Saved

Press the star next to a tool's name to save it.

All my tools

Half-Life Calculator

This half-life calculator finds the amount remaining, starting amount, elapsed time or half-life from the other three values, with the decay constant and mean lifetime.

Restored your last values ·

Enter any three values to find the fourth. The amounts can be in any unit (grams, atoms, mg/L), as long as both use the same one, and the time and half-life share the time unit.

Worked out in your browser. Nothing is sent anywhere.

Result

–

Enter three values and press Calculate.

See full result

A half-life calculator works out how much of a decaying substance remains after a given time, how long it takes to fall to a certain amount, what the starting amount was, or what the half-life is. Choose what you want to find, enter the other three values, and this half-life calculator gives the answer along with the fraction remaining, the number of half-lives elapsed, the decay constant and the mean lifetime.

What half-life means

Half-life, written t½, is the time required for a quantity to reduce to half of its initial value. The term is commonly used in nuclear physics to describe how quickly unstable atoms undergo radioactive decay, but it applies to anything that decays exponentially. After one half-life, half remains; after two, a quarter; after three, an eighth; and after n half-lives, the fraction left is 1/2ⁿ.

The half-life formula

Exponential decay can be written in several equivalent ways. The calculator uses:

N(t) = N₀ × (1/2)^(t / t½)

where N₀ is the initial quantity, N(t) is the quantity that remains after time t, and t½ is the half-life. The quantity can be measured in grams, moles, number of atoms or any other unit, as long as N₀ and N use the same one. Rearranging the formula solves for the other values:

  • Starting amount: N₀ = N ÷ (1/2)^(t / t½)
  • Time: t = t½ × log₂(N₀ ÷ N)
  • Half-life: t½ = t ÷ log₂(N₀ ÷ N)

Decay constant and mean lifetime

Two other numbers describe the same decay. The decay constant λ is measured in reciprocal time, such as per year, and the mean lifetime τ is an amount of time. They're linked to the half-life by t½ = ln(2) ÷ λ = τ × ln(2), where ln(2) is about 0.693. The calculator shows both for your half-life.

Worked examples

  • Amount left: 100 grams with a half-life of 5 years, after 15 years. That's 3 half-lives, so 100 × (1/2)³ = 12.5 grams remain, 12.5% of the start. The decay constant is about 0.1386 per year and the mean lifetime about 7.213 years.
  • Time: how long for 100 units to fall to 25 with a half-life of 8 days? 25 is a quarter of 100, which is 2 half-lives, so 16 days.
  • Half-life: a sample falls from 80 to 10 in 30 minutes. That's an eighth, or 3 half-lives, so the half-life is 10 minutes.

How to use the half-life calculator

  1. Choose what to find: the amount left, the starting amount, the time or the half-life.
  2. Enter the other three values. The box for the value you're finding is hidden.
  3. Pick the time unit used for the time and half-life.
  4. Press Calculate.

Where half-life is used

  • Radioactive decay of unstable atoms in physics and chemistry.
  • Dating materials from the amount of a radioactive isotope left.
  • Medicine and pharmacology, where the half-life of a drug describes how quickly the body clears it.
  • Chemistry, for first-order reactions, which follow the same exponential pattern.

For chemical reactions of other orders, the half-life depends on the concentration, so this formula doesn't apply. For anything medical, follow the advice of a doctor or pharmacist.

The half-life table

Because each half-life halves what's left, the amount falls quickly at first and then more slowly. This table shows what remains after each whole number of half-lives:

Half-lives elapsedFraction remainingPercentage remaining
01100%
11/250%
21/425%
31/812.5%
41/166.25%
51/323.125%
61/641.5625%
71/1280.78125%

After seven half-lives, less than 1% of the original amount remains. The calculator also handles times that aren't a whole number of half-lives, such as 2.5 half-lives, which leaves about 17.7%.

Reading the results

Alongside the value you asked for, the calculator shows the fraction of the starting amount that remains and the fraction that has decayed, which always add up to 100%. It also shows how many half-lives have passed, which is the time divided by the half-life. The decay constant tells you the proportion that decays per unit of time at any moment, and the mean lifetime is the average time an individual atom or molecule lasts before it decays. The mean lifetime is always longer than the half-life, by a factor of about 1.44.

Very large and very small numbers

Half-lives range from tiny fractions of a second to billions of years, and amounts can be counted in atoms. The calculator works with any size of number and shows very large or very small results in scientific notation, such as 2.5 × 10⁻⁷, so no digits are lost. Choose the time unit that keeps your numbers easy to read: seconds for short-lived substances, years for long-lived ones.

Choosing what to find

Pick Amount left to see what remains after a time, Starting amount to work backwards from a measurement, Time to see how long it takes to fall to a level, or Half-life to work out the half-life from two measurements taken some time apart. The box for the value you're finding is hidden, so you only fill in what you know.

Common mistakes

  • Mixing time units for the time and the half-life.
  • Different units for the starting amount and the amount left.
  • Expecting it to reach zero. In this model the amount keeps halving and never quite reaches zero.
  • Applying it to non-exponential decay.

What next

Use this often? Add Half-Life to your Home screen.

Frequently asked questions

How does the half-life calculator work?

It uses N(t) = N₀ × (1/2)^(t / t½) and rearranges it to find the amount left, starting amount, time or half-life from the other three values.

What is the half-life formula?

N(t) = N₀ × (1/2)^(t / t½), where N₀ is the starting amount, t the time and t½ the half-life.

How much is left after 3 half-lives?

One eighth, or 12.5%, of the starting amount.

How are half-life and the decay constant related?

t½ = ln(2) ÷ λ, and t½ = τ × ln(2) for the mean lifetime τ; ln(2) is about 0.693.

Can I use any units?

Yes. Use the same unit for both amounts, and the same time unit for the time and half-life.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Education Tools