Saved

Press the star next to a tool's name to save it.

All my tools

Asphalt Calculator

Enter the length, width and thickness of the area you want to pave. The asphalt calculator works out the volume and how many tons of compacted hot-mix asphalt to order, with an optional waste allowance and cost.

Restored your last values ·

If you leave density blank, the calculator uses compacted hot-mix asphalt at 145 lb per cubic foot (2,323 kg per cubic meter).

Asphalt needed

–

Enter the size and thickness of the area.

See full result

The asphalt calculator tells you how many tons of hot-mix asphalt you need to pave a driveway, path or parking area. Enter the length and width of the area in feet and the compacted thickness in inches, and it works out the volume, multiplies it by the weight of compacted asphalt and converts the result to US tons. Add a waste allowance and the price per ton from your supplier to see the cost too. For example, a 40 × 12 ft driveway paved 3 inches thick needs about 8.7 tons of asphalt.

The asphalt tonnage formula

Asphalt is sold by weight, but you measure the job by size, so the calculator converts one into the other:

  1. Volume (cubic feet) = length (ft) × width (ft) × thickness (in) ÷ 12
  2. Weight (lb) = volume × density
  3. Tons = weight ÷ 2,000

The density of compacted hot-mix asphalt is usually taken as about 145 pounds per cubic foot. Vulcan Materials, one of the largest US suppliers, uses 145 lb per cubic foot as the standard value in its own asphalt calculator and notes that actual densities vary by mix design. If your supplier gives you a different figure, type it in the density box.

How to use the asphalt calculator

  1. Choose US or metric units. US uses feet and inches; metric uses meters and centimeters and gives the answer in metric tons.
  2. Enter the length and width of the area. For an L-shaped or irregular driveway, split it into rectangles, work each one out and add the tons together.
  3. Enter the compacted thickness. This is the finished depth after rolling, not the loose depth.
  4. Leave density blank to use 145 lb per cubic foot (2,323 kg per cubic meter), or enter your supplier’s figure.
  5. Add a waste allowance if you want extra for uneven ground and edges, and a price per ton to see the cost.

Worked example: a two-car driveway

A driveway 40 feet long and 12 feet wide, paved 3 inches thick:

  • Area: 40 × 12 = 480 sq ft
  • Volume: 480 × 3 ÷ 12 = 120 cubic feet, or about 4.44 cubic yards
  • Weight: 120 × 145 = 17,400 lb
  • Tons: 17,400 ÷ 2,000 = 8.7 tons

With a 5% waste allowance, the order becomes 9.14 tons. If your supplier charges $100 a ton, the material for the 8.7 tons costs $870 before delivery and labor. In metric units, a 12 × 3.6 m driveway paved 7.5 cm thick is 3.24 cubic meters, which weighs about 7.53 metric tons at 2,323 kg per cubic meter.

How thick should asphalt be?

Thickness has the biggest effect on how much asphalt you need. Doubling the thickness doubles the tons. Residential driveways and paths are usually paved in one or two layers a few inches thick over a compacted gravel base, while parking lots and roads that carry heavy trucks need thicker pavement. The right thickness depends on the traffic, the soil and the base, so follow your contractor’s or local code’s specification and enter that figure here. Remember that the base layer of crushed stone is a separate material, which you can estimate with the gravel calculator.

Tons, cubic yards and loads

Plants sell hot-mix asphalt by the ton, so the tons figure is what you order. The calculator also shows cubic feet and cubic yards, which help when you compare the job with a concrete pour or a delivery truck’s capacity. Because asphalt cools quickly and must be laid hot, it is usually delivered in one go on the day of paving, so it pays to order the right amount: too little leaves a cold joint, and too much is wasted.

Why add a waste allowance?

Real driveways are rarely perfect rectangles. Uneven subgrade, low spots, thickened edges and material left in the truck or spreader all use extra asphalt. Many estimators add a few percent to the calculated tons to cover this. Enter the percentage you want in the waste box and the calculator adds it to the weight and cost; leave it blank for the exact calculated amount.

Common mistakes

  • Using loose depth instead of compacted depth. Asphalt is rolled down after it’s spread, so always enter the finished thickness.
  • Mixing units. Length and width are in feet but thickness is in inches; the calculator divides by 12 for you.
  • Confusing US tons and metric tons. A US (short) ton is 2,000 lb; a metric ton is 1,000 kg, about 2,205 lb.
  • Forgetting the base. The tons here cover only the asphalt layer, not the stone base underneath.

Asphalt or concrete?

If you’re still choosing a material, compare the cost of a concrete slab with the concrete calculator. Asphalt is usually cheaper to lay and quicker to use, while concrete lasts longer but costs more up front. For the area of an odd-shaped plot, the square footage calculator can help you measure first.

Measuring the area

Measure along the edges of the area to be paved with a long tape or a measuring wheel, and round up to the next foot. For a driveway that widens at the street, measure the main rectangle and the flared apron separately; a triangle’s area is half its base times its height. Add any turnaround or parking pad as its own rectangle. Small errors add up: an extra foot of width on a 40 ft driveway adds 40 sq ft, or about 0.7 tons at 3 inches thick.

The result is an estimate for planning and ordering. Your supplier or paving contractor can confirm the mix, density and quantity for your job.

What next

Use this often? Add Asphalt to your Home screen.

Frequently asked questions

How does the asphalt calculator work out tons?

It multiplies length by width by thickness to get cubic feet, multiplies by the density of compacted asphalt (145 lb per cubic foot unless you change it) and divides by 2,000 to get US tons.

How many tons of asphalt do I need for a 40 × 12 driveway?

At 3 inches thick, about 8.7 tons. At 2 inches it’s 5.8 tons, and at 4 inches 11.6 tons.

How much does a cubic yard of asphalt weigh?

At 145 lb per cubic foot, a cubic yard (27 cubic feet) weighs about 3,915 lb, or just under 2 US tons.

Should I add extra asphalt for waste?

Many estimators add a few percent for uneven ground, edges and material left in the equipment. Enter it in the waste box.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools