Saved

Press the star next to a tool's name to save it.

All my tools

Brake Specific Fuel Consumption Calculator

Use this brake specific fuel consumption calculator to find BSFC in g/kWh and lb/hp·h from fuel flow and power, with the thermal efficiency for gasoline or diesel.

Restored your last values ·

Enter the fuel an engine burns each hour and the power it produces at that moment. Both must be measured at the same load and speed.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter a value and press Calculate.

See full result

A brake specific fuel consumption calculator shows how efficiently an engine turns fuel into power. Enter the fuel flow and the engine power measured at the same moment, and the calculator gives the BSFC in grams per kilowatt-hour and pounds per horsepower-hour, plus the thermal efficiency for gasoline or diesel.

What is BSFC?

According to Wikipedia, brake-specific fuel consumption is the rate of fuel consumption divided by the power produced. In traditional units it is fuel burned in pounds per hour divided by the brake horsepower, written lb/(hp·h). Commonly it is expressed in grams per kilowatt-hour, g/(kW·h). A lower number means the engine uses less fuel for the same power, so it is more efficient. The word brake refers to the power measured at the output shaft by a brake or dynamometer.

The BSFC formulas

BSFC = fuel flow ÷ power
BSFC (g/kWh) = BSFC (lb/hp·h) × 608.277
Efficiency = 1 ÷ (BSFC in g/kWh × heating value in kWh/g)

Wikipedia gives the conversion factor 608.277 between lb/(hp·h) and g/(kW·h), and the lower heating values of 0.0122222 kWh per gram for regular gasoline and 0.0119531 kWh per gram for diesel. The calculator uses these figures for the efficiency estimate.

How to use the brake specific fuel consumption calculator

  1. Enter the fuel flow and choose lb/h, kg/h or g/s.
  2. Enter the engine power and choose horsepower or kilowatts.
  3. Choose the fuel: gasoline or diesel, for the efficiency figure.
  4. Press Calculate to see BSFC in both units, the efficiency and the flow in kg/h.

Worked example

An engine burns 50 lb of gasoline an hour while making 100 hp. The BSFC is 50 ÷ 100 = 0.5 lb/hp·h. Multiplying by 608.277 gives 304.1 g/kWh. The thermal efficiency is 1 ÷ (304.1 × 0.0122222) = 0.269, which is about 26.9 percent.

Typical values

Wikipedia states that the cycle average BSFC for a gasoline engine is 322 g/kWh, which translates to an efficiency of 25 percent, while the most efficient point for a gasoline engine is about 225 g/kWh, or 36 percent. Across engine classes the range goes from under 200 g/kWh for a diesel at low speed and high torque to more than 1,000 g/kWh for a turboprop at low power. Examples in the article's table include 225 g/kWh for the Toyota 1NZ-FXE gasoline engine and 198 g/kWh for the Audi 2.5 TDI diesel. Use these as a guide for what to expect when you compare your own result.

Why BSFC varies

An engine does not have one BSFC. It is lowest in a sweet spot of speed and load, and higher when the engine idles, runs at light load or is pushed at full power. Manufacturers draw this as an island chart. When you measure your own engine, note the speed and load at which you took the figures, and compare only like with like.

Using BSFC to size fuel injectors

BSFC is also used to estimate the fuel an engine needs at a given power, which in turn determines the size of the injectors. For power units, the power converter may help.

How the brake specific fuel consumption calculator works

The calculator first converts your fuel flow to grams per hour and your power to kilowatts. It divides one by the other to get grams per kilowatt-hour, then divides by 608.277 to give pounds per horsepower-hour. For the efficiency it multiplies the BSFC in g/kWh by the lower heating value of the fuel in kWh per gram and takes the reciprocal. A horsepower is taken as 745.7 watts, the imperial definition.

Measuring fuel flow and power

On a test stand, power is measured by a dynamometer that loads the engine, and fuel flow is measured by a flow meter or by weighing the fuel tank over time. Both must be taken at the same steady speed and load. If you only have the fuel used over a period, divide by the hours to get the flow. If you measure the fuel by volume in litres, convert it to kilograms using the fuel's density before you enter it, because the calculator needs a mass flow.

Reading the efficiency figure

The efficiency shown is the share of the fuel's energy that becomes shaft power. A figure of 27 percent means that roughly three quarters of the fuel's energy leaves as heat, in the exhaust and the cooling system. Wikipedia reports about 25 percent for the cycle average of a gasoline engine and 36 percent at the best point, and about 40.6 percent for a diesel at its sweet spot. Your result can be compared with these to judge whether the engine is operating well.

Comparing engines

BSFC lets you compare engines of different sizes fairly, since it is a ratio. A small engine and a large engine can have the same BSFC even though one burns far more fuel in total. It also lets you compare fuels and technologies: Wikipedia's table shows 198 g/kWh for two modern diesels and 225 to 250 g/kWh for modern gasoline engines. When two engines make the same power, the one with the lower BSFC will use less fuel.

Common mistakes

  • Measuring fuel and power at different loads. They must match.
  • Using the wrong fuel. Gasoline and diesel have different heating values.
  • Confusing crank and wheel power. BSFC is based on the power at the shaft.
  • Mixing units. Check that you chose lb/h or kg/h, and hp or kW, correctly.

What next

Use this often? Add Brake Specif to your Home screen.

Frequently asked questions

How does a brake specific fuel consumption calculator work?

It divides the fuel flow by the engine power. For 50 lb/h and 100 hp the BSFC is 0.5 lb/hp·h, or about 304 g/kWh.

What is brake-specific fuel consumption?

Wikipedia defines it as the rate of fuel consumption divided by the power produced. Lower values mean a more efficient engine.

How do you convert lb/hp·h to g/kWh?

Multiply by 608.277, the factor given on Wikipedia. For example, 0.5 lb/hp·h is about 304.1 g/kWh.

What is a typical BSFC for a gasoline engine?

Wikipedia gives a cycle average of 322 g/kWh, about 25 percent efficiency, with the best point around 225 g/kWh.

How is efficiency worked out from BSFC?

Efficiency is 1 divided by BSFC times the fuel's lower heating value, which is 0.0122222 kWh/g for regular gasoline and 0.0119531 kWh/g for diesel.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools