A bean bag filling calculator tells you how much filler to buy to fill a bean bag. Enter the length, width and height of the bag, and the calculator gives the weight of filler in kilograms, and the number of 1 kg packs. It uses a simple box-volume method with an assumed filler density. It runs in your browser and nothing you enter is sent anywhere.
How to use the bean bag filling calculator
- Choose US or Metric units.
- Enter the length, width and height of the bean bag.
- If your filler comes in packs that do not weigh 1 kg, enter the pack weight.
- Press Find filler needed.
The formulas
We treat the bean bag as a box, which is our own working. The volume is the length times the width times the height. The weight of filler is the volume in cubic metres times 20 kilograms per cubic metre, an assumed density that sits inside the normal 11 to 32 kilograms per cubic metre range of expanded polystyrene foam.[2] The number of packs is the weight divided by the weight of one pack, which we take as 1 kilogram. Written together, the filler needed is length times width times height times 20 kilograms per cubic metre, with the sizes in metres.
Worked examples
Our example is a bean bag 70 centimetres long, 60 wide and 50 high. The volume is 210,000 cubic centimetres, which is 0.21 cubic metres. Multiplying by 20 gives 4.2 kilograms. That is 4.2 packs, or four packs and a fifth of a pack. Four packs would give a slightly loose bean bag, and most people like a well-packed one, so we suggest buying five. This calculator therefore shows the exact number of packs, 4.2, and the number to buy, which is rounded up to 5. A bag that is 50 centimetres in every direction has a volume of 0.125 cubic metres and needs 2.5 kilograms, which means three packs.
US units
If you choose US units, enter the sizes in inches. The calculator changes them into centimetres and then into cubic metres, so that the same formula applies. It shows the weight in kilograms and in pounds. A bag 28 inches long, 24 wide and 20 high holds about 0.22 cubic metres, which needs about 4.4 kilograms, or 9.7 pounds, of filler.
What bean bag filler is
The original 1968 bean bag chair was filled with expanded polystyrene beads.[1] Fillers come in packs, and we use 1-kilogram packs for our example. If your packs are a different size, enter the weight of one pack, and the calculator will count the packs for you. Look at the label too: some fillers are sold by volume in litres rather than by weight, and the weight of a litre depends on the beads.
How full should the bag be?
The calculator applies no fill ratio, and the result is the filler for a bag that is completely full. A bag for lounging is usually filled only partly, so that it moulds to your body, while a firm pouffe is filled fully. If you want a softer bag, buy one pack fewer, since a slightly loose bag is a matter of taste. You can always add filler later, but you cannot take it out easily.
Reading the result
The calculator shows the total weight of filler, the exact number of packs, the number of packs to buy and the volume of the bag. The exact figure shows how much of the last pack you would use, and the rounded figure is the number to put in your basket. In US units, it also shows the weight in pounds, so you can compare it with a pack that is labelled in pounds. The volume is in cubic metres, which is the unit the density uses.
Measuring the bean bag
Lay the empty cover flat on a table and measure its length and width, and then estimate the height from the shape you want when the bag is full. A bean bag cover is not a box, so the result is only an approximation of the filler needed. For a round bag, use the diameter as both the length and the width, and the height of the filled bag. For a pear-shaped bag, measure the widest and tallest points. The box is always bigger than the bag, so rounding up to whole packs is a sensible habit.
Refilling an old bag
Bean bags lose volume as the beads compress and break down. To refill an old bag, you do not need the full amount of filler. Measure how far the bag has sunk, or compare it with a new one of the same size, and top it up by the difference. Calculate the full amount with this tool, and then buy the number of packs that matches the gap. Work in a room without a draught, and use a funnel, as loose beads spread and are hard to clean up.
Common mistakes
- Measuring the cover loosely. Measure the flat bag and use its real size.
- Mixing units. Choose US or Metric before you enter the sizes.
- Not rounding up. Round up to whole packs.
- Using a different density. The 20 kg per cubic metre is our assumed density, so check the label of your filler.
What next
Use this often? Add Bean Bag Fil to your Home screen.
Frequently asked questions
What is a bean bag filling calculator?
A tool that works out how much filler a bean bag needs from its length, width and height.
How much filler does a bean bag need?
Volume in cubic metres times an assumed 20 kg per cubic metre. A 70 by 60 by 50 cm bag needs 4.2 kg.
How many packs should I buy?
Round up. Four 1 kg packs give a slightly loose bag in the 4.2 kg example, so we suggest five.
What is bean bag filler made of?
Usually expanded polystyrene beads.
Does it work in inches?
Yes. Choose US units, enter inches, and the calculator shows the weight in kilograms and pounds.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.