An annulus perimeter calculator finds the total length of the boundary of a flat ring: the region between two circles that share a centre, like a washer, a round picture frame, a running track lane or a pipe seen end-on. Enter the outer radius and the inner radius and the calculator returns the perimeter, both circumferences, the width of the ring, its middle radius and its area. [1]
What is the perimeter of an annulus?
An annulus is described as the region between two concentric circles. [1] It therefore has two boundary curves, not one. The outer circle has radius R and the inner circle has radius r, and R is larger than r. The perimeter of the annulus is the sum of the two circumferences, because a string laid around the whole shape would have to follow both curves.
Some textbooks call only the outer circle the perimeter. This annulus perimeter calculator shows all three numbers so you can pick the one your problem needs: the outer circumference, the inner circumference and the total.
Annulus perimeter formula
The circumference of a circle is 2π times its radius. The perimeter of the annulus adds the circumference of the outer circle and the circumference of the inner circle:
Perimeter = 2πR + 2πr = 2π(R + r)
Two other results follow from the same radii. The width of the ring is R − r. The area is π(R² − r²), which can also be written π(R + r)(R − r). [1] Because R + r is twice the middle radius, the area equals the middle circumference multiplied by the width. That is a handy check on any answer.
How to use the annulus perimeter calculator
- Measure or look up the outer radius R. If you have a diameter, halve it first.
- Enter the inner radius r in the same unit. It must be smaller than R.
- Press Calculate.
- Read the total perimeter first, then the two circumferences, the width and the area below it.
Use one unit for both boxes. Millimetres, centimetres, inches and feet all work. The perimeter and circumferences come out in that unit, and the area comes out in the square of that unit.
Worked example
A ring has an outer radius of 10 and an inner radius of 6, both in centimetres.
| Quantity | Working | Result |
|---|---|---|
| Outer circumference | 2π × 10 | 62.8319 cm |
| Inner circumference | 2π × 6 | 37.6991 cm |
| Total perimeter | 2π × (10 + 6) | 100.531 cm |
| Ring width | 10 − 6 | 4 cm |
| Middle radius | (10 + 6) ÷ 2 | 8 cm |
| Area | π × (100 − 36) | 201.062 cm² |
Check: the middle circumference is 2π × 8 = 50.2655, and 50.2655 × 4 = 201.062, which matches the area.
Where the perimeter of a ring is used
- Edging and trim. A round flower bed with a circular pond in the middle needs edging along both curves.
- Gaskets and washers. The cut length of a seal is the sum of the inner and outer edges.
- Tracks and lanes. A curved lane between two arcs has an inner and an outer edge to mark.
- Pipes and tubes. The end face of a hollow round tube is an annulus. Its edge length matters for welding and sealing.
- Schoolwork. Geometry courses ask for the perimeter, the area and the width of a ring in the same question.
Perimeter, circumference and width compared
| Name | Meaning | Formula |
|---|---|---|
| Outer circumference | Length of the larger circle | 2πR |
| Inner circumference | Length of the hole edge | 2πr |
| Perimeter | Both edges together | 2π(R + r) |
| Width | Distance across the ring | R − r |
| Area | Flat surface of the ring | π(R² − r²) |
Tips and common mistakes
- Do not mix a radius with a diameter. If you measured across the circle, divide by two first.
- Do not mix units, for example inches for R and centimetres for r.
- The width R − r is not the same as the middle radius. The middle radius is (R + r) ÷ 2.
Related ideas
If you need the area of the ring alone, the annulus area calculator covers it with more input choices. For a single circle use the circle calculator, and for a doughnut shape in three dimensions try the torus volume calculator. For general shapes see the area and perimeter calculator.
This tool follows the standard definition of an annulus and the area formula given on the encyclopedia page. [1] The perimeter formula 2π(R + r) is our own working from the circumference of a circle, and the arithmetic is simple enough to check by hand.
Step-by-step method for any ring
Start by writing down which measurement you have. Many drawings give diameters, a wall thickness, or the ring width instead of two radii. If you know the outer radius and the width, subtract the width from the outer radius to get the inner radius. If you know the outer diameter and the inner diameter, halve both. Once you hold two radii, the rest is one line of arithmetic.
Add the two radii, multiply by two, then multiply by pi. That is the whole perimeter. To see the pieces, multiply each radius by two pi separately. Keep a few extra digits while you work and round only at the end, since rounding pi early to 3.14 changes the third significant figure on large rings.
Why the width matters
A thin ring, with a width that is small next to the radius, has almost the same inner and outer circumference, so the total perimeter is close to twice the outer one. A thick ring has a much shorter inner edge. When you compare materials such as edging, gasket stock or paint for the edges, check both edges rather than assuming they match. The area of a ring is the middle circumference times the width, which explains why two rings with the same width but different middle radii differ in area.
The calculator also reports the area so you can switch between border length and surface in the same job: border length for trim, and area for covering the surface of the ring with paving, felt, paint or fabric.
Result: the annulus perimeter calculator gives the total boundary length of any concentric ring from two numbers, with the extra figures you usually need next.
What next
Use this often? Add Annulus Peri to your Home screen.
Frequently asked questions
What is the formula used by an annulus perimeter calculator?
The perimeter is 2πR + 2πr, which equals 2π(R + r), where R is the outer radius and r is the inner radius.
Is the perimeter of an annulus just the outer circle?
No. An annulus has two boundary curves, so its full perimeter adds the outer and inner circumferences. Some courses use only the outer one, so the calculator shows both separately.
How do I find the width of the ring?
Subtract the inner radius from the outer radius. For R = 10 and r = 6 the width is 4.
Can I enter diameters instead of radii?
Not directly. Divide each diameter by two and enter the radii. The two radii must use the same unit.
What if the inner radius is larger than the outer radius?
The calculator reports an error. The outer radius must be the larger of the two.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.