Saved

Press the star next to a tool's name to save it.

All my tools

Tie Length Calculator

Use this tie length calculator to find your tie size band from your height, with the standard and extra long lengths that two source pages give. It is a lookup.

Restored your last values ·

ft
in
cm

Choose US or metric units and enter your height. You get the tie size band, short, standard or extra long, and the lengths that the source pages give for it.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose units, enter your height, then press Calculate.

See full result

A tie length calculator usually promises an exact figure. This one is a simple height lookup that shows only the lengths that two source pages give: standard ties of 57 to 58 inches and extra long ties of 61, 63 or 67 inches. It does not adjust for the knot or the collar, because neither page gives a figure for them.

How to use the tie length calculator

  1. Choose US or metric units.
  2. Enter your height, in feet and inches or in centimetres.
  3. Press Calculate to see the size band.

What the lookup does

You enter your height, and the tool places you in one of three bands: short, standard or extra long. It then shows the tie lengths that the pages list for that band. There is no formula here. The bands are a lookup rule of thumb and not a published standard. That is why this tool is called a lookup and not a calculation.

The height bands

The tool puts men under 5 ft 7 in in the short band, men from 5 ft 7 in up to 6 ft 1 in in the standard band, and men of 6 ft 1 in or taller in the extra long band. These limits are our own rule of thumb, meant mainly for a four-in-hand knot.

The lengths on the pages

The Tie Bar says its regular neckties are about 58 inches, which it calls the standard necktie length, and that it also offers extra long ties of 63 inches [2]. The Tie Mart size chart says that a standard tie is 57 inches for most men, and that extra long ties of 61, 63 and 67 inches are for men who are over 6 ft [1]. The tool shows 57 to 58 inches for the standard band, a planning range of our own around that figure. Neither page names a length for men under 5 ft 7 in. In that case, the tool says so, and does not make up a figure.

Where the tip should fall

Tie Mart describes how a tie should look when it is tied. The tip should reach the belt buckle [1], or the top of the waistband. This is a more useful test than any number, because it works for your own shirt, your own knot and your own build. If a tie is too short, the tip stops above the belt, and if it is too long, it hangs below it.

A worked example

A man who is 6 ft 0 in tall falls in the standard band. The tool shows 57 to 58 inches, which is 144.8 to 147.3 cm at 2.54 cm to an inch. A man of 6 ft 1 in moves to the extra long band.

Where the extra long band starts

Tie Mart says that extra long ties are for men over 6 ft [1]. This tool starts its extra long band at 6 ft 1 in, a limit of our own. If you are exactly 6 ft 0 in, ask whether an extra long tie suits your build.

Metric units

In metric mode, enter your height in centimetres. The tool converts it to inches at 2.54 cm to an inch before it looks up the band, and then shows the lengths in centimetres too. For example, 183 cm is 72.05 inches, which is standard. 170 cm is 66.93 inches, just under 5 ft 7 in, so it is short, and 190 cm is extra long.

Knots and collars

Tie Mart says only that larger knots, such as the Windsor, use more fabric, which makes the tie appear shorter [1]. Neither source gives the inches that a knot takes, so we make no adjustment for the knot or the collar size. If you tie a large knot, it is our own suggestion to look at the longer end of the range.

The short band

Neither page names a length for men under 5 ft 7 in, so the tool cannot show one. If you are under 5 ft 7 in, check the length printed on the tie that you want, or ask the seller. The tip rule still applies: the tie should reach the top of the belt buckle, and a standard tie of 57 inches may be a little long for you.

Limits

Height is only a rough guide to tie length. Your torso, where you wear your belt and the height of your collar matter as well. Measure a tie that you already like, from the wide end to the tip, and compare it with the length shown. The tool covers heights from 4 ft to 8 ft.

Checking against a tie you own

The most reliable test is a tie that already fits you. Lay it flat and measure it from the wide end to the tip, then compare the figure with the length shown here. If it falls inside the range for your band and the tip reaches the belt, you have your size. If you buy online, look for the length in the product description, and ask the seller if it is missing.

Why one number cannot fit everyone

Two men of the same height can have different torsos and wear their trousers at different heights. A band therefore tells you where to start, not where to stop, which is why both pages end with the same tip test at the belt buckle.

Common mistakes

  • Treating the band as exact. It is a rule of thumb for a four-in-hand knot.
  • Forgetting the knot. A large knot uses more fabric.
  • Expecting a short tie length. The pages do not give one.
  • Trusting height alone. Check where the tip falls against the belt.

What next

Use this often? Add Tie Length to your Home screen.

Frequently asked questions

What is a tie length calculator?

A tool that places you in a tie size band from your height. This one is a lookup, not a formula, and shows only the lengths that two source pages give.

How long is a standard tie?

About 57 to 58 inches, which is 144.8 to 147.3 cm. Tie Mart gives 57 inches for most men.

Which heights need an extra long tie?

The calculator uses 6 ft 1 in or taller. Tie Mart gives extra long ties of 61, 63 and 67 inches for men over 6 ft.

Does it adjust for the knot or the collar?

No. Neither page gives a figure for them. Tie Mart says that larger knots such as the Windsor use more fabric.

Where should the tip of the tie fall?

At the belt buckle, or the top of the waistband.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Health & Fitness Tools