A time-lapse calculator plans a time-lapse shot. Enter how long the event lasts, how long you want the clip to be and its playback rate, and it gives the number of frames you need, the interval between shots and how much faster the action will look. Add a shutter angle for the exposure time.
How to use the time-lapse calculator
- Enter the event duration and its unit.
- Enter the clip length and the playback frame rate.
- Add a shutter angle for the exposure time.
- Press Calculate.
Frames and interval
The number of frames in the clip is its length in seconds times the playback frame rate, and the interval between shots is the event duration divided by the number of frames. The pages that we read do not give these two formulas, so they are our own statement of simple arithmetic. For a 10-second clip at 24 frames per second, you need 240 frames. For an event of 2 hours, which is 7,200 seconds, the interval is 7,200 ÷ 240 = 30 seconds.
Frame rates
Film is often projected at 24 frames per second, and the normal rate is between 24 and 30 frames per second [1]. Camera speeds of 8 to 22 frames per second are usually called undercranked fast motion, and anything slower is time-lapse [1]. The calculator takes the playback rate as an input, so use the rate of your project, such as 24, 25 or 30.
How much faster
The page gives the perceived speed as the projection frame rate divided by the camera frame rate, times the actual speed [1]. Recording at 1 frame per second and playing at 30 gives an apparent 30 times speed increase [1]. Recording at 12 frames per second and playing at 24 looks twice as fast [1]. In the calculator, the speed-up is the event duration divided by the clip length, which is 720 times in our example of 2 hours in 10 seconds.
Examples from the page
The page gives examples of what time-lapse can show: two hours compressed into a few seconds, and a year at 50,000 times the normal speed in just 12 minutes [1]. Use the calculator for your own: a day of 24 hours shown in a 30-second clip at 30 frames per second needs 900 frames, one every 96 seconds. A sunset of 30 minutes in a 10-second clip at 24 frames needs a frame every 7.5 seconds.
Exposure and shutter angle
The exposure time equals the shutter angle divided by 360 degrees, times the frame interval [1]. A shutter angle of 180 degrees means the exposure is half the interval. The page says that a 30-second interval with a 15-second exposure gives a smooth, normal-shutter look, while a very short exposure, such as 1/50 of a second every 30 seconds, gives a stop-motion look [1]. Enter 180 to see the 15 seconds.
Light
A long exposure lets in far more light. The page notes that 15 seconds gets 750 times more light than 1/50 of a second, which is over 9 stops [1]. This matters for day-to-night shots, where the light changes a lot, and you may need to change the exposure as the day goes on. The calculator gives the longest exposure that fits the interval, which you can set with a filter or the aperture.
Practical limits
Check that your camera can take a picture at the interval that you need, which for a fast interval may be limited by the time to write each file. Make sure the battery and the memory card last for the whole event: 240 frames at 25 megabytes each need 6 gigabytes. Use a firm tripod, turn off autofocus and automatic settings that change from frame to frame, and fix the white balance.
Using the calculator
Start with the clip you want, then choose the event. If the interval comes out too long or too short for the subject, change the clip length or the playback rate, and run it again. For a moving subject, such as clouds, a short interval of a few seconds works well. For a slow subject, such as a plant growing or a building going up, intervals of minutes or hours are enough.
More worked examples
A plant that grows for 7 days, shown in a 15-second clip at 30 frames per second, needs 450 frames. The interval is 604,800 seconds divided by 450, which is 1,344 seconds, or about 22.4 minutes. If each frame is a 25-megabyte file, the shoot takes about 11.25 gigabytes. A sunset of 30 minutes in a 10-second clip at 24 frames per second needs 240 frames, one every 7.5 seconds. These are our own calculations.
Choosing the clip length
Short clips are easier to watch than long ones. A time-lapse of 5 to 15 seconds is usually enough to show a change, and a longer one needs a reason to keep the viewer's attention. If you are unsure, shoot more than you need and speed up or trim in the edit: it is easy to drop frames, but impossible to add them.
Common mistakes
- Forgetting the playback rate. 24 and 30 frames per second give different frame counts.
- Using an exposure longer than the interval. It must fit within it.
- Letting the camera change settings. Fix focus and white balance.
- Running out of memory. Count the frames and the file size.
What next
Use this often? Add Time-Lapse to your Home screen.
Frequently asked questions
What is a time-lapse calculator?
A tool that plans the interval and the number of frames for a time-lapse clip.
How do I work out the interval for a time-lapse?
Divide the event duration by the number of frames, which is the clip length times the playback rate.
How many frames do I need for a 10-second clip?
240 at 24 frames per second, or 300 at 30.
How is exposure time related to shutter angle?
Exposure time = shutter angle ÷ 360° × the frame interval.
How much faster will the action look?
The event duration divided by the clip length. Two hours in 10 seconds is 720 times.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.