Saved

Press the star next to a tool's name to save it.

All my tools

Hat Size Converter

Enter your head measurement or a hat size to convert it to US, UK and European sizes. Measure in inches or centimeters, and use it as a starting point when you shop.

Restored your last values ·

Enter US and UK sizes as decimals: 7 1/8 is 7.125. Your result opens on the next page.

Your hat size

US 7

Enter a measurement to see your hat size.

See full result

How to measure your head

  1. Use a soft tape measure, or a piece of string you can lay against a ruler.
  2. Wrap it around your head about a finger’s width above your eyebrows and ears, where a hat would sit.
  3. Keep it snug but not tight, and measure twice.

Hat sizes are determined by measuring the circumference of the head about 1 cm above the ears. [1] If you’re between sizes, most people go up to the next one, since a hat can be made a little smaller with a sizing strip.

How hat sizes work

US size = head size in inches ÷ π, to the nearest ⅛

European size = head size in centimeters

A US hat size is a measurement of head diameter in inches, and it can be computed from a circumference in centimeters by dividing by 8, because 2.54 times π is almost exactly 8. [1] Our tool uses the same idea in inches. A 22-inch head gives 22 ÷ 3.1416 = 7.0, so that’s a US size 7. In centimeters, it’s about 56, and we show that number as the European size, which is our own working. The UK column here is also our own approximation, about ⅛ below US, which makes this head a UK 6 7/8.

Hat size chart

Head (in)Head (cm)USUK (approx.)European
20.552.16 1/26 3/852
2153.36 5/86 1/253
21.554.66 7/86 3/455
2255.976 7/856
22.557.17 1/8757
2358.47 3/87 1/458
23.559.77 1/27 3/860
2461.07 5/87 1/261

Why your size may differ

Hat sizes aren’t fully standardized. Charts don’t all agree on UK sizes (the chart on Wikipedia lists UK sizes equal to or slightly above the US ones) [1], and brands and styles can fit differently, so treat these results as a starting point. A stiff fitted cap or a felt hat usually fits less forgivingly than a soft beanie. Before you buy, check the maker’s own chart.

Small, medium and large sizes aren’t shown because they vary too much between brands. Many brands list their own measurements in inches or centimeters, so your head size is the most useful number to know.

For other length conversions, try the cm to inches converter.

How to use the hat size converter

  1. Type a number in Measurement or size. This can be your head measurement or a size printed on a hat label.
  2. Tell the tool what it is. Under What did you enter?, pick head size in inches, head size in cm, US hat size, UK hat size or European hat size.
  3. Write fractions as decimals. A US or UK size of 7 1/8 goes in as 7.125, and 6 3/4 goes in as 6.75.
  4. Press Convert. You see your US fitted size, the approximate UK size, the European size, and your head size in both inches and centimeters.

The tool works out a head size first and then gives every other size from it. So you can start from any system and still see all five numbers.

Worked examples

From a tape measure. Say your head measures 57 cm. Choose head size in cm and enter 57. The converter turns that into 22.44 inches, divides by π and rounds to the nearest eighth, which gives a US 7 1/8. The UK size shows as 7 and the European size as 57.

From a hat you already own. Your favorite cap says 7 1/4 and you want a European brand. Choose US hat size and enter 7.25. The tool works back to a head of about 22.78 inches, or 57.9 cm, so the European size is 58. The UK size shows as 7 1/8.

A size worked out from a label is only as good as the label. If the old hat felt loose or tight, measure your head as well and trust the tape.

Head sizes covered by each US size

Because the converter rounds to the nearest eighth, each US size covers a small band of head sizes. These bands come straight from the tool’s own rounding, so they line up with the result you get.

US sizeHead size (about)
6 3/421.0 to 21.4 in
6 7/821.4 to 21.8 in
721.8 to 22.2 in
7 1/822.2 to 22.6 in
7 1/422.6 to 23.0 in
7 3/823.0 to 23.4 in
7 1/223.4 to 23.8 in
7 5/823.8 to 24.2 in

Each step is a little under half an inch of head size. If your measurement lands right on the edge of a band, try both sizes on, or go up a size as the tip above suggests.

Reading fraction sizes

US and UK hat labels use eighths of an inch. The converter shows the same fractions, reduced where it can, so four eighths reads as 1/2. When you type a size in, use the decimal that matches the fraction.

FractionDecimal to type
1/8.125
1/4.25
3/8.375
1/2.5
5/8.625
3/4.75
7/8.875

Common mistakes

  • Typing a fraction as digits. 7 1/8 is 7.125, not 7.18. The second number would be read as a slightly different size.
  • Picking the wrong input. A 57 entered as inches is far outside normal head sizes, so the tool asks you to check your number. Make sure What did you enter? matches the number you typed.
  • Measuring in the wrong place. A tape that sits too low on the forehead or slides up at the back gives a smaller number than the hat band needs.
  • Pulling the tape tight. Keep it snug, the way a hat should feel, not squeezed.

What the converter can’t tell you

The result is a starting point, not a promise of fit. The European size here is simply your head size in whole centimeters, and the UK figure is our own estimate one eighth below the US size. Neither comes from a brand’s chart. Head shape matters too: an oval head and a round head with the same measurement can feel different in the same hat. The tool also accepts head sizes only between 12 and 32 inches, so a number outside that range shows a message instead of a size.

What next

Use this often? Add Hat Size to your Home screen.

Frequently asked questions

How do I find my hat size?

Measure around your head about a finger’s width above your eyebrows and ears. Divide inches by 3.1416 for a US size. A 22-inch head is about a size 7.

What is the average hat size?

It varies by person, so measuring is the best way to know. Many adult heads fall around 21 to 24 inches, which is about a US 6 5/8 to 7 5/8.

Are US and UK hat sizes the same?

Not quite. UK sizes are usually within an eighth of a size of US sizes, but charts differ, so check the maker’s chart.

What if I’m between hat sizes?

Most people go up to the next size. A sizing strip inside the band can make a hat slightly smaller, but a tight hat can’t easily be stretched.

How do I enter a hat size like 7 1/8?

Type it as a decimal, 7.125, and choose US hat size or UK hat size under What did you enter? A quarter is .25, three eighths is .375 and a half is .5.

Why is the UK size one step below the US size here?

The converter uses its own simple rule of one eighth below the US size. Published charts don’t all agree on UK sizes, so treat it as an estimate and check the maker’s chart.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters