Saved

Press the star next to a tool's name to save it.

All my tools

Tension Calculator

Use this tension calculator to find the tension in a rope or cable: one hanging load, a load on two ropes at angles, or the rope between two pulled objects, in US or metric units.

Restored your last values ·

°
°
°

Choose US or metric units, then the case. For a hanging load enter its mass and, if it speeds up or slows down, its acceleration. For two ropes enter the mass and the angle of each rope above the horizontal. For two pulled objects enter the force, its angle and both masses.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what to find, fill in the boxes that appear and press Calculate.

See full result

A tension calculator finds the pull in a rope, cable or string. It covers a load hanging from one rope, either still or speeding up or slowing down, a load hung from two ropes at any angles, and the rope between two objects that are pulled along a smooth surface. Choose your units, pick the case and read the tension in newtons and pounds-force.

How to use the tension calculator

  1. Choose US or metric units.
  2. Pick the case you need.
  3. Fill in the boxes that appear.
  4. Press Calculate.

What tension is

Tension is the pulling or stretching force that is transmitted along an object such as a rope, a string or a cable [1]. The article on the subject adds that, if the string has no bends, the tension is the same along its whole length and equals the force applied by its ends [1]. This is why one number describes a whole rope. The calculator gives that number for three common situations, all of which come from balancing forces.

A load hanging still

For a load that hangs in equilibrium from a single rope, the forces balance, so the tension equals the weight: T = W [1]. The weight is the mass times the acceleration of gravity, W = m g. The calculator uses the standard value of 9.80665 metres per second squared, about 32.17405 feet per second squared [3]. A 10 kilogram load therefore pulls on its rope with 98.066 newtons, or about 22 pounds-force.

A load that accelerates

If the load speeds up while it is lifted, the rope must carry its weight and also supply the extra force. With the acceleration a taken as positive upward, Newton's second law gives T = m (g + a). This step is our own working from Newton's second law, which says the net force equals mass times acceleration [2]. For 10 kilograms with a = 2 metres per second squared, the tension is 118.07 newtons. If the load accelerates downward at 2, it is 78.066 newtons, which is less than the weight.

Two ropes at angles

When a load hangs from two ropes at angles α and β above the horizontal, the vertical forces balance, W = T₁ sin α + T₂ sin β, and the horizontal forces balance, T₁ cos α = T₂ cos β. These balances follow from a body at rest having zero net force [2]. Solving them gives T₁ = W cos β ÷ sin(α + β) and T₂ = W cos α ÷ sin(α + β), which is our own rearrangement. Enter the two angles and the mass and the calculator gives both tensions.

Equal angles

If both ropes make the same angle α, the balance becomes 2 T sin α = m g, so each rope carries T = m g ÷ (2 sin α). A 10 kilogram box on two ropes at 60 degrees has a tension of 56.619 newtons in each rope. Using a rounded value of g near 9.8 gives about 56.58 newtons, while the calculator uses the standard 9.80665 [3]. The difference is the choice of g, not a different method.

Why flat ropes pull hard

A small angle makes the tension large. At 60 degrees each rope carries a little more than half of the weight, but at 30 degrees each carries exactly the whole weight, 98.066 newtons for 10 kilograms. At 10 degrees it is 282.37 newtons, nearly three times the weight. This is why a clothesline or a cable with a load in its middle needs strong anchors, and why it can never be pulled perfectly straight.

Two objects pulled along

The third case is two objects joined by a rope and pulled over a frictionless surface by a force F at an angle θ to the horizontal. The horizontal part is F cos θ, the common acceleration is that divided by the total mass, and the rope between the objects gives T = a m₂ to the trailing object, by Newton's second law applied to that object [2]. For 24 newtons at 60 degrees on 3 and 2 kilograms, the acceleration is 2.4 metres per second squared and the rope tension is 4.8 newtons.

Units and conversions

In US mode you enter pounds, feet per second squared and pounds-force. The calculator converts masses at 0.45359237 kilograms per pound and accelerations at 0.3048 metres per foot, which are exact definitions and our own working, then shows each result in newtons and in pounds-force. Metric mode takes kilograms, metres per second squared and newtons. The two modes give the same physical answer for the same load.

Limits and safety

The rope is assumed to be weightless, inextensible and straight between its ends, and the surface for the pulled objects has no friction. Real ropes sag, stretch and weaken at knots, and a load that swings or jerks can multiply the tension. The result is an educational estimate. For lifting, rigging or climbing, use the rated working load of the equipment, include a safety factor and ask a qualified person.

Checking a result by hand

You can test the calculator with a simple example. A 10 kilogram box hung from two ropes at 60 degrees has a weight of 98.066 newtons with the standard value of g [3], and the balance 2 T sin 60° = 98.066 gives T = 56.619 newtons for each rope. For the pulled objects, 24 newtons at 60 degrees has a horizontal part of 12 newtons, a = 12 ÷ 5 = 2.4 metres per second squared, and the rope to the 2 kilogram object carries 2.4 × 2 = 4.8 newtons [2]. If your own answer is close, the setup is right.

Common mistakes

  • Using the wrong angle. The angle is measured from the horizontal, not from the vertical.
  • Forgetting the acceleration. A load that speeds up upward pulls harder than its weight.
  • Mixing up mass and force. Enter the mass of the load, not its weight.
  • Trusting a flat rope. A nearly horizontal rope can carry a huge tension.

What next

Use this often? Add Tension to your Home screen.

Frequently asked questions

What is a tension calculator?

A tool that finds the pull in a rope, string or cable for a hanging, accelerating or pulled load.

What is the tension in a rope holding a still load?

It equals the weight of the load, T = m g.

How do you find the tension when the load accelerates?

Use T = m (g + a), with a positive upward.

Why does a flatter rope carry more tension?

Each rope has to supply the vertical force through a smaller vertical share, so 2 T sin α = m g needs a larger T as the angle falls.

Can I use it to choose a rope for lifting?

No. It is an educational estimate; use rated equipment with a safety factor.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools