Saved

Press the star next to a tool's name to save it.

All my tools

Bernoulli Equation Calculator

Use this Bernoulli equation calculator to find the pressure or the speed at a second point in a steady, frictionless flow from the pressure, speed and height at the first point.

Restored your last values ·

Choose US or metric units and what to find. Enter the pressure, speed and height at the first point and the known values at the second. You get the pressure or the speed at the second point.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the values for point 1 and the known values at point 2, then press Calculate.

See full result

A Bernoulli equation calculator finds the pressure or the speed at a second point of a flowing fluid from the values at a first point. It uses the energy balance of the Bernoulli equation for steady, frictionless, incompressible flow, and it works in US or metric units for water or any fluid density.

How to use the Bernoulli equation calculator

  1. Choose US or metric units and what to find.
  2. Enter the pressure, speed and height at point 1.
  3. Enter what you know at point 2.
  4. Press Calculate.

The equation

For a steady, incompressible, frictionless flow along a streamline, ½ρv² + ρgz + p is constant [1]. Here ρ is the density, v the speed, g the acceleration of gravity, z the height and p the static pressure. The three terms are the kinetic energy, the potential energy and the pressure energy per unit volume. The sum has the same value at every point of the streamline.

Pressure at point 2

The calculator uses p₂ = p₁ + ½ρ (v₁² − v₂²) + ρ g (h₁ − h₂). For water, with a density of 1,000 kilograms per cubic metre, a pressure of 200 kilopascals at 2 metres per second, flowing at the same height into a narrower section where it moves at 6 metres per second, the pressure falls to 184 kilopascals. The density of water and the value of g, 9.80665 metres per second squared, are our own figures.

Speed at point 2

The same equation can be solved for the speed: v₂² = v₁² + 2 (p₁ − p₂) ÷ ρ + 2 g (h₁ − h₂). With the pressures of 200 and 184 kilopascals at the same height, and a speed of 2 metres per second at the first point, the speed at the second is 6 metres per second. If the result under the root would be negative, the calculator says so, since the speed would not be real.

The Venturi effect

The page describes the Venturi meter. The pressure upstream, where the pipe is wide, is higher than at the constriction, where the speed is higher [1]. The kinetic energy of the fluid rises at the expense of its pressure. This is what the calculator shows in the first example. The measured pressure drop in a Venturi can therefore be used to find the speed of the flow.

Height

A fluid that goes down a pipe gains pressure from the fall. With no change of speed, water at 100 kilopascals that falls 10 metres has a pressure of 198.07 kilopascals, since ρ g h is 98.07 kilopascals. The calculator takes the heights of the two points, in feet or metres, and adds the difference. Leave them blank for a horizontal pipe.

Total pressure and head

The page also gives the dynamic pressure q = ½ρv², and writes the total pressure as p + q when the height term is negligible, as for an aircraft in flight [1]. The head forms, dividing by ρ g, give the equation in lengths: the pressure head, the velocity head and the elevation head. The calculator gives pressure or speed, which are the commonest needs.

Units

In US mode, pressure is in psi, speed in feet per second, height in feet and density in pounds per cubic foot. The calculator converts these to SI units, using 6,894.757 pascals per psi, 0.3048 metres per foot and 16.018 kilograms per cubic metre for one pound per cubic foot, which are our own conversion factors. A blank density means water.

When it does not apply

The page lists the conditions: the flow is steady, the density is constant along the streamline, and viscous friction is negligible [1]. It does not apply in boundary layers, as in the flow through long pipes [1], where friction removes pressure, or for gases at speeds near that of sound. For long pipes, add a friction loss term, which this calculator leaves out.

Using the calculator

Pick the mode and the units, enter the values at point 1, and the known values at point 2. Use the working line to see the equation that was solved. Try a narrow section to see the pressure fall, a fall in height to see it rise, and the same pressure at both points to see the speed that results from a change of height alone.

A US example

Water at 30 psi flows at 6.5 feet per second into a narrower section where it flows at 20 feet per second, at the same height. The calculator converts the speeds to 1.981 and 6.096 metres per second, finds a pressure drop of 16,618 pascals, which is 2.41 psi, and gives 27.68 psi at the second point. These figures are our own calculation. The same result in metric units would use 206.8 kilopascals at the first point.

Gauge or absolute

The equation only needs the difference in pressure between the two points, so you can use gauge pressures at both, or absolute pressures at both. What you cannot do is mix them. If you need to know whether the pressure at the narrow section falls below the vapour pressure of the liquid, where cavitation begins [1], use absolute pressure in the calculator.

Common mistakes

  • Applying it to long pipes with friction. Add a loss term.
  • Mixing gauge and absolute pressure. Use one kind.
  • Forgetting the height. It adds a pressure term.
  • Using a compressible gas near Mach 1. The equation fails.

What next

Use this often? Add Bernoulli Eq to your Home screen.

Frequently asked questions

What is a Bernoulli equation calculator?

A tool that finds the pressure or the speed at a point in a flowing fluid from the values at another point.

What is the Bernoulli equation?

½ρv² + ρgz + p = constant along a streamline.

What are the assumptions?

Steady, incompressible flow with negligible viscous friction.

Why does the pressure fall in a narrow section?

The speed rises, and the kinetic energy comes at the expense of the pressure.

Can I use it for a long pipe?

Not without a friction loss term, since the equation ignores viscosity.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools