An SGPA calculator works out your semester grade point average from the courses you took that semester. Each course's grade point is multiplied by its credits, the results are added, and the total is divided by the number of credits, so bigger courses count for more. This is the method in the University Grants Commission (UGC) guidelines for the Choice Based Credit System, which many Indian universities follow.
How to use the SGPA calculator
- Add each course you took in the semester.
- Enter its credits, as listed in your syllabus or mark sheet.
- Choose the grade from the list; each letter shows its grade point.
- Press Calculate SGPA to see your SGPA, with each course's credit points shown in the table.
SGPA formula
SGPA = Σ(Ci × Gi) ÷ ΣCi
Here Ci is the number of credits of course i and Gi is the grade point you scored in it. The UGC guidelines say SGPA and CGPA are rounded off to two decimal places, and the calculator does the same.
UGC grade points
| Letter grade | Grade point |
|---|---|
| O (Outstanding) | 10 |
| A+ | 9 |
| A | 8 |
| B+ | 7 |
| B | 6 |
| C | 5 |
| P (Pass) | 4 |
| F (Fail) | 0 |
Some universities use other letters or points. If yours does, choose the option with the same grade point as your mark sheet.
Worked example
A student takes five courses: Mathematics (4 credits, A = 8), Physics (3 credits, B+ = 7), Chemistry (3 credits, O = 10), English (2 credits, A+ = 9) and a lab (2 credits, B = 6). The credit points are 32 + 21 + 30 + 18 + 12 = 113, over 14 credits, so the SGPA is 113 ÷ 14 = 8.07. The calculator’s placeholders show this example; type in your own courses and press Calculate SGPA to work out yours.
Common mistakes to avoid
- Averaging grade points without credits. A simple average treats a 2-credit lab the same as a 4-credit course, which gives the wrong SGPA.
- Using marks instead of grade points. Convert each course to its letter grade or grade point first, using your university's grading table.
- Leaving out a course. Include every course with credits in the semester, including labs and projects, unless your university says otherwise.
- Rounding too early. Add the full credit points first, and round only the final SGPA to two decimals.
SGPA and CGPA
SGPA covers one semester. CGPA (cumulative grade point average) combines all your semesters, weighting each SGPA by that semester's credits. Once you have your SGPAs, use the CGPA calculator, and to turn a CGPA into a percentage, the CGPA to percentage converter.
What a credit means
Credits tell you how much a course counts. The UGC guidelines define one credit as one hour of teaching, lecture or tutorial, or two hours of practical or field work per week.[1] So a 4-credit theory course usually means four hours of lectures a week, and a 2-credit lab can mean four hours in the lab. The guidelines call the product of a course’s grade point and its credits the credit point.[1] Your SGPA is the total of those credit points divided by the total credits for the semester.
Worked example from the UGC guidelines
The UGC guidelines include their own illustration with six courses and 20 credits in all.[1] You can enter it in the calculator to check it gives the same answer:
| Course | Credits | Grade | Credit points |
|---|---|---|---|
| Course 1 | 3 | A (8) | 24 |
| Course 2 | 4 | B+ (7) | 28 |
| Course 3 | 3 | B (6) | 18 |
| Course 4 | 3 | O (10) | 30 |
| Course 5 | 3 | C (5) | 15 |
| Course 6 | 4 | B (6) | 24 |
The credit points add up to 139, so the SGPA is 139 ÷ 20 = 6.95, the same figure the guidelines show.[1] The calculator’s result line reads “139 credit points ÷ 20 credits = 6.95”, and the table lists each course as credits × grade point = credit points.
Which grade moves your SGPA most?
Because credits act as weights, one grade step on a big course moves your SGPA more than the same step on a small one. Start from the five-course example above, with an SGPA of 8.07 over 14 credits:
- Mathematics (4 credits) up from A to A+: 8.36
- Physics (3 credits) up from B+ to A: 8.29
- Lab (2 credits) up from B to B+: 8.21
Each one-point rise adds the course’s credits to the total credit points, so it lifts the SGPA by the credits divided by 14. When you plan your study time, the courses with the most credits matter most.
How F and Ab grades count
In the UGC table, both F (Fail) and Ab (Absent) carry 0 grade points, and a student with an F has to reappear in the examination.[1] The calculator treats both as 0 and keeps their credits in the total, which pulls the SGPA down. In the five-course example, an F in the 3-credit Chemistry course instead of an O drops the SGPA from 8.07 to 5.93. Non-credit courses are marked Satisfactory or Unsatisfactory and don’t count toward SGPA or CGPA, so leave them out.[1] Some universities handle failed courses differently after a re-exam, so check your own rules.
Entering grades and credits
- Letters or grade points. Type O, A+, A, B+, B, C, P, F or Ab, in capitals or small letters, or type the grade point from 0 to 10, such as 7.5, if your mark sheet uses one.
- Marks are rejected. A number above 10, such as 78, isn’t a grade point, so the calculator asks you to fix it.
- Credits. Each course needs credits greater than 0. Decimal credits such as 1.5 are fine.
- Up to 20 courses. Use Add course for extra rows, and remove any you don’t need.
The UGC leaves it to each university to decide the marks needed to pass and the cut-offs for each grade.[1] Convert your marks with your own university’s table first.
From SGPA to CGPA: the UGC example
The same guidelines show a CGPA over six semesters with 20, 22, 25, 26, 26 and 25 credits and SGPAs of 6.9, 7.8, 5.6, 6.0, 6.3 and 8.0.[1] Each SGPA is multiplied by its semester’s credits, the results add up to 969.4, and dividing by the 144 total credits gives a CGPA of 6.73.[1]
What next
Use this often? Add SGPA to your Home screen.
Frequently asked questions
How do I use the SGPA calculator?
Enter the credits and grade for each course in the semester. The SGPA is the total credit points divided by the total credits.
What is the difference between SGPA and CGPA?
SGPA is the grade point average for one semester. CGPA combines all semesters, weighted by their credits.
What grade point is an A+?
On the UGC 10-point scale, A+ is 9, O is 10, A is 8 and B+ is 7.
Does a failed course count in SGPA?
An F has 0 grade points. Whether its credits count in the total depends on your university’s rules, so check your mark sheet.
How many hours is one credit?
Under the UGC guidelines, one credit is one hour of lecture or tutorial, or two hours of practical or field work, per week.
Can I type grade points instead of letters?
Yes. Type the grade point from your mark sheet, from 0 to 10, such as 8 or 7.5. Letters O, A+, A, B+, B, C, P, F and Ab also work.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.