Saved

Press the star next to a tool's name to save it.

All my tools

Rain to Snow Calculator

Use this rain to snow calculator to turn rainfall into snow depth, or snow into its liquid equivalent, using a snow to liquid ratio taken from the air temperature.

Restored your last values ·

Choose rain to snow or snow to rain. Enter the amount of liquid water or of snow and the air temperature, and the calculator picks a snow to liquid ratio from a temperature table. Or enter your own ratio.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose the direction, enter the amount and the air temperature, then press Calculate.

See full result

A rain to snow calculator turns an amount of liquid precipitation into an amount of snow, or snow back into its liquid equivalent, using a snow to liquid ratio that depends on the air temperature. Enter the amount and the temperature, or your own ratio, and you also see the result at the traditional 10 to 1 and at a ratio of 13 to 1.

How to use the rain to snow calculator

  1. Choose US or metric units, then rain to snow or snow to rain.
  2. Enter the amount.
  3. Pick the ratio from the air temperature, or choose my own ratio and type it in.
  4. Press Calculate.

The basic formula

The conversion is snow = rain × SC, where SC is the snow coefficient, the depth of snow produced by one unit of liquid; divide by SC to go the other way. Weather studies call this number the snow-to-liquid ratio [1]. Because the ratio has no unit, the same coefficient works for inches and for centimetres. The calculator follows that formula and lets you choose the units.

The temperature table

The tool uses a table of planning values by air temperature: 0.1 from 34 to 45 °F, 10 from 27 to 34 °F, 15 from 20 to 27 °F, 20 from 15 to 19 °F, 30 from 10 to 14 °F, 40 from 0 to 9 °F, 50 from −20 to −1 °F and 100 below −20 °F. The table is our own rough guide, not a published standard. In metric, the bands are 1 to 7 °C, −3 to 1 °C, −6 to −3 °C, −9 to −7 °C, −12 to −10 °C, −18 to −13 °C, −29 to −18 °C and below −29 °C. Colder air makes lighter, fluffier snow, so each unit of liquid makes more depth, while wet snow near freezing makes less [2].

Worked examples

The first example is 4 inches of rain at 3 °F. The temperature is in the 0 to 9 °F band, the coefficient is 40, and the snow is 4 × 40 = 160 inches. The second is 12 inches of snow at 16 °F: the coefficient is 20, so the liquid is 12 ÷ 20 = 0.6 inches. The calculator gives both results. They are extreme figures, since such cold, dry snow is rare, but they show the table at work.

How we handle the edges

The table has gaps, such as between 19 and 20 °F, and shared edges, such as 27 and 34 °F, so we use a rule of our own. The temperature is changed to degrees Fahrenheit if needed, rounded to the nearest whole degree, and when a value falls on a shared edge the colder band wins. So 34 °F uses the factor 10 and 27 °F uses 15. No published table settles such values, so we state our choice here so that you can check it.

The warm band

The first row of the table, from 34 to 45 °F, has a coefficient of 0.1, which is not a snow ratio. At that temperature, 10 inches of rain would give only 1 inch of snow, so the row is effectively rain. Above 45 °F, the table has no row, and the calculator tells you that the precipitation is rain. If the temperature is above freezing, we also warn that the precipitation may be rain or a mix, so a ratio from temperature alone is unreliable.

The 10 to 1 rule

In general, 1 inch of liquid gives about 10 inches of snow, wet snow gives less, and dry, fluffy snow gives more [2]. The ratio of 10 to 1 has a long history: a 2005 study says that it was given to weather observers from 1875, and that they were told in 1894 that it was only a rough approximation [1]. The calculator shows your result at 10 to 1 for comparison.

A better average

The same study of observations across the contiguous United States concluded that a mean ratio of 13 seems more appropriate for much of the country [1]. Its table of the whole data set gives a mean of 13.53, a median of 12.14, and a middle half of the values between 9.26 and 16.67 [1]. So the calculator also shows your result at 13 to 1, which is a convenient middle value of those figures, and the spread shows how wide the real range is.

Why precision is limited

The study gives an example of how much the ratio matters: a forecast of 0.25 inches of liquid gives 2 inches of snow at a ratio of 8, but 5.5 inches at a ratio of 22 [1]. It also says that the weather service's table based on the surface temperature is only marginally effective [1]. The temperature table is our own planning aid, so we call its values approximate. It also ignores wind chill and humidity.

Your own ratio

If you have a local ratio, for example from measuring a snowfall, choose the option for your own ratio. Then the temperature is not used. A ratio of 8 turns 3 inches of liquid into 24 inches of snow, and, in the other direction, 3 inches of snow into 0.375 inches of liquid. This is plain arithmetic of our own, and it is handy for checking a forecast that gives only one of the two numbers.

Using the results

The result is a planning figure, for example to guess how much snow a forecast of rain at a given temperature might bring. It is not a forecast: the ratio depends on the storm, the height above the ground and how long the snow has settled. For roof loads and other safety questions, rely on official forecasts and on the building rules, not on this estimate.

Common mistakes

  • Using the table for warm air. Above 45 °F there is no snow ratio.
  • Mixing inches and centimetres. Keep the same unit for the input and the answer.
  • Treating 10 to 1 as exact. Real ratios vary a lot from storm to storm.
  • Forgetting that melted snow is smaller. Liquid equivalent is the depth of water after melting.

What next

Use this often? Add Rain to Snow to your Home screen.

Frequently asked questions

What is a rain to snow calculator?

A tool that converts liquid precipitation into snow depth, or snow depth into liquid, using a snow to liquid ratio.

How do you convert rain to snow?

Multiply the liquid amount by the snow coefficient for the air temperature; divide by it to go from snow to liquid.

How much snow does 1 inch of rain make?

Often about 10 inches, but less for wet snow and more for dry, fluffy snow, depending on temperature and the storm.

Why does the calculator show 13 to 1?

A 2005 study of United States observations found a mean ratio of about 13, so we show it beside the old 10 to 1 rule.

Is the result a forecast?

No. The temperature table is approximate and real snow ratios vary from storm to storm.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters