Saved

Press the star next to a tool's name to save it.

All my tools

Aperture Area Calculator

Use this aperture area calculator to find the diameter and the area of a lens aperture from its focal length and f-number, and compare two f-numbers in stops of light.

Restored your last values ·

Enter the focal length of the lens in millimetres and its f-number. You get the diameter of the aperture and its area. Add a second f-number to see the difference in light in stops.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the focal length and the f-number, then press Calculate.

See full result

An aperture area calculator finds the diameter and the area of a lens aperture from its focal length and f-number. It also compares two f-numbers, and shows how much more or less light one lets in, in stops. It is useful for photographers, astronomers and anyone who works out exposure.

How to use the aperture area calculator

  1. Enter the focal length in millimetres.
  2. Enter the f-number.
  3. Add a second f-number to compare.
  4. Press Calculate.

The f-number

The f-number N is the focal length f divided by the diameter D of the entrance pupil, N = f ÷ D [1]. So the diameter is D = f ÷ N. The page gives examples: a lens of 100 millimetres at f/4 has a pupil of 25 millimetres, and at f/2 it has one of 50 millimetres [1]. A 50 millimetre lens at f/1.8 has a diameter of 27.78 millimetres.

Area

The area of the circular aperture is π (D ÷ 2)². For the 50 millimetre f/1.8 lens, this is 606.02 square millimetres. The light that a lens collects is proportional to this area, which is the same as being proportional to 1 ÷ N² [1]. The page says that the light decreases with the square of the f-number, so a wide aperture with a small N collects far more light.

Stops

The standard full stops are f/1, f/1.4, f/2, f/2.8, f/4, f/5.6, f/8, f/11, f/16 and f/22 [1]. They are powers of the square root of 2, so each step doubles or halves the area, and so the light [1]. The page notes that f/2 admits four times the light of f/4 [1]. The number of stops between two f-numbers is 2 × log₂(N₂ ÷ N₁), a formula that is our own rewriting of this fact.

Comparing f-numbers

Enter a second f-number to compare. From f/2.8 to f/4 the calculator gives 1.029 stops less light, a factor of 2.04, which is a little over one full stop, because the marked numbers are rounded. From f/4 to f/2 it gives exactly 2 stops more, a factor of four. Use this to work out how to change the shutter speed or the ISO to keep an exposure when you change the aperture.

Depth of field

A wider aperture lets in more light but gives a shallower depth of field. The depth of field is not found here, but the calculator on this site for depth of field uses the same f-number. For portraits, photographers pick a wide aperture to blur the background, and for landscapes a narrow one to keep everything sharp.

Telescopes

Astronomers use the same relation. The focal ratio of a telescope is its focal length divided by its aperture, so a telescope of 1,000 millimetres with an aperture of 200 millimetres is f/5. A smaller ratio gives a brighter image of an extended object, such as a nebula, though the total light that it gathers depends on the area of the aperture alone.

Limits

The result is the geometric aperture. Real lenses lose some light by reflection and absorption, which photographers state as T-stops. In some lenses the entrance pupil differs from the physical opening, because of the glass in front of the diaphragm. At very small apertures, diffraction softens the image, so the sharpest result is usually a stop or two from the widest.

Using the calculator

Enter the focal length and the f-number printed on the lens, and read the diameter and the area. To compare two settings, add the second f-number. For a zoom lens, use the focal length at which you are shooting, since the f-number may change as you zoom. The working line shows the formula that was used.

Quick reference

For a 50 millimetre lens, f/1.4 has a diameter of 35.71 millimetres and an area of 1,001.8 square millimetres, double that of f/2, and f/1.8 is 1.7 stops down from f/1. These numbers are our own calculations and are a handy way to check that the calculator gives sensible results.

Values for a 50 millimetre lens

At f/1.4 the diameter is 35.71 millimetres, at f/2 it is 25, at f/2.8 it is 17.86 and at f/4 it is 12.5. The area at f/2 is 490.87 square millimetres, exactly four times the 122.72 at f/4. Each of these figures comes from the f-number formula and is our own calculation, so you can use them to check the calculator.

Equivalent exposures

Opening the aperture by one stop halves the time needed. If a picture is correctly exposed at f/4 and 1/125 of a second, the same exposure at f/2.8 is 1/250, and at f/2 is 1/500. The calculator gives the number of stops between two f-numbers, so you can apply the same rule to any change.

Entering the numbers

Use the true focal length of the lens, not the equivalent focal length that is quoted for a cropped sensor, since the f-number is defined with the real one. If the f-number is shown as a range, such as f/3.5 to 5.6 on a zoom lens, enter the value for the focal length that you are using. The calculator also accepts f-numbers between the marked stops, such as 1.8 or 2.5, which are the third-stop steps that many cameras offer.

Common mistakes

  • Confusing f/2 with a focal length. The f-number is a ratio.
  • Thinking one stop is a change of one in N. It is a factor of √2.
  • Using the crop focal length. Use the real focal length.
  • Ignoring the pupil. The entrance pupil sets the diameter.

What next

Use this often? Add Aperture Are to your Home screen.

Frequently asked questions

What is an aperture area calculator?

A tool that finds the diameter and the area of a lens aperture from its focal length and f-number.

What is the formula for the f-number?

N = f ÷ D, the focal length divided by the entrance pupil diameter.

How much more light does f/2 let in than f/4?

Four times as much, which is two stops.

What are the full stops?

f/1, f/1.4, f/2, f/2.8, f/4, f/5.6, f/8, f/11, f/16 and f/22.

How do I find the diameter of a 50 mm f/1.8 lens?

50 ÷ 1.8 = 27.78 mm.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools