Saved

Press the star next to a tool's name to save it.

All my tools

Stopping Distance Calculator

Use this stopping distance calculator to add the reaction distance and the braking distance of a car from its speed, the reaction time, the friction and the road grade.

Restored your last values ·

s
%

Choose US or metric units. Enter the speed, the driver's reaction time and the tyre-road friction coefficient, and optionally the grade. You get the reaction distance, the braking distance and the total.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the speed, the reaction time and the friction coefficient, then press Calculate.

See full result

A stopping distance calculator adds the distance a car travels while the driver reacts to the distance it needs to brake to a halt. Enter the speed, the reaction time and the friction between tyres and road, plus the road grade if you like, and it returns the total with its two parts.

How to use the stopping distance calculator

  1. Choose US or metric units.
  2. Enter the speed and the reaction time.
  3. Enter the friction coefficient and, if the road slopes, the grade.
  4. Press Calculate.

Two parts of a stop

Wikipedia says the total stopping distance is the sum of the perception-reaction distance and the braking distance [1]. The first part is the ground covered before the brakes are even applied, while the driver notices the hazard and decides to act. The second is the ground covered while the brakes slow the car to rest. Both grow with speed, but at very different rates, which is why speed has such a strong effect on how far a car needs to stop.

Reaction distance

The reaction distance is the product of the speed and the perception-reaction time of the driver [1]. At 120 km/h, or 33.33 m/s, and a reaction time of 1.5 s, the car travels 50 m before braking starts. Doubling the speed doubles this part, and so does a doubled reaction time. The tool takes the reaction time in seconds, so you can try a faster driver or a tired or distracted one.

Braking distance

The braking distance on the same page is d = v² ÷ (2 μ g), found by setting the work done by friction equal to the kinetic energy, with μ the friction coefficient between road and tyres and g the gravity of Earth [1]. The tool uses g = 9.80665 m/s². Because the speed is squared, doubling it makes the braking distance four times as long. This is the main reason that small speed reductions give a big safety gain.

The total formula

Putting the two together, D = v t + v² ÷ (2 μ g) [1]. Road designers write the same idea as the stopping sight distance, with a reaction term of 0.278 t v for speed v in km/h [2]. Adding a grade G to the friction coefficient f in the braking term gives s = 0.278 t v + v² ÷ (254 (f + G)), which is our own working from the energy equation. The tool works in metres per second internally, so the constants 0.278 and 254 are not needed, and its answers agree with that form.

Friction values

The Wikipedia page gives a baseline of 1.5 s and μ = 0.7 for stopping distance charts, says a modern anti-skid car may reach 0.9, and says wet or frozen asphalt may have 0.25 or lower [1]. Pick the value that matches your surface, and use a smaller number for ice, snow or worn tyres.

Reaction times

The Wikipedia page notes that keen drivers can react in well under a second, while elderly, impaired or distracted drivers can take up to 2.5 seconds [1]. Road design uses a perception-reaction time of 2.5 s [2], while a baseline of 1.5 s is common in stopping distance charts [1]. The tool does not guess for you: type the time you want to test.

Road grade

A slope changes the braking part. The incline of the road affects the braking distance [2]. This tool adds the grade G to the friction coefficient, positive uphill and negative downhill, entering the grade as a percentage, and uses braking distance v² ÷ (2 g (μ + G)). This form is our own working from the energy equation. On a steep enough downhill with poor friction the sum becomes zero or negative, the car cannot stop by friction alone, and the tool says so.

A worked example

Take 120 km/h, a 1.5 s reaction time, a flat road and f = 0.27. The tool gives 259.8 m: 50 m of reaction distance and 209.8 m of braking. With the Wikipedia baseline μ = 0.7 at the same speed, the total drops to 130.9 m, made up of 50 m and 80.93 m. These two results show the large effect of a slippery road.

US and metric

Choose US to enter the speed in miles per hour: the tool converts it with 0.44704 m/s per mph and shows distances in feet first and metres in brackets. Choose metric to enter kilometres per hour, converted by dividing by 3.6, with metres first. The calculation is the same in both, and the results can be checked against each other, since 1 m equals 3.2808 ft. Keep the friction coefficient and the reaction time as plain numbers.

Limits and a safe gap

The Wikipedia page says that most people can stop slightly sooner under ideal conditions, and that the friction coefficient falls as the mass of the car rises [1]. Road designers use stopping sight distance with more cautious values. The result here is a simple estimate, not a legal or engineering figure. Use it to understand how speed and distraction add up, and keep a gap that is longer than the answer for your speed.

Common mistakes

  • Using the speed in the wrong unit. Check the US or metric choice.
  • Taking a dry road friction value on a wet road. Use a lower coefficient.
  • Forgetting the reaction time. It can be half of the total at city speeds.
  • Ignoring a downhill grade. It lengthens the braking part.

What next

Use this often? Add Stopping Dis to your Home screen.

Frequently asked questions

What is a stopping distance calculator?

A tool that adds the distance covered during the driver's reaction to the distance needed to brake to a stop.

What is the stopping distance formula?

D = v t + v² ÷ (2 μ g): the speed times the reaction time, plus the braking distance.

Why does speed matter so much?

The braking distance grows with the square of the speed, so doubling the speed makes it four times longer.

What friction coefficient should I use?

About 0.7 for a dry road as a baseline, and 0.25 or lower on wet or frozen asphalt, since values vary.

Does a downhill road change the answer?

Yes, a downhill grade lengthens the braking distance and an uphill grade shortens it.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools