A Debye length calculator finds the distance over which electric charges are screened in a plasma or an electrolyte. For a plasma, enter the electron temperature and density. For a salt solution in water, enter the ionic strength. The result tells you how far the electric field of a charge reaches.
How to use the Debye length calculator
- Choose a plasma or an electrolyte.
- Enter the temperature and density, or the ionic strength.
- Press Calculate.
What it is
In a plasma or an electrolyte, mobile charges gather round any charge and screen its field. The Debye length is the distance over which the screening takes place. Beyond a few Debye lengths, the field of an extra charge is practically gone. It is a basic length of plasma physics, since it tells you at what scale a plasma behaves as electrically neutral.
The formula
For a plasma with one kind of charge carrier, the page gives λ_D² = ε₀ k_B T ÷ (n q²), so λ_D = √(ε₀ k_B T ÷ (n q²)) [1]. Here n is the density of the carriers and q their charge. For a cold quasineutral plasma, the electron term alone is kept: λ_D = √(ε₀ k_B T_e ÷ (n_e q_e²)) [1]. The page says that the ion term is often dropped, valid only when the ions are slow [1].
The constants
The page names ε₀, k_B and e but gives no values. We use ε₀ = 8.8541878 × 10⁻¹² farads per metre, the Boltzmann constant of 1.380649 × 10⁻²³ joules per kelvin and the elementary charge of 1.602177 × 10⁻¹⁹ coulombs, from our own knowledge. The density can be in cubic metres or cubic centimetres, and the temperature in kelvin or electronvolts, where 1 electronvolt is 11,604.5 kelvin.
Examples from the page
The page gives a table of orders of magnitude. The solar wind, with a density of 10⁶ per cubic metre and a temperature of 10⁵ kelvin, has a Debye length of about 10 metres. The ionosphere, with 10¹² and 10³ kelvin, has about 10⁻³ metres. A tokamak, with 10²⁰ and 10⁸ kelvin, has about 10⁻⁴ metres, and the intergalactic medium has about 10⁵ metres [1]. The calculator gives the exact values, 21.8 metres, 2.18 millimetres and 69 micrometres, for the first three.
The practical formula
The page gives a handy form, λ_D ≈ 740 √(T_e ÷ n_e) centimetres, with T_e in electronvolts and n_e in inverse cubic centimetres [1]. For 1 electronvolt and 10¹² per cubic centimetre, this gives 7.4 × 10⁻⁴ centimetres, which is 7.43 micrometres, the same as the calculator's 7.434. The formula is useful for quick estimates.
Electrolytes
In a salt solution in water, the screening length, also called the Debye length, is κ⁻¹ = √(ε_r ε₀ k_B T ÷ (2 e² I)), with I the ionic strength [1]. The page gives the rule for water at room temperature: κ⁻¹ in nanometres ≈ 0.304 ÷ √I with I in moles per litre [1]. At 0.1 molar, the length is 0.961 nanometres, and in pure water it is about 1 micrometre.
Bjerrum length
The page also gives the Bjerrum length, which for deionized water at pH 7 is about 0.71 nanometres [1]. This is the distance at which the electric energy between two unit charges equals the thermal energy. The Debye length is much larger than it in dilute solutions, which is why charged colloids and biomolecules interact over long ranges at low salt.
Limits
The Debye length is valid only when there are many particles in a sphere of its radius, which is true for plasmas that are not too dense and cold. It assumes a mean-field picture, with thermal equilibrium. Solids and very dense plasmas need other lengths, such as the Thomas–Fermi length, which the page names [1]. For most uses, the formulas here are a good guide.
Using the calculator
Select a plasma or an electrolyte. For a plasma, enter the temperature in kelvin or electronvolts and the density per cubic metre or per cubic centimetre. For an electrolyte, enter the ionic strength. Compare the Debye length with the size of your system: if the system is much larger, the plasma is quasineutral inside.
What the length tells you
A plasma behaves as electrically neutral on scales larger than the Debye length, and charge separation can occur on smaller scales. A plasma is usually defined as an ionized gas that is much larger than its Debye length, and that has many particles inside a Debye sphere. The calculator gives the length, which you can compare with the size of your device or the region that you study.
Temperature and density
The Debye length grows with the square root of the temperature and falls with the square root of the density. Making the plasma four times as hot doubles the length, and making it four times as dense halves it. In practice, hot, thin plasmas such as the solar wind have long Debye lengths, and cold, dense ones such as those in the lab have short ones. You can see the effect by changing one value at a time.
Common mistakes
- Using the wrong density unit. Check m³ or cm³.
- Using the ion temperature. The simple form uses electrons.
- Applying the rule to dense solids. Use another length.
- Forgetting that I is in mol/L. Ionic strength is in moles per litre.
What next
Use this often? Add Debye Length to your Home screen.
Frequently asked questions
What is a Debye length calculator?
A tool that finds the distance over which electric charges are screened.
What is the Debye length formula for a plasma?
λ_D = √(ε₀ k_B T ÷ (n q²)).
What is the practical plasma formula?
λ_D ≈ 740 √(T_e ÷ n_e) cm, with T_e in eV and n_e in cm⁻³.
What is the Debye length in water?
About 0.304 nm ÷ √I, with I in mol/L.
What is the Debye length of the solar wind?
About 10 m, to an order of magnitude.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.