Saved

Press the star next to a tool's name to save it.

All my tools

Board and Batten Calculator

Use this board and batten calculator to work out how many boards and battens you need for a wall, and the total batten length, for board-and-batten siding.

Restored your last values ·

Use the boards' actual face width. For sheet siding, the battens run from one edge of the wall to the other at the spacing you choose.

Everything is worked out in your browser. Nothing you type is sent anywhere.

Battens needed

–

Enter the wall size and board width or spacing, then press Calculate.

See full result

This board and batten calculator works out how many boards and battens you need to cover a wall with board-and-batten siding. Enter the wall's width and height and either your board width or your batten spacing, and the board and batten calculator gives the number of battens, the number of boards and the total length of batten to buy.

How to use the board and batten calculator

  1. Choose US or metric units. US (feet and inches) is the default.
  2. Choose the layout: wide boards with a batten over each seam, or sheet siding with battens at a set spacing.
  3. Enter the wall width and height.
  4. Enter the board width or the batten spacing, then press Calculate.

What is board and batten?

According to Wikipedia, board-and-batten siding is an exterior treatment of vertical boards with battens covering the seams. A batten is a thin strip of wood, and in this style each one hides the joint between two wide boards. The same idea is used for board-and-batten roofs, where battens cover the gaps between roof boards, and on interior walls, where battens are fixed over panels for a decorative look. Today, many board-and-batten walls are made with large sheets of siding and battens fixed at a regular spacing, rather than separate boards.

How the calculator works

Boards with battens over the seams: the calculator divides the wall width by the board width and rounds up to get the number of boards. There's one seam between each pair of boards, so the number of battens is one less than the number of boards. Tick the box to add a batten at each end of the wall as well.

Sheet siding with battens at a spacing: the calculator divides the wall width by the spacing, rounds down and adds one, so there's a batten at the start of the wall and then one at every spacing interval.

In both layouts, the total batten length is the number of battens times the wall height.

Worked example

Take a wall 20 feet wide and 8 feet high, covered with boards 11¼ inches wide. The wall is 240 inches, and 240 ÷ 11.25 = 21.3, so you need 22 boards. With 21 seams between them, you need 21 battens, or 168 feet of batten. With sheet siding and battens every 16 inches, the same wall needs 240 ÷ 16 = 15, plus 1, or 16 battens, 128 feet in all.

Reading the results

The big number is the number of battens. The table shows the number of boards (for the boards layout) and the total length of batten. Battens are usually sold in set lengths, so divide the total length by the length you can buy, or simply buy one batten per row if your battens are at least as long as the wall is high.

Choosing a spacing

The spacing changes the look of the wall. Closer battens give a busier, more traditional look, while wider spacing looks cleaner and more modern. Whatever spacing you choose, it helps to line the battens up with the framing behind the wall so they can be fixed securely, and to plan the layout so the gaps at each end of the wall are even. Try a few spacings in the calculator to compare how many battens each needs.

Allowing for openings and waste

The calculator treats the wall as a plain rectangle. Windows and doors reduce the length of some battens but rarely the number, since battens usually run above and below openings. Gables and sloped walls need shorter battens toward the peak. It's sensible to add a margin for waste, cutting mistakes and damaged pieces.

Gaps at the ends of the wall

When boards don't divide evenly into the wall, the last board needs ripping to width. In the worked example, 22 boards of 11¼ inches cover 247.5 inches, so 7.5 inches has to come off. Splitting that between the two end boards keeps the layout balanced, with a full-width board in the middle. With battens at a set spacing, the leftover space at the far end is the wall width minus the spacing times the number of gaps; for the 16-inch example, 240 ÷ 16 is exactly 15, so the last batten lands right at the end of the wall.

Board and batten on interior walls

The same calculation works for an interior feature wall made of panels with battens fixed over them. Enter the width of the wall and the spacing you want between batten centers. For a grid pattern with horizontal rails as well, run the calculator a second time using the wall height as the width to count the horizontal pieces.

Common mistakes

  • Using nominal board sizes. Measure the actual face width.
  • Forgetting the ends. Decide whether the corners get their own batten or trim.
  • Ignoring the framing. Line battens up with studs where you can.
  • Buying the exact amount. Add extra for waste.

Tips

  • Mark the batten positions on the wall before you start.
  • Keep the gaps at each end of the wall the same.
  • Prime and paint cut ends to protect them from moisture.

What next

Use this often? Add Board and Ba to your Home screen.

Frequently asked questions

How does a board and batten calculator work?

It divides the wall width by the board width or batten spacing to count boards and battens, then multiplies by the height for total batten length.

How many battens do I need for a 20-foot wall?

With battens every 16 inches, about 16; with 11¼-inch boards and a batten over each seam, 21.

What is board and batten siding?

Vertical boards with narrow battens covering the seams between them.

What spacing should board and batten be?

It's a design choice; line the battens up with the framing and keep the end gaps even.

Should I add extra for waste?

Yes. Add a margin for cuts, mistakes and damaged pieces.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools