Saved

Press the star next to a tool's name to save it.

All my tools

Arrhenius Equation Calculator

Use this Arrhenius equation calculator to find a rate constant, the activation energy from two temperatures, the rate at a new temperature, and Q10.

Restored your last values ·

Choose a job. Enter A, the activation energy and the temperature to get a rate constant. Or enter rate constants at two temperatures to get the activation energy, or enter a rate constant at one temperature to find it at another. The Q10 modes use rates at two temperatures.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what you want and fill in the boxes, then press Calculate.

See full result

The Arrhenius equation calculator finds a rate constant from the pre-exponential factor, the activation energy and the temperature, finds the activation energy from rate constants at two temperatures, and predicts the rate constant at a new temperature. It also works with Q10, the factor by which a rate rises for a 10 degree increase.

How to use the Arrhenius equation calculator

  1. Choose what you want.
  2. Enter the values that the boxes ask for. Temperatures are in degrees Celsius and the activation energy is in kilojoules per mole.
  3. Press Calculate.

The equation

The page on the Arrhenius equation gives k = A exp(−Ea/RT), where k is the rate constant, A is the pre-exponential factor, Ea is the activation energy, R is the gas constant and T is the absolute temperature [1]. The logarithmic form is ln k = ln A − (Ea/R)(1/T) [1]. The activation energy is usually given in kilojoules per mole or kilocalories per mole [2], and A has the same units as k [1]. The calculator uses R = 8.3144598 joules per mole per kelvin, the value on the page about the gas laws [4].

Two temperatures

Write the logarithmic form for two temperatures and subtract, and A cancels. The result is ln(k2/k1) = −(Ea/R)(1/T2 − 1/T1), which is our own algebra from the form on the page. Solving for the activation energy gives Ea = −R ln(k2/k1) divided by (1/T2 − 1/T1). If a rate constant doubles from 25 °C to 35 °C, the activation energy is 52.9 kilojoules per mole. Enter the temperatures in Celsius and the calculator adds 273.15.

A new temperature

With the activation energy known, the rate constant at a second temperature is k2 = k1 times e to the power minus (Ea/R)(1/T2 − 1/T1). With Ea = 52.9 kilojoules per mole, a rate constant of 1 at 25 °C becomes 2 at 35 °C. The page gives a rule of thumb that the rate rises about two to three times for each 10 °C [2]. The calculator shows the ratio of the two rate constants.

Q10

Q10 is a unitless factor for the change in a rate over 10 °C. It is (R2/R1) raised to the power of 10 °C divided by (T2 − T1), and the rate at a new temperature is R1 times Q10 to the power (T2 − T1) over 10 °C [3]. Typical biological values are about 2 to 3 [3]. If a rate goes from 1 to 2 over 10 °C, Q10 is 2, and if it triples over 20 °C, Q10 is 1.73. With a Q10 of 2, a rate of 1 at 10 °C becomes 4 at 30 °C. The Q10 page asks for more citations, so treat it as a rough guide.

Units of the rate constant

The units of k depend on the order of the reaction. The page on the rate constant gives per second for a first order reaction, litres per mole per second for second order and moles per litre per second for zero order [2]. The calculator copies the units of the A or k that you enter.

Worked example

A reaction with A = 1 × 10¹³ per second and an activation energy of 75 kilojoules per mole has a rate constant of about 0.72 per second at 25 °C, because e to the power minus 75,000 divided by 8.3144598 times 298.15 is about 7.2 × 10⁻¹⁴. This is our own calculation. Raise the temperature to 35 °C and the rate constant rises to about 2.3 per second.

Limits

The Arrhenius equation works well over a modest temperature range. Over a wide range the plot of ln k against 1/T can curve, and enzymes denature at high temperature, so Q10 fails there. Check that your two temperatures are close enough for the model.

Why temperature matters

For molecules to react they must collide with enough energy to get over a barrier, which is the activation energy. At a higher temperature a larger share of collisions has that energy, so the rate rises steeply. A reaction with a high activation energy is more sensitive to temperature than one with a low value. This is why food spoils faster in a warm kitchen and why cooling slows many reactions.

Using the results

You can find the activation energy from an experiment by measuring the rate constant at two or more temperatures, then use the value to predict the rate at a temperature that you have not tested. With more than two temperatures, plot ln k against 1/T, which should give a straight line whose slope is minus Ea over R, and compare the slope with the answer from two points. Use the Q10 mode when you have only rates and no model of the reaction.

Checking your answer

Test the calculator with a simple case. If the temperature does not change, the rate constant should not change. If the activation energy is zero, the rate constant equals A at every temperature. If you raise the temperature, a reaction with a positive activation energy must get faster, so k2 must be greater than k1. These checks catch swapped temperatures and wrong signs.

Common mistakes

  • Using Celsius in the formula. The temperature must be in kelvins. The calculator converts for you.
  • Entering Ea in joules. Use kilojoules per mole.
  • Swapping k1 and k2. Keep each rate constant with its own temperature.
  • Using Q10 over a wide range. It is a local rule of thumb.

What next

Use this often? Add Arrhenius Eq to your Home screen.

Frequently asked questions

What is an Arrhenius equation calculator?

A tool that uses k = A e^(−Ea/RT) to find a rate constant, the activation energy or the rate at a new temperature.

How do I find the activation energy from two rate constants?

Ea = −R ln(k2/k1) ÷ (1/T2 − 1/T1), with the temperatures in kelvins. A doubling from 25 °C to 35 °C gives about 52.9 kJ/mol.

What is Q10?

The factor by which a rate rises for a 10 °C increase, (R2/R1)^(10/(T2−T1)). Typical biological values are about 2 to 3.

What units does the activation energy have?

Kilojoules per mole or kilocalories per mole. The calculator uses kilojoules per mole.

What value of R does it use?

8.3144598 J/(mol·K).

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools