetting of the formula is garbled, so we have written the standard form.
The formula
In symbols, V = π ÷ 4 × bore² × stroke × number of cylinders. For an engine with a bore of 86 millimetres, a stroke of 86 millimetres and four cylinders, the displacement is 1,998.2 cubic centimetres, about 2.0 litres. These are the square dimensions that are typical of many four-cylinder engines. The calculation is our own example.
A US example
A V8 with a bore of 4.00 inches and a stroke of 3.48 inches has a displacement of 349.85 cubic inches, which is the well-known 350 cubic inch engine. In cubic centimetres, that is 5,732.98, or 5.73 litres. The page lists an engine in a US classic car of 353 cubic inches as 5.8 litres [1], and a 5.7 litre engine in a sports car [1], which are of the same type.
Units
The page gives displacement in cubic centimetres, in litres, and, particularly in the United States, in cubic inches [1]. The calculator shows all three. One cubic inch is 16.387064 cubic centimetres, a value of our own that agrees with the paired figures on the page: 50 cc is 3.1 cubic inches and 1,549 cc is 94.5 cubic inches [1].
Small engines
Small engines are known by their displacement in cubic centimetres. The page gives a 50 cc scooter engine, a 125 cc motorcycle and a 2,500 cc motorcycle engine of 2.5 litres as examples [1]. A single-cylinder engine with a bore of 39 millimetres and a stroke of 41.8 millimetres has 49.9 cubic centimetres, which you can try in the calculator.
Bore and stroke
The ratio of the bore to the stroke, which the calculator shows, describes the shape of the engine. A ratio above 1, an oversquare engine, has a wide cylinder and a short stroke, which allows high speeds. A ratio below 1, an undersquare engine, has a long stroke, which gives torque at low speeds. The definition of the ratio is our own, as the page does not define it.
Larger engines
Displacement ranges from tens of cubic centimetres to many litres. The page gives fire trucks with engines of 6 to 15 litres [1]. A bigger displacement does not always mean more power, since power also depends on the speed, the air supply and the fuel. Use the figure as a measure of size.
What it does not include
The displacement is the swept volume only. It does not include the volume of the combustion chamber above the piston at the top of its stroke, which together with the swept volume gives the compression ratio. For a rotary engine, the page notes an effective displacement that differs from the measured one [1], so this calculator is for piston engines.
Using the calculator
Select the units and enter the three values. The result is shown in cubic centimetres first, then litres and cubic inches. Check the working line to see the numbers that were used, including the bore-to-stroke ratio. To compare engines, try several combinations of bore and stroke that give the same displacement.
Checking against the rating
Compare the result with the engine's published displacement. The published figure is rounded, so a difference of a few cubic centimetres is normal. A larger difference suggests that the bore or the stroke is not the standard one, or that the engine has been bored out, which increases the bore and so the displacement.
Equal displacements, different engines
Many combinations of bore and stroke give the same displacement. A single cylinder of 100 millimetres bore and 100 millimetres stroke, in a four-cylinder engine, makes 3.14 litres, while a bore of 90 millimetres and a stroke of 123.5 millimetres makes the same. The long-stroke design has more low-speed torque and the short-stroke design revs higher. The calculator lets you find a stroke for a given bore and displacement by trial.
Rounding in published figures
Makers round the figure to the nearest 10 cubic centimetres or to a convenient litre value, so a 2.0 litre engine may be 1,998 or 1,984 cubic centimetres. The calculator gives the exact swept volume from the dimensions, which is useful when you check or compare real figures.
Common mistakes
- Using the radius as the bore. The bore is the diameter.
- Mixing inches and millimetres. Check the units.
- Forgetting a cylinder. Count all of them.
- Confusing swept volume with total volume. Chambers are not included.
What next
Use this often? Add Engine Displ to your Home screen.
Frequently asked questions
What is an engine displacement calculator?
A tool that finds the swept volume of an engine from its bore, stroke and cylinders.
What is the formula for engine displacement?
V = π ÷ 4 × bore² × stroke × number of cylinders.
How many cc is a cubic inch?
16.387 cubic centimetres.
What is the displacement of a 4.00 by 3.48 inch V8?
About 349.8 cubic inches, which is 5.73 litres.
What is the bore-to-stroke ratio?
The bore divided by the stroke; above 1 is oversquare.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.