A concrete block calculator estimates how many blocks you need for a wall. Enter the length and height of the wall, subtract the area of doors and windows, add an allowance for waste and it gives the number of blocks. The default block is the standard size, and you can enter another size.
How to use the concrete block calculator
- Choose US or metric units.
- Enter the wall length and height, and any openings.
- Add a waste allowance, and change the block size if yours is different.
- Press Calculate.
Standard block sizes
In the United States, concrete blocks are nominally 16 inches long and 8 inches wide, which is 410 by 200 millimetres [1]. Their actual dimensions are 3/8 inch, or 9.5 millimetres, less than the nominal ones, to allow for 3/8-inch mortar joints between the blocks in any orientation [1]. So a block that is nominally 8 by 8 by 16 inches is about 7⅝ by 7⅝ by 15⅝ inches, and with its joint it occupies a space of 16 by 8 inches on the face of the wall.
Other regions
Standards differ around the world. The page gives a block of 440 by 215 by 100 millimetres for Ireland and the United Kingdom, and 390 by 190 by 190 millimetres for Australia, New Zealand and Canada, in both cases excluding the mortar joints [1]. A 390 by 190 block with a 10 millimetre joint occupies 400 by 200 millimetres on the face, which is the default in metric mode, and the 10 millimetre joint is our own assumption. Enter the size of your block, with its joint, to use another.
The calculation
The number of blocks is the net wall area divided by the face area of one block with its joint. For the standard block that area is 16 × 8 = 128 square inches, so a square foot of wall needs 144 ÷ 128 = 1.125 blocks, our own arithmetic. The calculator subtracts the openings from the wall area, divides by the area of one block, adds the waste allowance and rounds up to a whole block.
A worked example
A wall 20 feet long and 8 feet high has an area of 160 square feet, and needs 160 × 1.125 = 180 blocks. With a waste allowance of 5 percent that rises to 189 blocks. If the wall has a door and a window with a total area of 21 square feet, the net area is 139 square feet, which needs 156.4 blocks, or 157 whole blocks without waste. In metric, a wall of 6 by 2.4 metres is 14.4 square metres, which at 0.08 square metres a block takes 180 blocks. These are our own calculations.
Waste allowance
Blocks break in transport, are cut to fit and are lost at openings. An allowance of 5 to 10 percent is common for a simple wall, and more for a wall with many corners or openings. The waste is a judgement for your site and builder, so it is an input and not a built-in value. Enter zero to see the bare count.
What the count leaves out
The result is the number of whole blocks in the face of the wall. Half blocks, corner blocks, lintel and bond beam blocks, and the courses under and above openings add to or change the mix. Mortar, reinforcing steel and grout depend on the design of the wall. The pages that we read give no coverage figures or weights, so the calculator does not estimate them.
Courses and height
Each course is 8 inches, or 200 millimetres, high including the joint, so a wall 8 feet high has 12 courses. To make a wall come out in whole courses, adjust its height or the joint thickness. The calculator treats the height as a plain number and does not round to whole courses, so check your design if the height is critical.
Using the result
Use the number to get quotes and to plan deliveries, and ask your supplier to confirm the quantity for your design. Compare with the block count from your drawings if you have them. If the two differ greatly, check that the units and the block size agree.
Quick estimates by hand
For a quick check, multiply the wall area in square feet by 1.125 for standard blocks. A wall 10 feet by 4 feet has 40 square feet and takes 45 blocks, and a wall of 30 by 6 feet takes 202.5, so about 203. In metric, with a 400 by 200 block, divide the area in square metres by 0.08, which is the same as multiplying by 12.5. Use these shortcuts to see whether a quote is reasonable before you look at the details.
Walls with several faces
For a building with four walls, run the calculator once for each wall, or add the lengths and use the average height. Subtract all the doors and windows. Corners are shared between walls, so a simple sum of the wall lengths slightly overcounts at the corners if you measure to the outside, and the waste allowance covers the difference.
Common mistakes
- Using the nominal size without the joint. The face size includes the mortar joint.
- Forgetting the openings. Subtract doors and windows.
- Mixing feet and inches. Check the units setting.
- Ordering exactly the count. Add an allowance for breakage and cuts.
What next
Use this often? Add Concrete Blo to your Home screen.
Frequently asked questions
What is a concrete block calculator?
A tool that estimates the number of blocks needed for a wall from its area.
How many blocks are in a square foot?
1.125 for a standard 8 by 16 inch face with its mortar joint.
What size is a standard block?
Nominally 16 inches long and 8 inches wide in the United States, with actual dimensions 3/8 inch less to allow for mortar joints.
How much waste should I allow?
Often 5 to 10 percent, depending on the number of cuts and openings.
Does the calculator include mortar?
No. Mortar, steel and grout depend on the design of the wall.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.