Saved

Press the star next to a tool's name to save it.

All my tools

Corn Yield Calculator

Use this corn yield calculator to estimate bushels per acre from ears counted in 1/1000 acre, kernel rows per ear and kernels per row, before harvest.

Restored your last values ·

Count the harvestable ears in a length of row that equals 1/1000 of an acre, then find the average number of kernel rows per ear and kernels per row. Choose how many kernels make a bushel, and the calculator gives the yield in bushels per acre.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the ears counted, the kernel rows per ear and the kernels per row, then press Estimate the yield.

See full result

A corn yield calculator turns a quick field count into an estimate of bushels per acre. You count the ears in a measured length of row, the kernel rows on each ear and the kernels in each row, and choose how many kernels make a bushel. The result is a pre-harvest guide.

How to use the corn yield calculator

  1. Choose US or Metric.
  2. Count the harvestable ears in a length of row that equals 1/1000 of an acre, and enter the count.
  3. Enter the average kernel rows per ear and kernels per row from several ears.
  4. Pick the kernels per bushel, add a row spacing and field size if you want them, and press Estimate the yield.

The yield component method

The method multiplies three counts. North Dakota State University tells growers to count the harvestable ears in 1/1000 of an acre, the average number of kernel rows per ear and the average number of kernels per row, multiply them together and divide by 90 [1]. Iowa State gives the same equation in full: ears per acre multiplied by kernel rows per ear multiplied by kernels per row, all divided by 90,000 kernels per bushel [2]. Because the sample is 1/1000 of an acre, the count of ears times 1,000 is the number of ears per acre, which is why the divisor drops from 90,000 to 90.

Finding 1/1000 of an acre of row

To find the row length for the sample, divide 43,560 square feet by the row spacing in feet, then divide that result by 1,000, which is our own working. At 30 inch rows that is 17 feet 5 inches, and at 36 inch rows it is 14 feet 6 inches, the lengths North Dakota State gives [1]. Iowa State quotes the same 17 feet 5 inches for 30 inch rows [2]. The calculator shows this length when you enter a row spacing. In metric mode it uses 1/1000 acre as 4.0469 square metres, which is our own conversion of the same rule.

A worked example

The North Dakota page works through 24 ears, 16 kernel rows and 30 kernels per row [1]. Multiply 24 by 16 by 30 to get 11,520, then divide by 90 to get 128 bushels per acre [1]. The calculator returns 128 for those numbers with 90,000 kernels per bushel. With a divisor of 100,000 kernels the same count gives 115.2, and the page itself says about 115 [1].

Choosing the kernels per bushel

The divisor of 90,000 kernels per 56 pound bushel is the standard figure [1]. Iowa State calls the number an assumption that varies with the hybrid and the growing conditions [2]. North Dakota suggests a divisor of 100 (100,000 kernels) after stress and 75 (75,000 kernels) in a year of excellent grain fill with larger kernels [1], and Iowa State mentions 100,000 to 120,000 in high stress years [2]. The calculator lets you pick 75,000, 80,000 (our own middle value), 90,000, 100,000 or 120,000 and also lists the yield at every one of them.

Kernels per ear and field size

The same estimate can be written as field size times the kernels per ear times the ears per acre, divided by the kernels per bushel. Kernels per ear is simply kernel rows times kernels per row. This rearrangement is our own working. For one ear with 20 rows of 40 kernels, that is 800 kernels, counted in 1/1000 acre with 90,000 kernels per bushel, and the result is 800 × 1,000 ÷ 90,000 = 8.89 bushels per acre, or 88.9 bushels on 10 acres. You can reproduce it here with one ear, 20 rows, 40 kernels per row and a 10 acre field.

From bushels to totals

Corn is sold by the bushel, and the standard divisor is tied to a 56 pound bushel [1]. The calculator multiplies the yield by the field size to get the total bushels, then by 56 to get pounds. For 10 acres at 128 bushels per acre that is 1,280 bushels and 71,680 pounds, which is our own multiplication of the stated figures. In metric mode the yield also appears in kilograms per hectare, using 56 pounds as 25.40 kilograms and one acre as 0.4047 hectare, so one bushel per acre is about 62.77 kilograms per hectare.

Taking a good sample

One count tells you about one spot. Walk into the field, take the count at several places that look typical, and average the ears, rows and kernels before you enter them. This advice on averaging is our own working, since the pages we read describe the method rather than a sampling plan. Count only ears that would be harvested, and skip tip-back ears or ears with few kernels so that the result is not inflated.

What the pages do not say

North Dakota State says the method is accurate to about 20 bushels per acre and suits general planning only [1]. The pages we read do not state the grain moisture that the 56 pound bushel assumes. Moisture matters when you compare the estimate to a delivery ticket. The kernels per bushel is also a judgment, and moving from 90,000 to 100,000 changes the answer by about 10 percent, so the spread shown by the calculator is as important as the single number.

Limits of the estimate

The estimate is made before harvest from a handful of plants. It cannot see ear loss during harvest, later weather, lodging or machine setting, so a combine yield can differ by a wide margin. Treat it as a planning figure for storage, marketing and agronomy discussions, and compare it with your own field history. The tool keeps your numbers in your browser and sends nothing.

Common mistakes

  • Counting a different length of row. The 1/1000 acre length depends on the row spacing, so use the length shown in the result.
  • Entering total kernels on one ear as the rows. Enter the number of rows and the kernels in one row, not the whole ear.
  • Always using 90,000. It is the usual standard, but compare it with the other values for a stress year or large kernels.
  • Mixing hectares and acres. Use the field size in the unit of the units choice.
  • Counting only the best ears. Average ears from typical spots.

What next

Use this often? Add Corn Yield to your Home screen.

Frequently asked questions

What is a corn yield calculator?

A tool that estimates bushels per acre from a field count of ears, kernel rows per ear and kernels per row, using a chosen number of kernels per bushel.

What is the corn yield formula?

Ears per acre times kernel rows per ear times kernels per row, divided by 90,000 kernels per bushel. With ears counted in 1/1000 acre, divide the three counts multiplied together by 90.

How long is 1/1000 of an acre of row?

Divide 43,560 by the row spacing in feet, then divide by 1,000. At 30 inch rows it is 17 feet 5 inches.

Why is 90,000 kernels per bushel used?

It is the standard figure for a 56 pound bushel, but it is an assumption. Stress years or large kernels may call for another value.

How accurate is the estimate?

North Dakota State says about 20 bushels per acre either way. It is a pre-harvest guide from a small sample, so the combine result may differ.

How many pounds is a bushel of corn?

The pages we read use 56 pounds per bushel.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools