Saved

Press the star next to a tool's name to save it.

All my tools

Watts to Lux Calculator

Use this watts to lux calculator to estimate the average illuminance in lux and foot-candles from lamp watts, luminous efficacy and the area lit.

Restored your last values ·

W
lm/W
%

Enter the power of the lamp in watts, its luminous efficacy in lumens per watt (printed on the pack) and the area it lights. You get the average illuminance in lux and foot-candles.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the watts, the lumens per watt and the area, then press Calculate.

See full result

A watts to lux calculator estimates the average illuminance on a surface from the power of a lamp. Watts alone do not give lux, so you also enter the luminous efficacy in lumens per watt and the area that the light covers. The result is in lux and foot-candles.

How to use the watts to lux calculator

  1. Enter the power in watts.
  2. Enter the luminous efficacy in lumens per watt.
  3. Enter the area and pick US or Metric units.
  4. Optionally add the share of light that reaches the area, then press Calculate.

Why watts are not enough

The watt measures the electric power a lamp uses, not how much light it gives. Luminous efficacy is a measure of how efficiently a source produces visible light [1]. It is the ratio of luminous flux to power, in lumens per watt [1]. Two lamps of the same wattage can differ several times in light output, so the conversion needs the efficacy.

From watts to lumens

Multiply the watts by the luminous efficacy to get the light output in lumens. A 10 watt lamp with an efficacy of 100 lumens per watt gives 1,000 lumens. The efficacy is usually printed on the pack or the data sheet. Wikipedia gives the theoretical maximum of 683.002 lumens per watt for monochromatic light at 555 nanometres [1], so no real lamp can reach it, and white light sources are lower.

From lumens to lux

Lux is the SI unit of illuminance, and it is equal to one lumen per square metre [2]. So the average illuminance is the light output in lumens divided by the area in square metres. The 1,000 lumens from the example, spread over 4 square metres, give 250 lux. The calculator shows this as the main result.

Foot-candles

One foot-candle is about 10.764 lux [2]. The calculator shows the value in foot-candles too, because US lighting guides often use them. The 250 lux of the example are 23.226 foot-candles. If you work in square feet, the calculator turns the area into square metres by dividing by 10.764, which is our own working from the same ratio.

Worked example, US units

A 10 watt LED at 100 lumens per watt lights a 40 square foot area, with 80 percent of the light reaching it. The output is 10 × 100 × 0.8 = 800 lumens. The area is 40 ÷ 10.764 = 3.7161 square metres. The average illuminance is 800 ÷ 3.7161 = 215.28 lux, which is exactly 20 foot-candles.

The share of light that reaches the area

A lamp does not put every lumen on the floor or the desk. Some light is absorbed by the shade, some goes to the walls and ceiling. The optional share box lets you reduce the output. Leave it blank for 100 percent. The share is an assumption that you choose, and it is not taken from the pages we opened, so try a few values to see how sensitive the result is.

What the average hides

The calculator assumes the light spreads evenly. In a real room, the light is brighter right below the lamp and dimmer at the edges, and walls and ceiling add reflected light. The distance from the lamp matters too. For point sources, the illuminance falls with the square of the distance. For this reason, treat the answer as an average level, not as a reading you would get from a light meter.

Typical use

Use the page to compare lamp choices, to plan how many lamps you need, or to check a target such as 300 lux for a desk. Divide the target by the result to see how many lamps of that size you need. If you know the lumens already, the lumens to watts calculator and the illuminance converter on this site are good partners.

Reading the numbers

The main result is the illuminance in lux, with foot-candles in brackets. A second line shows the lumens, and a third explains the working. Change any value and press Calculate again. Doubling the area halves the lux, and doubling the efficacy doubles it. Always read the efficacy from the lamp pack rather than guessing it from the wattage.

Planning a room

Common targets are a few hundred lux for a desk or a kitchen counter and less for a living room, but the right level depends on the task and on local guidance, which this page does not give. To plan, pick a target, find the lumens that you need by multiplying the target in lux by the area in square metres, and then divide by the efficacy to get the watts. For 300 lux over 4 square metres, you need 1,200 lumens, which is 12 watts at 100 lumens per watt. The calculator works the other way round, from the watts to the lux, so try a few lamp sizes.

Comparing lamp types

Because the efficacy is an input, you can compare two lamps on the same footing. A lamp that gives 100 lumens per watt needs only a tenth of the power of one that gives 10 lumens per watt for the same light output. Enter each lamp's efficacy from its pack, keep the area the same, and see how many watts each one needs to reach your target level.

Common mistakes

  • Treating watts as light. A 10 watt LED and a 10 watt filament lamp give very different light.
  • Mixing square feet and square metres. Pick the units to match the area.
  • Using a lamp's total power for a fixture with a driver loss. Use the power at the lamp if you know it.
  • Expecting a light meter match. The result is an even average.

What next

Use this often? Add Watts to Lux to your Home screen.

Frequently asked questions

How does the watts to lux calculator work?

Multiply the watts by the luminous efficacy in lumens per watt to get lumens, then divide by the area in square metres.

Why do I need the lumens per watt?

Because the watt measures power used, not light given. The efficacy links the two.

What is a lux?

One lumen per square metre.

How many lux is a foot-candle?

About 10.764 lux.

Is the result exact?

No. It is an even average over the area. Real light varies with the fixture, the height and reflections.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools