Saved

Press the star next to a tool's name to save it.

All my tools

GPA Calculator

Enter your grades and credits to see your GPA on a 4.0 scale. Add your earlier GPA and credits to see your cumulative GPA.

Restored your last values ·

Uses a standard 4.0 scale. Your result opens on the next page.

Your GPA

3.44

Enter your grades and credits to see your GPA.

See full result

How GPA is calculated

Each letter grade has a point value. Multiply those points by the course’s credits to get quality points, add them all up, then divide by the total credits.

GPA = total quality points ÷ total credits

Worked example

Suppose you earned an A in a 3-credit course, a B+ in a 3-credit course, a B in a 4-credit course and an A− in a 2-credit course.

GradePointsCreditsQuality points
A4.0312.0
B+3.339.9
B3.0412.0
A−3.727.4

That’s 41.3 quality points over 12 credits, and 41.3 ÷ 12 = 3.44.

The 4.0 grade scale

GradePointsGradePoints
A4.0C2.0
A−3.7C−1.7
B+3.3D+1.3
B3.0D1.0
B−2.7D−0.7
C+2.3F0.0

Some schools give an A+ more than 4.0, or leave out the plus and minus grades. High schools may also weight honors and AP classes, which this calculator doesn’t do.

Cumulative GPA

To include earlier terms, enter your GPA so far and the credits behind it. For example, a 3.2 GPA over 30 credits plus the 3.44 term above comes to a cumulative GPA of 3.27.

Converting GPA to a percentage

There’s no universal formula. This calculator shows GPA ÷ 4 × 100 as a rough guide, so a 3.44 is about 86%. Schools and countries use their own conversions, so if an application asks for a percentage, use the method it gives.

How to use the GPA calculator

  1. Pick a grade for each course. The Grade list runs from A (4.0) down to F (0.0), with the plus and minus grades in between.
  2. Enter the credits. Type the credits or units for each course. A course can have 0 to 30 credits, and at least one course needs more than 0.
  3. Add or remove courses. Use Add a course for each extra class, up to 20, and Remove course for any you don’t need.
  4. Add your record so far (optional). Enter your GPA so far and your credits so far to get a cumulative GPA. Fill in both boxes or leave both blank.
  5. Press Calculate GPA. Your result opens on the next page.

The form starts with the four courses from the worked example, so you can see how it works before you type your own grades.

How to read your GPA result

The large figure is your GPA for the courses you entered, to two decimal places. Below it, a table shows your credits this term, your quality points and an approximate percentage. If you filled in your GPA and credits so far, the table also starts with your cumulative GPA. The percentage is only GPA ÷ 4 × 100, a rough guide rather than an official figure.

Worked example: one term and a cumulative GPA

A student has a 2.8 GPA over 45 credits and takes four 3-credit courses this term, earning an A, an A−, a B+ and a B.

  • Quality points this term: 12 + 11.1 + 9.9 + 9 = 42
  • Term GPA: 42 ÷ 12 = 3.50, shown as about 87.5%
  • Points so far: 2.8 × 45 = 126
  • Cumulative GPA: (126 + 42) ÷ (45 + 12) = 168 ÷ 57 = 2.95

A strong term lifts the cumulative GPA, but not all the way to 3.50, because the 45 earlier credits still count. The more credits you have behind you, the less one term moves the total. With 90 earlier credits at 3.0, a 15-credit term of straight A grades takes the cumulative GPA only to 3.14. With 30 earlier credits, the same term would give 3.33.

How one university sets its grade points

Each school publishes its own grading rules, so it helps to see a real example. At UC Berkeley, an A+ and an A both carry 4.0 grade points per unit, and an A− carries 3.7.[2] B+, B and B− are 3.3, 3.0 and 2.7, and the C and D grades follow the same steps down to a D− at 0.7.[2] That matches the scale this calculator uses. An F is 0.0, and its units are still included when the GPA is worked out.[2] So an F pulls your GPA down, and you should enter it with its credits.

Berkeley’s grades P, S, NP, U, I and IP carry no grade points, and the units in those courses are left out of the GPA.[2] If your school works the same way, leave pass/no pass and incomplete courses out of the calculator, and leave their credits out of your credits so far too.

Repeated courses

Retaking a class can change how your GPA is worked out. At Berkeley, a course may be repeated only after a D+, D, D−, F or a no pass grade.[2] After a repeat, both grades appear on the transcript, but only the most recent grade is counted in the GPA, for the first 12 graded units of repeated courses.[2] If your school has a rule like this, enter only the new grade. Then take the old grade’s quality points and credits out of the GPA and credits you enter as your record so far, or use the cumulative GPA on your transcript.

Common GPA mistakes

  • Including pass/fail courses. They usually carry no grade points, so leave them out.
  • Using total credits for your record so far. Enter only the graded credits behind your GPA, not every credit you have earned.
  • Expecting a 4.3 for an A+. This calculator counts an A+ as an A, at 4.0. If your school gives more, your official GPA may differ.
  • Treating the percentage as official. The percentage is a rough guide; applications that ask for one usually give their own method.

What next

Use this often? Add GPA to your Home screen.

Frequently asked questions

How do I calculate my GPA?

Multiply each grade’s points by the course credits, add the results, then divide by your total credits.

How do I convert GPA to a percentage?

A rough guide is GPA ÷ 4 × 100, so a 3.5 is about 87.5%. There’s no universal formula, so use your school’s own method if it has one.

How do I calculate my cumulative GPA?

Multiply your earlier GPA by its credits, add this term’s quality points, then divide by all your credits. The calculator does this when you enter your earlier GPA and credits.

Is this the same as my official GPA?

Not always. Schools set their own rules for things like A+ grades, repeated courses and pass/fail classes, so your transcript has your official GPA.

Do pass/fail courses count in my GPA?

Usually not. At UC Berkeley, for example, P, NP and similar grades carry no grade points and their units are left out of the GPA. Leave such courses out of the calculator, and check your own school’s rules.

What happens to my GPA if I repeat a course?

It depends on your school. At UC Berkeley, both grades show on the transcript but only the most recent counts in the GPA, within limits. In the calculator, enter only the grade that counts.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Education Tools