Saved

Press the star next to a tool's name to save it.

All my tools

Rainfall Volume Calculator

Use this rainfall volume calculator to turn a depth of rain over an area into litres, cubic metres and gallons, with a collection efficiency for a rain barrel or tank.

Restored your last values ·

Choose US or metric units, enter the area and the depth of rain, and add a collection efficiency if you are catching the water from a roof. You get the volume in litres, cubic metres and US gallons.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the area and the rainfall, then press Calculate.

See full result

A rainfall volume calculator turns a depth of rain over an area into a volume of water. Enter the area, such as a roof or a field, and the depth of rain, and it gives the volume in litres, cubic metres and gallons. It is useful for rain barrels, tanks, drainage and irrigation planning.

How to use the rainfall volume calculator

  1. Choose US or metric units.
  2. Enter the area and the rainfall depth.
  3. Add a collection efficiency if you are catching the rain.
  4. Press Calculate.

A millimetre is a litre

Rain gauges measure precipitation as the depth of water collected over a period, in millimetres, which is equivalent to litres per square metre [1]. So one millimetre of rain on one square metre of surface is one litre of water. The same page notes that rain was once recorded in inches or points, where one point is 0.254 millimetres, or 0.01 of an inch [1]. This is the key fact behind the calculator.

The formula

The volume of rain is the area times the depth. In metric units the area in square metres times the depth in millimetres gives the volume in litres. A roof of 100 square metres that receives 10 millimetres of rain gets 1,000 litres, which is one cubic metre. The page describes depth as the depth of precipitation that occurs over a unit area [1], and the multiplication is our own working.

US units

In US units, the calculator converts the area from square feet to square inches by multiplying by 144, multiplies by the depth in inches to get cubic inches, and converts to litres, using 16.387064 millilitres per cubic inch. A US gallon is exactly 231 cubic inches, which is 3.785411784 litres [2]. One inch of rain on 1,000 square feet is 144,000 cubic inches, which is 2,359.74 litres or 623.4 gallons.

Collection efficiency

Not all the rain that falls on a roof ends up in your tank. Some splashes off, some is lost in the gutters and the first flush of dirty water is often diverted. The efficiency box lets you allow for it. At 80 percent, the 1,000 litres from the example becomes 800. The pages that we read give no typical figure, so choose one for your roof and gutters, and check it against what you collect.

Rain barrels and tanks

Use the result to size a tank. A roof of 100 square metres in a region that receives 600 millimetres of rain a year can catch up to 60,000 litres in a year, before losses. A tank of 5,000 litres fills after about 50 millimetres of rain on that roof, again before losses. These examples are our own calculations. Tanks overflow in a heavy storm, so the capacity should match the storms that you expect.

Drainage and runoff

The same multiplication gives the volume of water that a drain or a soakaway has to handle. A car park of 500 square metres in a storm of 20 millimetres produces 10,000 litres, which is 10 cubic metres. Drains are sized for a rate of flow, which depends on how quickly the rain falls, and not only on the volume, so use the calculator as the first step in a design and not the last.

Irrigation and gardens

Gardeners can use the calculator to judge how much water a lawn or a field gets from a rain event. A garden of 200 square feet that receives half an inch of rain gets 100 square feet-inches, which is about 62 gallons. To replace the water that a crop needs, convert the need in inches or millimetres to a volume in the same way, and compare.

Using the calculator

Measure the horizontal area that the rain falls on, which for a sloping roof is the area of its footprint and not the sloping surface. Use the rain depth from a gauge or from the weather record. Enter the efficiency if you are collecting the water, and press the button. The working line shows the steps, so you can check them by hand.

Worked examples

A roof of 150 square metres that receives 25 millimetres of rain collects 3,750 litres. With an efficiency of 80 percent, the tank gets 3,000 litres. In US units, a roof of 30 feet by 40 feet, which is 1,200 square feet, in a storm of 2 inches gets 345,600 cubic inches of water, which is 1,496 gallons or about 5,663 litres. These are our own calculations from the formula above.

Inches and millimetres

An inch is 25.4 millimetres, so one inch of rain on one square metre is 25.4 litres. Because the point is 0.254 millimetres [1], a rainfall of 100 points is 25.4 millimetres, or one inch. Use whichever unit your rain gauge or weather service reports, and set the units box to match, so that the calculator does the conversion for you.

Common mistakes

  • Using the sloping area of a roof. Use the footprint.
  • Forgetting the losses. Enter a collection efficiency.
  • Mixing inches and millimetres. Check the units setting.
  • Treating drainage as a volume problem only. The rate of rain matters too.

What next

Use this often? Add Rainfall Vol to your Home screen.

Frequently asked questions

What is a rainfall volume calculator?

A tool that turns a depth of rain over an area into a volume of water.

How many litres is 1 mm of rain?

One millimetre of rain on one square metre is one litre.

How many gallons is one inch of rain on 1,000 square feet?

About 623 US gallons.

Do I use the roof's sloping area?

No. Use the horizontal footprint that the rain falls on.

What is the collection efficiency?

The share of the rain that ends up in the tank after splash, gutter and first-flush losses.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools