Saved

Press the star next to a tool's name to save it.

All my tools

Recoil Energy Calculator

Use this recoil energy calculator to estimate the free recoil velocity, energy and impulse of a firearm from the bullet, powder charge and gun mass, or a bullet's muzzle velocity.

Restored your last values ·

Choose US or metric units. For recoil, enter the bullet mass and velocity, the powder charge if you know it, and the firearm mass. For muzzle velocity, enter the bullet mass and its kinetic energy.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what to find, fill in the boxes that appear, then press Calculate.

See full result

A recoil energy calculator estimates how fast a firearm kicks back when it fires, and how much energy and impulse that carries. Enter the bullet and powder charge and the mass of the gun. It can also find the muzzle velocity of a bullet from its energy.

How to use the recoil energy calculator

  1. Choose US or metric units.
  2. Choose recoil or muzzle velocity.
  3. Enter the bullet, the powder charge and the firearm mass, or the bullet's energy.
  4. Press Calculate.

Momentum and recoil

When a gun fires, the bullet and the expanding powder gases go forward and the gun goes back. The recoil velocity is the momentum of the bullet and the powder charge divided by the mass of the firearm. This is the conservation of momentum applied to free recoil, with the gun treated as unsupported [1]. Wikipedia says the firearm's momentum is equal and opposite to that of the projectile, and it adds the ejected propellant gas to the forward momentum [1].

The formulas

The recoil velocity is Vf = (Mb Vb + Mc Vc) ÷ (1000 Mf), with the bullet and charge masses in grams, the firearm mass in kilograms and the velocities in metres per second; the 1000 converts grams to kilograms. This is momentum conservation as above [1]. The recoil energy is Er = ½ Mf Vf², from the kinetic energy formula [2], and the impulse is Ir = Mf Vf, the momentum of the gun [1]. The calculator applies these and converts US units for you.

A worked example

As an example, take a rifle firing a 7.62×51 mm round: a 10.1 gram bullet at 845 metres per second, a 3.1 gram charge at 1,574.8 metres per second, and a 4.5 kilogram rifle. The calculator gives a recoil velocity of 2.98 metres per second, a recoil energy of 20 joules and an impulse of 13.4 newton seconds.

The powder gas velocity

The tool offers typical powder gas velocities: 1,707 metres per second for handguns and shotguns, 1,585 for rifles, 1,433 for BMG rounds and 685.8 for black powder. These are the tool's own averaged planning values, not specific to a propellant. Wikipedia says the ejected gas can be treated as having an effective exit velocity of α times the muzzle velocity, with α generally taken between 1.25 and 1.75 [1]. You can choose a preset, or enter your own velocity, such as the 1,574.8 in the example above.

The powder charge mass

The powder charge mass is an input that you take from your load data. We treat it as optional. If you leave it blank, the tool uses the bullet alone and says so, which gives a lower recoil. Add the charge from your load data if you want the full figure.

Muzzle velocity from energy

Solving the kinetic energy formula KE = ½ m v² for the speed gives v = √(2 × KE ÷ m), where KE is the bullet's kinetic energy and m its mass [2]. As an example, a 5.56 round of 1,300 foot-pounds and 55 grains is about 1,760 joules and 3.56 grams, which gives about 995 metres per second or 3,260 feet per second. The calculator gives 994.5 and 3,263.

Unit conversions

In US mode we convert grains with 1 grain = 0.06479891 grams, feet with 1 foot = 0.3048 metres, pounds with 1 pound = 0.45359237 kilograms and foot-pounds with 1 ft·lbf = 1.3558179 joules. These are standard factors and our own addition. They give 1,300 ft·lbf ≈ 1,760 J and 55 gr ≈ 3.56 g, the figures used in the example above.

Units of the firearm mass

In the formulas above, the bullet and charge are in grams and the firearm is in kilograms. In US mode you enter grains and pounds, and the tool converts them.

Recoil is not felt recoil

The result is free recoil: the gun is unsupported and nothing holds it. A shooter's body, a stock, a muzzle brake or a gas system changes how recoil is felt. The tool does not model them. Heavier guns recoil more slowly: with the same load, doubling the gun's mass halves the velocity and the energy halves too. Do not use the result to choose loads.

Using the tool

For recoil, enter the bullet mass and speed, the gun's mass and, if you know it, the powder charge. Read the velocity, the energy and the impulse. For muzzle velocity, enter the bullet mass and its energy. Always follow the rules of the load data and of your range for safety, and do not make or alter ammunition on the basis of this page.

Reading the three results

The recoil velocity is how fast the free gun moves backward just after firing, shown in metres and feet per second. The recoil energy is the kinetic energy of that motion, in joules and foot-pounds. The impulse is the momentum, in newton seconds, which equals the forward momentum of the bullet and the gases [1]. All three follow from the same masses and speeds, so the tool shows them together.

Why the gas matters

The powder gases leave the barrel at high speed and add to the momentum that the gun must balance. In the M14 example, the charge adds about 4,882 gram metres per second to the bullet's 8,534, about 36 percent of the total momentum. This is why leaving out the charge gives a lower, less realistic result [1].

Common mistakes

  • Leaving out the powder charge. It adds to the recoil.
  • Mixing grams and grains. Check the units switch.
  • Using the result as felt recoil. It is free recoil.
  • Using it to choose a load. Follow load data.

What next

Use this often? Add Recoil Energ to your Home screen.

Frequently asked questions

What is a recoil energy calculator?

A tool that estimates the free recoil velocity, energy and impulse of a firearm from the bullet, the powder charge and the mass of the gun.

What is the recoil energy formula?

Er = ½ Mf Vf², with the recoil velocity Vf found from the momentum of the bullet and the powder charge divided by the gun mass.

How is muzzle velocity found from energy?

v = √(2 × KE ÷ m), with the bullet's kinetic energy and mass in consistent units.

Why does a heavier gun recoil less?

The same momentum is shared over more mass, so the recoil velocity and energy are lower.

Is this the recoil I will feel?

No. It is free recoil of an unsupported gun, not felt recoil.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools