A CGPA calculator turns your semester results into one overall figure. Your CGPA (cumulative grade point average) is the average of your SGPAs, with each semester counted by its credits, which is how the University Grants Commission (UGC) sets it out for the Choice Based Credit System. Enter each semester's SGPA and credits, and this CGPA calculator shows the result and every step.
CGPA formula
CGPA = Σ(Ci × Si) ÷ ΣCi
Si = SGPA of semester i, Ci = total credits in that semester
The UGC guidelines say SGPA and CGPA are rounded off to two decimal places and reported in the transcript, so the calculator does the same.
How to use the CGPA calculator
- Choose the scale. Most Indian universities use the 10-point scale; pick 4-point if yours does.
- Add each semester. Enter its SGPA from your mark sheet and the total credits for that semester.
- Read your CGPA. The table shows each semester's credit points, so you can check the sum.
Worked example from the UGC guidelines
The UGC's own illustration uses six semesters with 20, 22, 25, 26, 26 and 25 credits and SGPAs of 6.9, 7.8, 5.6, 6.0, 6.3 and 8.0. The credit points are 20 × 6.9 + 22 × 7.8 + 25 × 5.6 + 26 × 6.0 + 26 × 6.3 + 25 × 8.0 = 969.4. Divide by the 144 total credits and the CGPA is 6.73. Enter those figures above and you get the same answer.
Why credits matter
A semester with more credits carries more of your CGPA. In the example, the final semester's SGPA of 8.0 counts across 25 credits, while a smaller semester would count for less. If your university treats every semester equally, leave the credits empty and the calculator takes a simple average instead.
SGPA, CGPA and grade points
SGPA is worked out the same way within one semester: each course's grade point multiplied by its credits, added up and divided by the total credits. On the UGC 10-point scale, O (Outstanding) is 10, A+ is 9, A is 8, B+ is 7, B is 6, C is 5, P (Pass) is 4 and F is 0.
Turning CGPA into a percentage
Universities convert CGPA to a percentage in different ways, so use the formula on your mark sheet or your university's rules. Our CGPA to percentage converter shows the common methods. For a 4.0-scale GPA from letter grades, use the GPA calculator.
How to read your CGPA result
The large figure shows your CGPA out of the scale you chose, such as 6.73 / 10. Under it, a line gives the whole sum, for example 969.4 credit points ÷ 144 credits = 6.73. The table then lists each semester as SGPA × credits = credit points, such as 6.9 × 20 credits = 138. Semesters you named keep their names; the rest are numbered Semester 1, Semester 2 and so on. Add the credit points in the table and you get the figure in the sum line, which is a quick way to spot a typing mistake.
Planning the SGPA you need next semester
You can use the CGPA formula backward to see what a target asks of you. Take the first five semesters of the UGC example, with 20, 22, 25, 26 and 26 credits and SGPAs of 6.9, 7.8, 5.6, 6.0 and 6.3.[1] Entered on their own, they give 769.4 credit points over 119 credits, a CGPA of 6.47.
Now suppose the sixth semester has 25 credits and you want to finish on 7.00. You need 7 × 144 = 1,008 credit points in all, so the last semester must bring 1,008 − 769.4 = 238.6 points. Divide by its 25 credits and you need an SGPA of about 9.54. A target of 6.90 would need about 8.97 instead. The real result in the example, an SGPA of 8.0, lifts the CGPA from 6.47 to 6.73.
The calculator doesn’t solve for a target directly. Add the next semester with a trial SGPA, read the new CGPA, and change the SGPA until it reaches your goal.
Weighted CGPA vs a simple average
When you leave every credits box empty, the calculator takes a simple average of your SGPAs. For the six UGC semesters that gives (6.9 + 7.8 + 5.6 + 6.0 + 6.3 + 8.0) ÷ 6 = 6.77, a little above the credit-weighted 6.73. The simple average comes out higher here because the strongest semester, the last one, has fewer credits than two of the weaker ones. Use the weighted figure unless your university says each semester counts the same.
You can’t mix the two methods. If some semesters have credits and others don’t, the calculator asks you to give every semester its credits or leave them all empty.
Using the CGPA calculator on a 4-point scale
Switch the grading scale to 4-point if your grade cards use it. The method is the same: each SGPA is multiplied by its credits, the results are added and the total is divided by all the credits. For example, SGPAs of 3.2, 3.6 and 3.4 over 18, 20 and 22 credits give 57.6 + 72 + 74.8 = 204.4 credit points over 60 credits, a CGPA of 3.41. On this scale, any SGPA above 4 is flagged as an error.
Common CGPA mistakes
- Entering marks or percentages. The SGPA box takes a grade point average from 0 to the top of your scale, not a mark such as 78.
- Using running totals for credits. Enter the credits for that semester only, not the credits earned so far.
- Rounding each SGPA first. Type each SGPA exactly as your grade card shows it. The calculator rounds only the final CGPA, to two decimal places.
- Counting a semester twice. If you repeated a semester or cleared a backlog, follow your university’s rule on which result counts.
- Mixing scales. Don’t combine SGPAs from a 10-point and a 4-point scale in one calculation.
The UGC leaves the CGPA needed to qualify for a degree to each university, so check your own regulations for the figure you need.[1]
What next
Use this often? Add CGPA to your Home screen.
Frequently asked questions
How do I use a CGPA calculator?
Enter each semester's SGPA and credits. The calculator multiplies each SGPA by its credits, adds them and divides by the total credits.
What is the formula for CGPA?
CGPA = Σ(Ci × Si) ÷ ΣCi, where Si is each semester's SGPA and Ci its total credits, as set out in the UGC CBCS guidelines.
Is CGPA the average of SGPAs?
Only when every semester has the same credits. Otherwise each SGPA is weighted by its semester's credits.
How many decimal places should CGPA have?
The UGC guidelines say SGPA and CGPA are rounded off to two decimal places.
How do I find the SGPA I need for a target CGPA?
Multiply the target CGPA by the total credits including the next semester, subtract the credit points you already have, and divide by the next semester’s credits. Or add the next semester in the calculator with a trial SGPA and adjust it until the CGPA reaches your target.
Can I use the CGPA calculator on a 4-point scale?
Yes. Choose 4-point as the grading scale and enter SGPAs from 0 to 4. The credit-weighted method is the same as on the 10-point scale.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.