Saved

Press the star next to a tool's name to save it.

All my tools

Curtain Size Calculator

This curtain size calculator works out rod width, total curtain width at your chosen fullness, panels needed and finished length, in inches or centimeters.

Restored your last values ·

If you leave the rod extension blank, 4 inches (10 cm) each side is used, the minimum Bali suggests beyond the glass. Measure the drop from where the top of the curtain will hang.

Worked out in your browser. Nothing is sent anywhere.

Curtain size

–

Enter the window width and the drop, then press Calculate.

See full result

A curtain size calculator works out how wide and how long your curtains should be. Enter your window width, how far the rod should extend past the window, the fullness you want and the drop from the rod to the floor, and this curtain size calculator gives the rod width, the total curtain width, the width for each side of a pair, how many panels to buy, the finished length and the closest ready-made length. Inches are the default, with centimeters a click away.

Curtain width: rod, extension and fullness

Curtain width isn't just the width of the window. Start with the area the curtains should cover, which is the width of the rod. Bali's guide says the rod should extend at least four inches beyond the glass on each side, so the minimum rod width is the glass width plus eight inches. The Shade Store notes that for an outside mount the rod typically extends past the window frame by about 6 to 12 inches, which lets you pull the curtains fully off the window to let in more light and makes the window look larger.

Next comes fullness: how lush the curtains look when closed. The Shade Store recommends multiplying the width the curtains will cover by 1.5 or 2 for most fabrics, and by about 2.5 or 3 for thin materials such as sheers. For example, a rod spanning 60 inches needs between 90 and 120 inches of total curtain width. Stationary side panels that never close can be narrower.

Stack back

Stack back is the space the curtains take up when they're gathered at the sides of the window. Bali puts stack back at about one third of the glass width, and suggests the rod width should equal or exceed the glass width plus the stack back for a balanced look. A wider rod gives a wider stack back, which can make a window look bigger and suits heavy fabrics. The calculator shows the stack back for your window so you can check the rod is wide enough.

Curtain length

Measure from where the top of the curtain will hang down to where you want it to end. Bali describes the common choices:

  • Sill length: to the windowsill, typically for inside mounts.
  • Apron length: to the bottom of the window apron, typically for outside mounts.
  • Floor length: about ½ inch above the floor.
  • Trouser length: to the floor plus about 2 inches, so the curtain breaks on the floor like a trouser leg on a shoe.
  • Puddle length: to the floor plus 6 to 10 inches, so fabric pools on the floor. The calculator adds 8 inches.

For sill or apron length, measure to that point and choose Exactly where I measured.

Ready-made lengths

Ready-made curtains are usually sold in standard lengths such as 63, 84, 96, 108 and 120 inches. The Shade Store suggests 63 inches for sill or apron length in kitchens, bathrooms and small windows, and 84 inches for standard windows with the rod just above the frame. The calculator shows the ready-made length closest to your result, so you know which size to look for.

How high to hang the rod

A good rule of thumb from The Shade Store is to hang the rod a little more than halfway, or about two-thirds of the way, up between the top of the window and the ceiling. Hanging higher than the frame makes the window and room look taller. With cathedral ceilings, about 8 to 10 inches above the frame works; with low ceilings, hang at the ceiling or mount the rod on it; with crown molding, hang just below it. Decide the rod height before you measure the drop.

How to use the curtain size calculator

  1. Choose inches or centimeters.
  2. Enter the window width, measuring the glass or frame.
  3. Enter the rod extension for each side, or leave it blank to use 4 inches.
  4. Pick the fullness for your fabric.
  5. Enter a panel width if you're buying ready-made panels, to see how many you need.
  6. Enter the drop from the rod to the floor and pick how the curtain should end.
  7. Press Calculate.

Worked example

A window is 60 inches wide. With a 6-inch extension on each side, the rod is 72 inches. At 2× fullness, you need 144 inches of curtain in total: 72 inches for each side of a pair. With 50-inch panels, that's 4 panels, two each side. The rod is 84 inches above the floor, and for floor-length curtains the finished length is 83½ inches, so 84-inch ready-made curtains are the closest size. The stack back is about 20 inches.

Rod projection

Projection is how far the rod stands out from the wall. Bali notes that for most curtains it's three to four inches. More than that lets too much light through the gap between the wall and the curtain; less, and the curtain may bunch up against the wall. Check that your brackets give enough room for any window trim or blinds behind the curtains.

Common mistakes

  • Measuring only the glass for the rod width.
  • Buying one panel per window when you need fullness.
  • Measuring the drop before deciding the rod height.
  • Including finials in the rod width.

What next

Use this often? Add Curtain Size to your Home screen.

Frequently asked questions

How does the curtain size calculator work?

It adds the rod extension to your window width, multiplies by the fullness for the total curtain width, and adjusts the drop for the ending you choose to give the curtain length.

How wide should curtains be?

Most fabrics look best at 1.5 to 2 times the width they cover; sheers may need 2.5 to 3 times.

How far should a curtain rod extend past the window?

At least 4 inches beyond the glass on each side, and often 6 to 12 inches past the frame for an outside mount.

What are standard curtain lengths?

Ready-made curtains are commonly 63, 84, 96, 108 and 120 inches long.

How much longer are puddle curtains?

Puddle length adds about 6 to 10 inches past the floor; trouser length adds about 2 inches.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools