Saved

Press the star next to a tool's name to save it.

All my tools

Angular Resolution Calculator

Use this angular resolution calculator to find the finest detail a telescope or lens can separate, from its aperture and wavelength, with the Rayleigh and Dawes limits.

Restored your last values ·

Enter the diameter of the lens or the telescope in millimetres, and the wavelength if it is not green light. Add a distance to see the smallest detail that can be separated at that distance.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the aperture, then press Calculate.

See full result

An angular resolution calculator finds the finest detail that a telescope, a camera lens or an eye can separate, from the diameter of its aperture and the wavelength of the light. It gives the Rayleigh limit in arcseconds, the Dawes limit for double stars and the smallest separation at a distance that you enter.

How to use the angular resolution calculator

  1. Enter the aperture diameter in millimetres.
  2. Enter the wavelength, or leave it blank for green light.
  3. Add a distance if you want the smallest separation there.
  4. Press Calculate.

The Rayleigh criterion

The angular resolution of a circular aperture is approximately θ ≈ 1.22 λ ÷ D radians, where λ is the wavelength and D the diameter of the aperture [1]. Two points can just be told apart when the centre of one diffraction pattern falls on the first dark ring of the other. A larger aperture or a shorter wavelength gives a finer resolution.

A worked example

For a 100 millimetre aperture and green light of 550 nanometres, θ = 1.22 × 550 × 10⁻⁹ ÷ 0.1 = 6.71 × 10⁻⁶ radians, which is 1.384 arcseconds. The page gives its own example: to resolve 0.1 arcsecond in light of 580 nanometres needs an aperture of about 1.2 metres [1]. The calculator reproduces that scale, since the diameter is inversely proportional to the angle.

The Dawes limit

Observers of double stars use an empirical rule, the Dawes limit, which is θ = 4.56 ÷ D arcseconds with D in inches [1]. The calculator converts the aperture from millimetres to inches by dividing by 25.4, which is our own step. For 100 millimetres it gives 1.158 arcseconds, a little finer than the Rayleigh figure, as the rule is for point stars of similar brightness.

Distance

If you give a distance, the calculator multiplies the angle in radians by the distance to give the smallest separation that can be resolved there. For the Moon, at 384,400,000 metres, a 100 millimetre aperture resolves features about 2,579 metres apart at best. This is our own calculation from the small-angle relation, and it ignores the atmosphere.

Wavelength

Shorter wavelengths resolve finer detail. Blue light of 450 nanometres gives a limit 18 percent finer than green light of 550, and red light of 700 nanometres gives a limit 27 percent coarser. The calculator takes any wavelength in nanometres. If you leave the box blank, it uses 550 nanometres, near the middle of the visible band. The default is our own choice.

Microscopes

The same diffraction limit applies to microscopes, where it is written in terms of a minimum distance between two points. The page gives an example for a microscope with a numerical aperture, 1.22 × 400 nm ÷ (1.45 + 0.95) = 203 nm [1]. That formula involves the numerical aperture and is not the one in this calculator, which is for a lens or a telescope in air.

Limits

The result is the theoretical best. A real telescope has aberrations, a central obstruction and tube currents, and the Earth's atmosphere blurs images to about an arcsecond or worse, so a large amateur telescope is limited by the seeing and not by its aperture. A camera sensor also has its own limit, from the size of its pixels.

Using the calculator

Enter the aperture and, if you like, the wavelength and the distance. Compare the Rayleigh and Dawes figures with the double star that you want to split. Try a larger aperture to see how the limit changes in proportion. For the eye, with a pupil of about 5 millimetres, the limit is near 28 arcseconds in theory, though in practice the eye does worse.

Choosing an instrument

To pick a telescope for double stars or planets, find the finest detail that you want to see in arcseconds, and divide 116 by it to get the aperture in millimetres. This rule of thumb is just the Dawes limit rearranged, and is our own working. Remember that the sky conditions limit what you see on most nights.

Common apertures

A 60 millimetre telescope has a Rayleigh limit of about 2.31 arcseconds at 550 nanometres and a Dawes limit of 1.93. A 114 millimetre telescope has 1.21 and 1.02, a 150 millimetre one 0.92 and 0.77, a 200 millimetre one 0.69 and 0.58, and a 250 millimetre one 0.55 and 0.46. These figures are our own calculations. In practice, seeing limits most observers to about 1 arcsecond, so apertures above about 150 millimetres rarely reach their theoretical limit.

Cameras and the eye

A camera lens is also limited by diffraction, and a narrow aperture makes it worse. The same formula gives the limit for any lens: a 50 millimetre lens at f/8 has an aperture of 6.25 millimetres and a limit of about 22 arcseconds in green light, so the pixels of the sensor are usually the bigger limit.

Reading the two limits

The Rayleigh figure is the usual textbook limit, and it is the one to use for a camera or for a general comparison between instruments. The Dawes figure is an observer's rule for splitting two stars of about equal brightness with a telescope. If the two stars are very different in brightness, the fainter one is lost in the glare of the brighter one, and the real limit is coarser than either number. Always treat the results as the best case, and plan on a margin.

Common mistakes

  • Using the diameter in metres. The box takes millimetres.
  • Expecting the atmosphere to allow it. Seeing limits most telescopes.
  • Mixing the Rayleigh and Dawes limits. They are different rules.
  • Entering the wavelength in micrometres. Use nanometres.

What next

Use this often? Add Angular Reso to your Home screen.

Frequently asked questions

What is an angular resolution calculator?

A tool that finds the smallest angle that an optical instrument can resolve, from its aperture and the wavelength.

What is the Rayleigh criterion?

θ ≈ 1.22 λ ÷ D radians for a circular aperture.

What is the Dawes limit?

An empirical limit for double stars: 4.56 ÷ D arcseconds, with D in inches.

Does a bigger telescope resolve more?

In theory yes, in proportion to its diameter, but the atmosphere often limits it.

Does the wavelength matter?

Yes. Shorter wavelengths give finer resolution.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools