Saved

Press the star next to a tool's name to save it.

All my tools

Engine Compression Ratio Calculator

Use this engine compression ratio calculator to find the compression ratio from the bore, stroke and clearance volume, the engine displacement, and the clearance volume for a target ratio.

Restored your last values ·

Choose US or metric units. Enter the bore, the stroke and the number of cylinders, then the clearance volume to get the compression ratio, or a target ratio to get the clearance volume you need.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the bore, the stroke and the clearance volume, then press Calculate.

See full result

An engine compression ratio calculator finds the compression ratio from the bore, the stroke and the clearance volume of the combustion chamber. It also gives the displacement of one cylinder and of the whole engine, and works backwards to the clearance volume that gives a target ratio.

How to use the engine compression ratio calculator

  1. Choose US or metric units.
  2. Enter the bore, the stroke and the number of cylinders.
  3. Enter the clearance volume, or a target ratio.
  4. Press Calculate.

The formula

The compression ratio is CR = (V_d + V_c) ÷ V_c, where V_d is the displacement volume, the volume swept by the piston from the bottom to the top of its stroke, and V_c is the clearance volume, the space left at the end of the compression stroke [1]. The displacement volume of one cylinder is V_d = (π ÷ 4) × bore² × stroke [1], and the total displacement of the engine is that times the number of cylinders [2].

The clearance volume

The clearance volume is the space above the piston at the top of its stroke. It includes the combustion chamber in the head, the thickness of the head gasket, the space around the piston top and the volume of any dish or dome in the piston. It is measured in cubic centimetres, which the calculator uses for both unit systems. A smaller clearance volume gives a higher ratio.

A worked example

An engine with a bore of 86 millimetres, a stroke of 86 millimetres and 4 cylinders has a displacement of 499.56 cubic centimetres per cylinder, and 1,998 cubic centimetres in total, about 2.0 litres. With a clearance volume of 55.5 cubic centimetres the compression ratio is (499.56 + 55.5) ÷ 55.5, which is 10.0 to 1. Working backwards, a ratio of 10 needs a clearance volume of 55.5 cubic centimetres. These are our own calculations.

Solving for the clearance volume

Rearranging the formula gives V_c = V_d ÷ (CR − 1), our own algebra. Use this mode to find how much volume you need in the combustion chamber to reach a given ratio, for example when choosing a head gasket or machining the head. For a diesel at 18 to 1, the example cylinder needs only 29.4 cubic centimetres.

Typical ratios

The page says that for petrol passenger cars over the past 20 years the compression ratio has typically been between 8 to 1 and 12 to 1, and up to 16 to 1 in some Mazda SkyActiv engines [1]. Direct-injection diesel engines run between 14 to 1 and 23 to 1, and indirect-injection diesels between 18 to 1 and 23 to 1 [1]. Racing motorcycles reach 14.7 to 1, and methanol and ethanol racing engines 14 to 1 to 16 to 1 [1]. Use these as a guide to check your result.

Static and dynamic

The ratio from this formula is the static compression ratio. The page notes that it ignores the timing of the intake valve, and that the dynamic compression ratio is usually, but not always, lower [1]. The valves of a performance engine may stay open into the start of the compression stroke, reducing the amount of mixture that is really compressed. The calculator gives the static value, which is what engine builders quote.

Displacement

The displacement of an engine is the stroke times the area of the bore times the number of cylinders [2]. The calculator shows it in cubic centimetres, litres and cubic inches. Displacement excludes the combustion chamber volume, and does not describe rotary engines well, which have a different geometry [2].

Why the ratio matters

A higher compression ratio makes an engine more efficient, because the gas is expanded from a higher pressure, but it raises the risk of knock in petrol engines, so the fuel octane rating must suit it. Diesels use high ratios because the heat of compression ignites the fuel. Use the calculator to plan a change and then check the limits with the maker of the engine or a qualified builder.

Effect of changes

Machining the head or the block, using a thinner head gasket or fitting different pistons changes the clearance volume and therefore the ratio. Removing 2 cubic centimetres from the 55.5 of the example raises the ratio from 10.0 to about 10.3. Changing the stroke changes the displacement. Run the calculator for each change to see the effect before you commit to a modification.

Fuel and the ratio

A higher ratio asks for a higher octane fuel in a petrol engine to avoid knocking, while diesel engines work at high ratios by design. Follow the fuel requirement in the engine's manual, and ask a specialist before raising the ratio of a road engine.

Measuring the clearance volume

Builders find the clearance volume by burette: with the piston at the top of its stroke, they fill the space above it with a measured liquid until it is full, and note the volume. Add the volume of the head gasket and any other part. Enter the total in cubic centimetres, and the calculator gives the compression ratio that results.

Common mistakes

  • Using the combustion chamber volume alone. Add the gasket and piston dish effects.
  • Mixing inches and millimetres. Check the units setting.
  • Forgetting the number of cylinders. The displacement is for the engine.
  • Comparing static and dynamic ratios. The dynamic one is usually lower.

What next

Use this often? Add Engine Compr to your Home screen.

Frequently asked questions

What is an engine compression ratio calculator?

A tool that finds the compression ratio from the swept and clearance volumes of a cylinder.

What is the compression ratio formula?

CR = (V_d + V_c) ÷ V_c, where V_d is the displacement volume and V_c the clearance volume.

How do I find the displacement of a cylinder?

V_d = π ÷ 4 × bore² × stroke.

What is a typical compression ratio?

8:1 to 12:1 for petrol cars and 14:1 to 23:1 for diesels.

What is the difference between static and dynamic compression?

The static ratio ignores valve timing. The dynamic ratio, which accounts for it, is usually lower.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools