Saved

Press the star next to a tool's name to save it.

All my tools

Boiling Point Elevation Calculator

Use this colligative properties calculator to find boiling point elevation, freezing point depression, osmotic pressure and vapour pressure lowering from the molality and the van 't Hoff factor.

Restored your last values ·

Choose the property. For the boiling point and freezing point, pick the solvent and enter the molality and the van 't Hoff factor. For osmotic pressure enter the molar concentration, factor and temperature. For Raoult's law enter the vapour pressure of the pure solvent and the mole fraction.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose a property and fill in the boxes, then press Calculate.

See full result

A colligative properties calculator works out how a dissolved substance changes the properties of a solvent: it raises the boiling point, lowers the freezing point, creates an osmotic pressure and lowers the vapour pressure. These properties depend on the number of dissolved particles and not on what they are. Choose a property, pick the solvent and enter the concentration.

How to use the colligative properties calculator

  1. Choose the property you want.
  2. Pick the solvent and enter the molality and the van 't Hoff factor, or the other values that the boxes ask for.
  3. Press Calculate.

What colligative means

The page on colligative properties explains that they depend on the ratio of solute particles to solvent particles and not on the kind of particle [1]. They hold only in the dilute limit [1]. The van 't Hoff factor, i, is the true number of particles for each formula unit of solute [1]. Sugar has a factor of 1, sodium chloride is about 1.9, often simplified to 2, and calcium chloride is about 2.3, often simplified to 3 [2].

Boiling point elevation

The boiling point rises by ΔTb = i × Kb × m, where Kb is the boiling point constant of the solvent and m is the molality [1]. The page lists constants in °C kg/mol: water 0.512, acetic acid 3.07, benzene 2.53, carbon disulfide 2.37, carbon tetrachloride 4.95, naphthalene 5.8 and phenol 3.04 [2]. One mole per kilogram of sodium chloride in water, with a factor of 2, raises the boiling point by 1.024 °C to 101.024 °C. The formula loses precision at high concentration and does not hold for volatile solutes [2].

Freezing point depression

The freezing point falls by ΔTf = i × Kf × m [3]. The page tabulates Kf for water as 1.86, acetic acid 3.90, benzene 5.12, camphor 39.7, carbon disulfide 3.8, carbon tetrachloride 30, chloroform 4.68, cyclohexane 20.2, ethanol 1.99, ethyl ether 1.79, naphthalene 6.9 and phenol 7.27 [3]. The same salt solution lowers the freezing point of water by 3.72 °C, so it freezes at minus 3.72 °C, which is why salt melts ice. Half a mole per kilogram of a non-electrolyte in benzene lowers the freezing point by 2.56 °C.

Osmotic pressure

Osmotic pressure is Π = i × c × R × T, where c is the molar concentration and T the absolute temperature [4]. The page treats it as an approximation for ideal, low-concentration solutions [4]. Using R = 8.314 J/(mol K) from the page on colligative properties [1], a 1 mol/L solution of sodium chloride with a factor of 2 at 25 °C has an osmotic pressure of about 4,958 kilopascals, which is 4.96 megapascals or 48.9 atmospheres. This is our own calculation.

Raoult's law

Raoult's law says that the partial vapour pressure of a component is its pure vapour pressure times its mole fraction, p = p* × x [5]. For a non-volatile solute, the vapour pressure of the solution is the pure solvent's pressure times the mole fraction of the solvent, and the lowering is the pure pressure times the mole fraction of the solute [5]. Water at 25 °C has a vapour pressure of about 23.76 mmHg, and a solution in which water has a mole fraction of 0.98 has a vapour pressure of 23.28 mmHg, a lowering of 0.475.

Where the constants come from

The constants Kb and Kf come from the properties of the solvent: they equal R M T² divided by the heat of vaporization or of fusion, where M is the molar mass of the solvent and T its normal boiling or freezing point [1]. They are the same for any solute. The calculator uses the tabulated values and the normal boiling and freezing points that go with them, and lets you enter your own constant for another solvent.

Worked examples

Adding 10 percent of salt to the roads lowers the freezing point of water by far more than a sugar solution would. A solution of 0.5 mol/kg of a non-electrolyte in water raises the boiling point by 0.256 °C and lowers the freezing point by 0.93 °C. These are our own calculations.

Everyday examples

Colligative properties explain many everyday effects. Salt on an icy road lowers the freezing point of water, so ice melts at temperatures below zero. Antifreeze in a car engine lowers the freezing point of the coolant and raises its boiling point. Salt in cooking water raises the boiling point slightly, though a pinch changes it by far less than a degree. Osmotic pressure explains why drinking seawater dehydrates the body and why plant roots draw in water.

Using the calculator

For the boiling and freezing points, you need the molality, the moles of solute per kilogram of solvent. If you know the mass of solute and of solvent, divide the moles by the kilograms of solvent. For osmotic pressure you need the molarity, the moles per litre of solution. For vapour pressure lowering you need the mole fraction of the solvent, which is the moles of solvent over the total moles. Use the concentration page to convert between these units.

Common mistakes

  • Forgetting the van 't Hoff factor. Salts give more particles than sugar.
  • Using molarity for the boiling point. The formula needs molality.
  • Using the wrong solvent constant. Kb and Kf are different for each solvent.
  • Applying the formulas to strong solutions. They hold in the dilute limit.

What next

Use this often? Add Boiling Poin to your Home screen.

Frequently asked questions

What is a colligative properties calculator?

A tool that finds how a dissolved substance changes the boiling point, freezing point, osmotic pressure and vapour pressure of a solvent.

What is the boiling point elevation formula?

ΔTb = i × Kb × m. For water, Kb is 0.512 °C kg/mol, so 1 mol/kg of NaCl with i = 2 raises the boiling point by 1.024 °C.

What is the freezing point depression formula?

ΔTf = i × Kf × m. For water, Kf is 1.86, so the same solution freezes at −3.72 °C.

What is the van 't Hoff factor?

The number of particles that one formula unit of solute makes in solution. It is 1 for sugar and about 2 for sodium chloride.

What is the osmotic pressure formula?

Π = i × c × R × T, where c is the molar concentration and T is in kelvins.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools