An rms speed calculator finds the root mean square speed of the molecules of an ideal gas from its temperature and molar mass. It is the same job as a root mean square velocity calculator, and it also gives the average speed and the most probable speed.
How to use the rms speed calculator
- Choose US or Metric.
- Enter the temperature of the gas.
- Enter the molar mass in grams per mole.
- Press Calculate.
The formula
The RMS speed of the molecules of a gas is v_rms = √(3RT ÷ M), where R is the gas constant, T the temperature in kelvin and M the molar mass in kilograms per mole [1]. In terms of the mass m of one molecule the same law is √(3 kB T ÷ m) [2]. Replacing kB by R divided by Avogadro's number, and m by M divided by it, gives the molar form.
The gas constant
The calculator uses R = 8.314 J/(K·mol), the molar gas constant rounded to four digits. NIST lists it as 8.314462618… J/(K·mol) [3]. A more precise constant would shift the fifth digit of the results very slightly.
A worked example
Take oxygen at 27 °C. That is 300.15 K, and M = 0.032 kg/mol. The RMS speed is √(3 × 8.314 × 300.15 ÷ 0.032) = 483.68 m/s, the average speed is 445.6 m/s and the most probable speed is 394.9 m/s. Enter 27 in Metric, or 80.6 in US, with 32 g/mol and you will see the same figures here.
Average and most probable speeds
The average speed is √(8RT ÷ (πM)) [1]. The third speed is the most probable speed, √(2RT ÷ M), the speed at the peak of the distribution [1]. The RMS speed is always the largest of the three [1], which you can see in the results.
What RMS means
The root mean square is the square root of the arithmetic mean of the squares of the values. For molecules it is the square root of the average of the squared speeds. The RMS speed is related to the average kinetic energy of a molecule, which is 3/2 kB T [2]. That link is why the temperature, and not the pressure, appears in the formula.
What it depends on
The speed depends only on the temperature and the molar mass, not on the pressure or the volume [1]. Hot gases move faster, and heavy molecules move slower. At the same temperature, hydrogen molecules are four times as fast as oxygen ones, since the speed goes as the inverse square root of the molar mass and the masses are 2 and 32.
Another worked example
Take carbon dioxide at 40 °C: 313.15 K and 0.04401 kg/mol give about 421.3 m/s. Enter 40 and 44.01 in Metric to check. Carbon dioxide is heavier than oxygen, and yet it is hotter in the example, which is why the figure is lower but not by a large amount. Try two temperatures to see how the speed grows with the square root of T.
Units and conversions
The result is shown in metres per second, and also in miles per hour in US mode or kilometres per hour in Metric mode. A mile per hour is 0.44704 m/s exactly. The Fahrenheit temperature is changed to kelvin with K = (°F − 32) × 5/9 + 273.15. The calculator rejects any temperature that is at or below absolute zero.
Limits of the ideal gas model
The formula is for an ideal gas, whose molecules do not interact. At normal temperatures and pressures it is very good for air and for most simple gases, and it gets worse at high pressure or near the point of liquefaction. The RMS speed is not the speed of any one molecule: individual molecules move at a wide range of speeds, and the RMS figure is a typical value of that spread.
Reading the three speeds
For oxygen at 27 °C, the most probable speed of 394.9 m/s is below the average of 445.6 m/s, which is below the RMS of 483.7 m/s [1]. The three differ because the spread of molecular speeds is not symmetrical. The RMS figure weights the fast molecules most heavily, since the speeds are squared first. It is the one that links directly to the kinetic energy.
Choosing the gas
To use the tool, look up the molar mass of the gas in grams per mole, or compute it with our molar mass calculator. Oxygen is 32, hydrogen is 2 and carbon dioxide is 44.01. Mixtures such as air can be given an average molar mass, which is an approximation of our own, since the formula is derived for one kind of molecule at a time.
Comparing hydrogen with oxygen
Here is an example of our own, using the formula above. Hydrogen gas, with M = 2 grams per mole, at 27 °C (300.15 K) has an RMS speed of √(3 × 8.314 × 300.15 ÷ 0.002) = 1,934.7 metres per second [1]. Oxygen at the same temperature has 483.68 metres per second, so the ratio is 4.0, as predicted since the molar mass is 16 times larger. Raising the temperature of oxygen to 327 °C, which is 600.15 K, makes the speed 683.9 metres per second, a factor of 1.414, the square root of 2. Notice that doubling the absolute temperature raises the speed only by a factor of about 1.41, not by 2, and that this is why lighter gases escape from a warm atmosphere far faster than heavy ones.
Common mistakes
- Using kilograms per mole. The box takes grams per mole, and the calculator divides by 1,000.
- Using Celsius in the formula. The temperature must be in kelvin, which the calculator handles.
- Confusing RMS with the average speed. RMS is always the larger.
- Expecting pressure to matter. It does not.
What next
Use this often? Add RMS Speed to your Home screen.
Frequently asked questions
What is an rms speed calculator?
A tool that finds the root mean square speed of gas molecules from temperature and molar mass.
What is the RMS speed formula?
v_rms = √(3RT ÷ M), with R = 8.314 J/(K·mol), T in kelvin and M in kg/mol.
What is the RMS speed of oxygen at 27 °C?
About 483.68 m/s, from M = 0.032 kg/mol and T = 300.15 K.
Does the RMS speed depend on pressure?
No, only on the temperature and the molar mass.
Is this a root mean square velocity calculator too?
Yes, the root mean square velocity of a gas is the same number as its RMS speed.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.