An add feet and inches calculator adds, subtracts, multiplies and divides lengths written in feet and inches, so you don't have to juggle twelves in your head. Enter two lengths, with fractions of an inch if you need them, choose the operation, and this add feet and inches calculator gives the answer in feet and inches to the nearest sixteenth of an inch, along with total inches, decimal feet, yards, centimeters and meters.
How to use the add feet and inches calculator
- Choose the operation: add, subtract, multiply or divide.
- Enter the first length in feet and inches. Inches can be 7, 7.5, 7 1/2 or 3/8.
- Enter the second length, or, to multiply or divide, a plain number.
- Press Calculate.
How feet and inches work
The foot is a unit of length in the British imperial and United States customary systems. One foot is 12 inches and one yard is three feet, and since an international agreement in 1959, a foot is exactly 0.3048 meters, which makes an inch exactly 2.54 centimeters. A prime symbol, ′, is often used for feet and a double prime, ″, for inches, so 5′ 7″ means five feet seven inches.
The method
- Convert each length to inches: feet × 12 + inches.
- Add, subtract, multiply or divide the inches.
- Convert back: divide by 12 for whole feet, and the remainder is the inches.
- Round the leftover fraction to the nearest 1/16 inch and simplify it, so 8/16 becomes 1/2.
Worked examples
- Add: 5′ 7 1/2″ + 3′ 8 3/4″. In inches, 67.5 + 44.75 = 112.25, which is 9′ 4 1/4″, or 285.1 cm.
- Subtract: 5′ 7 1/2″ − 3′ 8 3/4″ = 67.5 − 44.75 = 22.75 inches = 1′ 10 3/4″.
- Multiply: three pieces of 5′ 7 1/2″ need 67.5 × 3 = 202.5 inches = 16′ 10 1/2″.
- Divide: cutting 5′ 7 1/2″ into 4 equal parts gives 67.5 ÷ 4 = 16.875 inches = 1′ 4 7/8″ each.
Where it helps
- Carpentry and DIY: add up board lengths, subtract cuts and divide a length into equal parts.
- Flooring, trim and baseboards: total the lengths of every wall.
- Sewing and crafts: combine measurements in inches and fractions.
- Height: work out the difference between two people's heights.
- Room planning: check whether furniture will fit a wall.
Fractions of an inch
Tape measures in the US are usually marked in sixteenths of an inch, so that's how the calculator rounds. If your answer comes out as 7 8/16, it's shown simplified as 7 1/2. For finer work, the total inches row shows the unrounded value to four decimal places, and centimeters and meters give the metric equivalent.
Converting to and from metric
Because an inch is exactly 2.54 cm, the metric results are exact apart from rounding. To go the other way, from centimeters to feet and inches, use the cm to feet and inches converter.
Negative results
If you subtract a longer length from a shorter one, the answer is negative and shown with a minus sign, which simply means the second length is longer by that amount.
Adding feet and inches by hand
You can also add lengths on paper without converting everything to inches. Write the two lengths one above the other, add the inches column first, then the feet column. If the inches come to 12 or more, take away 12 and carry one extra foot over to the feet column. For example, 4 feet 9 inches plus 2 feet 5 inches gives 6 feet and 14 inches, and since 14 inches is one foot and two inches, the answer is 7 feet 2 inches. Fractions work the same way: add the fractions first, and if they make a whole inch, carry it into the inches column.
Subtracting feet and inches by hand
To subtract, take the inches away first. If the top number of inches is smaller than the bottom one, borrow a foot from the feet column and add 12 inches to the inches column before you subtract. For example, 6 feet 3 inches minus 2 feet 8 inches: borrow a foot so the top becomes 5 feet 15 inches, then subtract to get 3 feet 7 inches. The calculator does this borrowing for you, including with fractions such as quarters, eighths and sixteenths, so it's a quick way to check homework or a cut list.
Multiplying and dividing lengths
Multiplying a length by a number is useful when you need several pieces of the same size, such as shelves, fence boards or stair treads: the calculator gives the total length of material you need. Dividing a length by a number tells you how long each piece will be when a board, a wall or a strip of fabric is split into equal parts, which is handy for spacing pictures, posts, balusters or shelf brackets evenly. Remember that every saw cut removes a little wood, so for exact pieces subtract the width of the blade for each cut before you divide.
Reading the results
The main answer is shown in feet and inches with a fraction, the way it would be read off a tape measure. Below it, the table gives the same length in total inches, decimal feet and yards, which are useful when buying material sold by the foot or the yard, and in centimeters and meters for metric plans. Decimal feet are what many estimating sheets and building plans use, so 9 feet 4 1/4 inches appears as about 9.35 feet.
Common mistakes
- Treating inches as decimals of a foot. 5′ 6″ is 5.5 feet, not 5.6.
- Forgetting to carry 12 inches into a foot when adding.
- Mixing up the saw cut. When dividing a board, allow for the width of each cut.
- Entering 7.1/2. Use 7 1/2 or 7.5.
What next
Use this often? Add Add Feet and to your Home screen.
Frequently asked questions
How does the add feet and inches calculator work?
It converts each length to inches, does the math, then converts the answer back to feet and inches, rounded to the nearest 1/16 inch.
What is 5 ft 7 1/2 in plus 3 ft 8 3/4 in?
9 feet 4 1/4 inches, which is 112.25 inches or about 285.1 cm.
Can I enter fractions of an inch?
Yes. Type inches like 7 1/2, 3/8 or 7.5.
How many inches are in a foot?
12 inches. A foot is exactly 0.3048 meters, so an inch is exactly 2.54 cm.
Can it divide a length into equal parts?
Yes. Choose Divide and enter how many parts; 5′ 7 1/2″ ÷ 4 is 1′ 4 7/8″.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.