Saved

Press the star next to a tool's name to save it.

All my tools

Wind Turbine Profit Calculator

Use this wind turbine profit calculator to find the power, daily energy, revenue and profit of a wind turbine from its blade size, the wind speed and the electricity price.

Restored your last values ·

%
hours
per kWh
per day

Choose a horizontal or vertical axis turbine and the units. Enter the blade length (or the rotor diameter and height), the wind speed, the efficiency, the electricity price and the daily cost of the turbine. You get the power, the energy and the profit for a day.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose the turbine type, enter its size and the wind, then press Calculate.

See full result

A wind turbine profit calculator shows whether a turbine earns more from the electricity it sells than it costs to run. Enter the blade length or the rotor size, the wind speed, the efficiency, the electricity price and the turbine cost per day, and it finds the power, the energy a day, the revenue and the daily profit.

How to use the wind turbine profit calculator

  1. Choose the turbine type and the units.
  2. Enter the blade length, or the rotor diameter and blade height.
  3. Enter the wind speed, the efficiency, the price per kWh and the turbine cost per day.
  4. Press Calculate.

The power in the wind

A wind turbine takes some of the kinetic energy of moving air. The power available is one half times the swept area, times the air density, times the cube of the wind speed, and the turbine captures a fraction of it called the power coefficient or efficiency. Wikipedia's article on Betz's law writes this as P equals Cp times one half times density times area times speed cubed [1]. In this tool the area is the swept area of the rotor, the density is that of air, and the efficiency is the power coefficient.

Swept area for each turbine type

For a horizontal axis turbine, the blades sweep a circle, so the area is pi times the blade length squared. For a vertical axis turbine, the rotor sweeps a rectangle, so the area is the rotor diameter times the blade height. These are plain geometry, a circle for the horizontal rotor and a rectangle for the vertical one. The tool shows the area in square metres and square feet so that you can check it against a data sheet.

From power to profit

Profit is the electricity price times the energy produced, minus the daily cost of the turbine. To turn watts into the energy for a day we use our own step: the energy a day in kilowatt hours is the power in watts, times the hours, divided by 1,000. The revenue is that energy times the price per kilowatt hour, and the profit is the revenue minus the cost per day. The hours default to 24 when you leave the box blank.

A worked example

Take a horizontal turbine with 50 metre blades. The area is 7,853.98 square metres. With an air density of 1.225 kilograms per cubic metre, a wind of 8 metres a second and 40 percent efficiency, the power is 985,203 watts, or 985.20 kilowatts. Over 24 hours this makes 23,645 kilowatt hours. At a price of 0.10 per kilowatt hour the revenue is 2,364.49 a day. If the turbine costs 500 a day, the profit is 1,864.49 a day, or about 680,538 over a year. The numbers are our own example.

Why the wind speed matters so much

The speed is cubed in the power formula. If the wind doubles, the power goes up eight times, and if it falls by a quarter the power falls by more than half. This is why a turbine in a steady 8 metres a second wind earns far more than one in a 5 metres a second wind. Wind speeds differ a lot between sites, so try values across a range such as 4 to 10 metres a second to see how sensitive the profit is.

Efficiency and the Betz limit

Betz's law says that no wind turbine can capture more than 16/27 of the power in the wind, which is 59.3 percent [1]. Wikipedia reports that commercial turbines reached 75 to 80 percent of the Betz limit at rated speed [4], which is roughly 44 to 47 percent. The calculator warns you when you enter more than 59.3 percent, because that is not physically possible. The 40 percent in our example is a plausible figure, but real turbines vary with the wind speed.

Air density

The default air density is 1.225 kilograms per cubic metre, the standard sea-level value for air at 15 degrees Celsius [3]. Air is thinner at altitude and in warm weather, so the true density at your site may be lower, which lowers the power in proportion. In US units the box takes pounds per cubic foot, and 0.0765 pounds per cubic foot is about 1.225 kilograms per cubic metre. Leave it blank to use the default.

Capacity factor and steady wind

Real wind farms do not run at full output all day. Wikipedia says that typical capacity factors of current wind farms are between 25 and 45 percent [2]. This tool does not have a capacity factor, because the wind speed that you enter is treated as steady for the hours you give. If you want an average day, use an average wind speed, or reduce the hours. Using both a capacity factor and a steady speed would count the variation twice.

Break-even price and cost

The tool also gives the break-even price, which is the daily turbine cost divided by the energy produced in a day. If your electricity price is lower than this, the turbine loses money at these settings. The cost per day is a single number that you enter, such as the loan, maintenance and insurance of the turbine divided by the days in a year. The tool has no model of tax, depreciation or grid connection costs.

What the tool does not cover

This tool has no capacity factor, no tax and no grid connection costs, and it has no default price or cost. The step from power to daily energy, the default of 24 hours and the 40 percent example are our own working, so check them against your own site data.

Common mistakes

  • Using the rotor diameter for a horizontal turbine. Enter the blade length, which is the radius of the circle.
  • Entering the wind speed in the wrong unit. Check whether the box asks for mph or metres a second.
  • Using a peak efficiency. Use the average power coefficient, below 59.3 percent.
  • Forgetting the hours. If the wind does not blow all day, enter fewer hours.

What next

Use this often? Add Wind Turbine to your Home screen.

Frequently asked questions

What is a wind turbine profit calculator?

A tool that estimates the energy, revenue and profit of a wind turbine from its size, the wind speed, its efficiency, the electricity price and the daily cost.

What is the wind turbine power formula?

Power equals one half times the swept area, times the air density, times the wind speed cubed, times the efficiency.

What is the Betz limit?

No turbine can capture more than 16/27, or 59.3 percent, of the power in the wind.

How is the daily profit worked out?

Energy in kWh a day times the price per kWh, minus the turbine cost per day.

Does the calculator include a capacity factor?

No. It assumes one steady wind speed for the hours you enter, so a capacity factor would count the variation twice.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters