A rounds per minute calculator turns a number of rounds and the time they took into a rate. Enter how many rounds, shots or strokes there were and the time in minutes or seconds. You get rounds per minute, rounds per second and the time from one round to the next, and, if you add a number of rounds, how long they take.
How to use the rounds per minute calculator
- Enter the number of rounds.
- Enter the time taken and choose minutes or seconds.
- Add a number of rounds to time, if you want to know how long they would take.
- Press Calculate.
The formula
Rate of fire is usually measured in rounds per minute [1], which is the number of rounds fired divided by the time taken in minutes. Written as a formula, RPM = rounds ÷ minutes. It is a plain rate, like miles per hour, where the rounds play the part of the distance. The calculator uses exactly this and adds a few conversions.
A worked example
A simple example is 90 rounds in 1 minute, which gives 90 ÷ 1 = 90 rounds per minute. The calculator gives the same figure. If you measured the 90 rounds over 1 minute with a stopwatch, the rate is 90, and nothing else needs to be done. When the time is not a whole minute, the same division applies, as in the next examples.
Seconds instead of minutes
Short bursts are easier to time in seconds, so you can choose seconds. The time is divided by 60 to give minutes, and then the formula is used. If 45 rounds take 30 seconds, then the time is 0.5 minutes and the rate is 45 ÷ 0.5 = 90 rounds per minute, the same as in the first example. This conversion is our own working.
Rounds per second
Dividing the rate per minute by 60 gives the rate per second. A rate of 90 per minute is 1.5 per second, and a rate of 600 per minute is 10 per second. The figure per second is easier to picture, because it is a rhythm that you can count aloud. It is our own conversion.
Time between rounds
The time from one round to the next is the reciprocal of the rate per second. At 90 rounds per minute, it is 60 ÷ 90 = 0.66667 seconds, and at 600 per minute it is 0.1 seconds. This is useful when you need a delay or a metronome setting, or when you want to know whether a mechanism can keep up with a given rate. It is also our own arithmetic.
Time for a number of rounds
You can enter a number of rounds to find how long they take at the rate that was worked out. Thirty rounds at 90 per minute take 30 ÷ 90 = 0.33333 minutes, which is 20 seconds. One hundred rounds at 600 per minute take 10 seconds. The tool shows the time in seconds and in minutes, and the calculation is just the number of rounds divided by the rate.
Maximum and real rates
A cyclic rate is the maximum rate given only mechanical function, while a sustained rate is the maximum efficient rate given the time taken to load [1]. In practice, continuous fire at a high cyclic rate can damage a weapon, and machine guns are usually fired in short bursts [1]. Heat, jams and the skill of the person lower the real rate. This is true for any machine that cycles: a quoted rate is a limit. The calculator does not know about any of these effects. It works only with the numbers that you type, so a measured rate is more useful than a rated one.
Other uses
The rate formula does not care what is counted. The same calculation applies to the strokes of a nail gun, the shots of an airsoft or paintball marker, the balls fed by a pitching machine, the pages of a printer or the strokes of a pump. We use the word rounds because it is the usual term for rate of fire. Replace it with whatever you count, and the answer is a number of those per minute.
Safety
This is a calculator for arithmetic only. It does not give data on any firearm, and we deliberately do not list figures for particular weapons. If you work with a firearm or any other machine, follow the maker's instructions, local law and safe practice, and do not rely on a rate from a calculator. A cyclic rate is a theoretical limit, not a safe or sustainable one.
Using the calculator
Time a run with a stopwatch, count the rounds, and enter both. For a short run, use seconds. Repeat the measurement a few times and use the average, because a single run can be unrepresentative. Add a number of rounds if you want to plan a longer sequence. Compare the measured rate with the rated figure to see how far real use falls short of it.
Common mistakes
- Entering seconds as minutes. Check which unit is selected.
- Dividing minutes by rounds. The rate is rounds divided by minutes.
- Taking a rated figure as the real rate. Real rates are lower.
- Using a very short run. One short burst may not be representative.
What next
Use this often? Add Rounds per M to your Home screen.
Frequently asked questions
What is a rounds per minute calculator?
A tool that divides a number of rounds by the time taken to give a rate per minute.
What is the rounds per minute formula?
Rounds per minute equals the number of rounds divided by the time in minutes.
How do you work out the time between rounds?
Divide 60 by the rate in rounds per minute to get seconds per round.
Is the manufacturer's rate the real rate?
No. A quoted rate is a maximum under ideal conditions, and real use is usually lower.
Can I use it for things other than rounds?
Yes. It works for any count over time, such as strokes, shots or cycles.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.