An acres per hour calculator tells you how much ground a machine covers in an hour. Enter the working speed and the width of the implement and it gives the theoretical field capacity. Add a field efficiency and it gives the effective capacity, and with an area it gives the time to finish the job.
How to use the acres per hour calculator
- Choose US or metric units.
- Enter the working speed and the working width, and a field efficiency if you know it.
- Enter the area to find the time, then press Calculate.
The formula
The area covered per hour is the speed times the width. In US units, with the speed in miles per hour and the width in feet, the acres per hour are the speed times the width divided by 8.25. The constant comes from the size of an acre: the Wikipedia article on the acre says that an acre is 43,560 square feet, which is 66 by 660 feet.[1] A mile per hour is 5,280 feet per hour, and 43,560 divided by 5,280 is 8.25. So 6 mph with a 30 foot implement covers 6 × 30 ÷ 8.25 = 21.8 acres an hour. The pages we read do not state this machinery formula, so the derivation is our own working.
Metric units
With the speed in kilometres per hour and the width in metres, the hectares per hour are the speed times the width divided by 10, because 1 kilometre per hour times 1 metre is 1,000 square metres an hour, which is a tenth of a hectare. For 9.656 km/h and 9.144 m, this gives 8.83 hectares an hour. The calculator also converts to the other unit using the page's value of an acre as about 0.4047 hectares, exactly 0.40468564224.[1] The 8.83 hectares per hour are 21.8 acres per hour, which agrees with the US example.
Theoretical and effective capacity
The theoretical capacity assumes that the machine works at full width without a stop. In practice time is lost to turning at the headlands, overlap between passes, filling hoppers and tanks, and adjusting the machine. The effective capacity is the theoretical one multiplied by the field efficiency. At 75 percent, the 21.8 acres an hour become 16.4. This efficiency figure is our own example. The pages we read give no typical efficiencies for any job, so use values from your own records or from a local extension guide.
Time to finish
Enter the area and the calculator divides it by the effective capacity. For 100 acres at 16.36 acres an hour, the time is 6.11 hours, about 6 hours and 7 minutes. Add the time for travel between fields and for any breaks to plan a whole day. If you have several machines working together, add their capacities to find the time for the group.
Working width and overlap
The working width is the width that is actually treated, not just the width of the machine, and it is often a little less than the nominal width because passes overlap. If you overlap each pass by 5 percent, a 30 foot implement works as 28.5 feet. Enter the working width, or allow for the overlap in the field efficiency. This is our own practical advice.
Checking your result
Compare the calculator's effective capacity with what you actually achieved on a recent field: divide the area by the hours that the machine ran. If your real figure is much lower, look for time lost at the headlands, in loading or in waiting. If it is higher, the speed or the width that you entered may be too low. This check helps you find a realistic field efficiency for later jobs.
Examples for common jobs
A mower deck of 6 feet pulled at 5 mph covers 5 × 6 ÷ 8.25 = 3.64 acres an hour at full efficiency, and about 2.9 at 80 percent. A 40 foot sprayer at 12 mph covers 58.2 acres an hour in theory, and at 65 percent efficiency about 37.8. A 12 metre drill at 8 km/h covers 9.6 hectares an hour. These are our own illustrations of the formula, with efficiencies chosen only for the example.
Comparing machines
When you compare two machines, compare their effective capacities, not just the width. A wider implement that is slow to turn or to refill can end up with a lower efficiency, and a narrower one at higher speed can match it. Use the calculator for both, with efficiencies from your own records, and compare the hours needed for the same area.
Seasonal planning
Use the capacity to plan a season. If you must plant 800 acres in a window of 10 working days of 10 hours each, you need 800 ÷ 100 = 8 acres an hour. Compare that with the effective capacity of your planter. If the planter does less, you need a second machine, a wider implement or longer days. Weather days lost make the window smaller, so allow a margin.
Common mistakes
- Mixing units. Use miles per hour with feet, and kilometres per hour with metres.
- Using the nominal width. Overlap reduces the working width.
- Forgetting efficiency. The theoretical figure is an upper limit.
What next
Use this often? Add Acres per Ho to your Home screen.
Frequently asked questions
What is an acres per hour calculator?
A tool that finds how much ground a machine covers in an hour from its working speed and width, and the time to cover an area.
What is the formula for acres per hour?
Acres per hour = speed in mph × width in feet ÷ 8.25. In metric, hectares per hour = speed in km/h × width in metres ÷ 10.
Where does 8.25 come from?
An acre is 43,560 square feet and a mile is 5,280 feet. 43,560 ÷ 5,280 = 8.25.
What is field efficiency?
The share of the theoretical capacity that you achieve after time lost to turns, overlap, refilling and stops.
How long will 100 acres take?
Divide 100 by the effective capacity. At 16.36 acres per hour that is about 6 hours and 7 minutes.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.