How this calculator works
Clothing guides often describe bodies by comparing the bust, waist and hips. This calculator uses those three measurements to suggest the closest of five common shapes.
There’s no single scientific standard for body shapes, so these are our own simple rules of thumb, based on proportions. A 2021 study in Ergonomics looked at a well-known shape system and found that small differences in where measurements were taken put the same body in a different shape in up to 40% of cases. So please treat your result as a rough guide for clothes shopping, not a fact about you.
The rules we use
| Shape | Our rule |
|---|---|
| Apple | Waist is at least 95% of the larger of bust or hips |
| Pear | Hips are more than 5% larger than bust |
| Inverted triangle | Bust is more than 5% larger than hips |
| Hourglass | Bust and hips are within 5%, and waist is under 75% of the larger one |
| Rectangle | Bust and hips are within 5%, and waist is 75% or more of the larger one |
Worked example
With a 36 in bust, 27 in waist and 37 in hips, bust and hips are within 5% of each other. The waist is 27 ÷ 37 = 73% of the hips, so the result is hourglass.
How to measure
- Bust or chest: around the fullest part.
- Waist: around the narrowest part.
- Hips: around the widest part.
Keep the tape level and snug, but not tight.
Body shape and body type
People also use “body type” for ectomorph, mesomorph and endomorph. Those labels describe build more broadly and can’t be worked out from a tape measure, so this calculator doesn’t try.
About the waist-to-hip ratio
The World Health Organization links a waist-to-hip ratio of 0.90 or more in men, or 0.85 or more in women, with a substantially increased risk of metabolic problems. It’s only one measure, and this tool can’t assess your health. If you’re concerned, talk to a healthcare professional.
Your privacy
The calculation runs on your device. Your measurements aren’t sent to our servers or to Google, and they aren’t saved.
How to use the body type calculator
- Pick your units. Choose in or cm. If you switch after typing, the calculator converts what you’ve entered.
- Enter your bust or chest. Measure around the fullest part.
- Enter your waist. Measure around the narrowest part.
- Enter your hips. Measure around the widest part.
- Press Find my shape. You see your closest shape, a short description and a table with your waist-to-hip ratio and the differences between your measurements.
Each measurement can be up to 120 in, or 300 cm.
Worked examples for each shape
These are the results the calculator gives for five sets of measurements in inches:
| Bust | Waist | Hips | Result | Why |
|---|---|---|---|---|
| 36 | 27 | 37 | Hourglass | Bust and hips within 5%, waist 73% of hips |
| 35 | 30 | 36 | Rectangle | Bust and hips within 5%, waist 83% of hips |
| 34 | 28 | 40 | Pear | Hips 6 in larger, a 15% gap |
| 40 | 32 | 36 | Inverted triangle | Bust 4 in larger, a 10% gap |
| 38 | 37 | 38 | Apple | Waist 97% of the bust and hips |
The calculator checks the apple rule first, so a fuller waist gives apple even when the bust and hips differ.
Why a small change can flip the result
Each rule has a cut-off, and measurements close to it can land either side. With a 38 in bust, 37 in waist and 39 in hips, the waist is 94.9% of the hips, just under the 95% apple line, so the result is rectangle. Make the hips 38 in and it becomes apple. In the same way, 36, 29 and 37 gives rectangle, while 36, 27 and 37 gives hourglass. If your result is near a line, measure again and treat both shapes as possible.
Reading the table under your result
- Waist-to-hip ratio is your waist divided by your hips, to two decimal places. For 27 in and 37 in, it’s 0.73.
- Bust minus hips is negative when your hips are larger, such as −1 in in that example.
- Hips minus waist and bust minus waist show how much narrower your waist is, here 10 in and 9 in.
These numbers are also handy when you shop. Clothing size charts usually list bust, waist and hip measurements separately, and charts can differ between brands. Compare each of your three numbers with the chart for the brand you’re buying, rather than relying on your shape alone. Our dress size converter can help you compare sizes between countries.
A clothing waist isn’t a health waist
This calculator uses the narrowest part of your waist, as clothing guides do. The NHLBI measures waist size for health in a different place: standing, with the tape around your middle just above your hipbones, just after you breathe out.[3] It says a waist of more than 35 inches for women or more than 40 inches for men increases your risk.[3] For health measures, try our waist-to-hip ratio calculator or waist-to-height ratio calculator, and talk to a doctor about what your numbers mean for you.
Common measuring mistakes
- Measuring over clothes. Thick fabric adds to every number. Measure over light underwear or bare skin.
- Pulling the tape tight. The tape should lie flat without pressing in.
- Letting the tape tilt. Keep it level all the way around, which is easier in front of a mirror.
- Using a bra band size. Bra sizes aren’t body measurements. Measure around the fullest part of your bust.
- Mixing units. Enter all three numbers in inches or all three in centimeters.
What next
Use this often? Add Body Type to your Home screen.
Frequently asked questions
How do I know my body type?
Measure your bust, waist and hips, then compare them. This calculator does that for you and suggests the closest common shape. Treat it as a rough guide.
Is this calculator scientific?
Not really. There’s no single standard for body shapes, so it uses our own simple rules of thumb. It’s meant for things like choosing clothes.
Does a body shape say anything about my health?
Your shape alone doesn’t. Your waist-to-hip ratio is one measure doctors can use, but only a healthcare professional can assess your health.
Can men use this calculator?
Yes. Use your chest measurement for the bust. Most shape guides were written with women’s clothing in mind, so it may be less useful.
What does the waist-to-hip ratio in my result mean?
It’s your waist divided by your hips, shown to two decimal places. A 27 in waist and 37 in hips give 0.73. The calculator uses your narrowest waist, as clothing guides do, so it may differ from a waist measured for health.
Why did my body shape change when I measured again?
Each shape has a cut-off, so measurements near one can fall either side. A tape that sits a little higher or lower can be enough. Measure two or three times and use the shape that comes up most.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.