A speaking time calculator tells you how long a speech or a script will take to say, from the number of words and the pace, and how many words you can fit in a given time. It uses speaking rates in words per minute for presentations, audiobooks and radio, or your own pace.
How to use the speaking time calculator
- Choose what you want.
- Choose the pace, or enter your own words per minute.
- Enter the number of words or the minutes available.
- Press Calculate.
Words per minute
The words-per-minute measure comes from typing and Morse code, and it standardises a word as five characters or keystrokes in English, including spaces and punctuation [1]. In speech, the page on speech tempo says that the word is not well defined, and that the measure was borrowed from other fields [2]. For a calculator, it is a handy standard, and the number of words in a text is easy to count.
Typical paces
The page on words per minute gives audiobooks a recommended rate of 150 to 160 words per minute, and slide presentations a comfortable pace of 100 to 125 words per minute [1]. Auctioneers speak at about 250 words per minute, and policy debaters at 350 to over 500 [1]. A study of reading aloud in 17 languages found 184 words per minute on average, and 228 for English [1]. The calculator offers the first two as ranges.
Radio
The page on speech tempo gives radio bulletins a rate of 168 words per minute for English from the BBC and 210 for Spanish from RNE [2]. It also gives a typical speaking rate for English of 4 syllables per second [2]. The calculator uses the BBC figure as the radio option.
A worked example
A speech of 1,500 words at 125 words per minute takes 12 minutes, and at 100 words per minute it takes 15, so the slide presentation option gives a range of 12 to 15 minutes. At the audiobook pace of 150 to 160 words per minute it takes between 9 minutes 23 seconds and 10 minutes. At your own pace of 150, it is 10 minutes. These are our own calculations.
Working backwards
If you have a slot of 10 minutes, the second mode tells you how many words to prepare: 1,000 to 1,250 words at the presentation pace. Write to the lower end if you have slides, a demonstration or time for questions, since each of these takes time without words. Many speakers aim for the low end of the range.
Characters
If you know the number of characters, including spaces, the calculator divides by five to get the number of words, using the standard convention [1]. That is useful for a social media post or a caption, where the platform counts characters. A text of 7,500 characters is about 1,500 words.
What lengthens a talk
The calculator gives the time of continuous speech. Real talks include pauses for effect, time to show slides, laughter, questions and slips. Add 10 to 20 percent to the result as a rough rule, and test with a timer. If you read from a script, you may be faster than when speaking from notes.
Making it fit
Cut the least important points first if you are over time, and keep the opening and the closing, which are the most memorable. If you are under, add an example or a story, and not a longer list. Use the calculator again after every change to see how far you are from the target.
Planning a speech
Start with the time you have and work out the words, then write the speech to that length. For a five-minute toast at the presentation pace, aim for 500 to 600 words. For a 20-minute talk, 2,000 to 2,500 words, and for 45 minutes, 4,500 to 5,600. Remember that the slides may take as long as the words, so a deck of 20 slides in 20 minutes is about a minute per slide, so check the pace of the slides and the words together.
Practising
Read your speech aloud with a timer, and compare the time with the calculator's. If you are consistently faster or slower than the estimate, enter your own pace in words per minute. Record yourself, since it is easy to speed up when you are nervous. Slow down at the key points to give the audience time to take them in.
Other uses
The same calculation works for a video script, a podcast, a voice-over or a reading for an audiobook. Count the words in your script, choose the audiobook pace for narration, and you have a good estimate of the running time. Add time for music, pauses and sound effects as needed.
Accents and languages
Speaking rates differ by language and by speaker, and the figures in the calculator are for English. A speaker of another language may use more or fewer words per minute, so enter your own pace if you know it.
Common mistakes
- Using the reading pace for a speech. People read aloud faster than they present.
- Forgetting pauses and slides. Add time for them.
- Counting characters as words. Divide by five, or count the words.
- Planning to the full minute. Leave a margin.
What next
Use this often? Add Speaking Tim to your Home screen.
Frequently asked questions
What is a speaking time calculator?
A tool that finds how long a text takes to say from its word count and speaking pace.
How many words per minute is a speech?
A comfortable slide presentation is about 100 to 125 words per minute, and an audiobook 150 to 160.
How many words is a 10 minute speech?
About 1,000 to 1,250 words at a presentation pace.
How many characters make a word?
Five, including spaces and punctuation, by the usual convention.
Should I add time for pauses?
Yes. Add 10 to 20 percent for pauses, slides and questions.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.