Saved

Press the star next to a tool's name to save it.

All my tools

Quilt Calculator

Use this quilt backing calculator to work out how many pieces of fabric and how many yards you need for the back of a quilt, with the extra allowance on every side.

Restored your last values ·

Enter the size of the quilt top and the usable width of the backing fabric. The calculator adds 4 inches on each side, and gives the pieces to cut and the length of fabric to buy.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the quilt top size and the fabric width, then press Find the backing.

See full result

A quilt backing calculator works out how much fabric you need for the back of a quilt. Enter the width and length of the quilt top and the usable width of your fabric, and the calculator adds an allowance on every side, and gives the number of pieces and the fabric to buy. It follows the University of Kentucky Cooperative Extension guidance on cutting the backing larger than the top. [1] It runs in your browser and nothing you enter is sent anywhere.

How to use the quilt backing calculator

  1. Choose US or Metric units.
  2. Enter the width and the length of the quilt top, with the width as the shorter side.
  3. Enter the usable width of the fabric and choose whether it is directional.
  4. Press Find the backing.

Why the backing is bigger than the top

The backing must be larger than the quilt top, so that there is room for the quilting machine or the frame, and for the layers to shift a little as you quilt. The Kentucky Extension guide says to cut the backing 2 to 4 inches larger than the quilt top on all four sides. [1] The calculator uses 4 inches, the top of that range, which is 8 inches in each direction. A quilt top of 60 by 80 inches therefore needs a backing of 68 by 88 inches. You can change the allowance in the calculator if you prefer a different one.

Directional fabric

A directional fabric has a print or a nap that runs one way, so the pieces must all be cut in the same direction. In our own working, the width of the fabric runs across the quilt. If the padded width is no more than the width of the fabric, you need one piece. If it is more, you need two or more pieces, joined side by side, each as wide as the padded width divided by the number of pieces and as long as the padded length. The fabric to buy is the number of pieces times the padded length, divided by 36 to give yards.

Worked example

Our worked example is a quilt top of 60 by 80 inches with fabric 45 inches wide. The padded size is 68 by 88 inches. Sixty-eight is more than 45 and less than 90, so two pieces are needed, each 34 inches wide and 88 inches long. The total is 2 times 88, which is 176 inches, or 4.89 yards. The seam between the two pieces is not allowed for, so the real width of each piece is a little more than half, and many quilters buy a bit extra to be safe.

Non-directional fabric

If the fabric has no direction, you can also run the width of the fabric along the length of the quilt. The calculator also checks both ways of laying out the pieces and shows the one that takes less fabric. For the same quilt, running the 45-inch width along the 88 inches of length needs 2 pieces of 68 inches, which is 136 inches, or 3.78 yards, less than the directional layout. This is our own working.

Buying fabric

Fabric sold as 45 inches wide is often a little narrower once the selvedges are cut off, so enter the width that is really usable. Wide-back fabrics, which are made 90 to 108 inches wide for quilt backs, may need only one piece. Wash the fabric first if you will wash the quilt, since the backing may shrink.

Reading the result

The calculator shows the padded size of the backing, the number of pieces, the size of each piece, the total length to cut and the fabric to buy. The padded size is the quilt top plus the allowance on every side. The size of each piece tells you how to cut, and the fabric to buy is in yards for US units and in metres for metric units. If the result is a long way from a whole yard, you may prefer to round up to the next quarter yard.

Joining pieces

The Kentucky Extension guide says a large project may need one or two seams on the back. [1] When the backing needs two or more pieces, you sew them together along their long sides. Many quilters put the seam in the centre of the quilt, but it can also be off to one side to make a more interesting backing. Trim the selvedges before you sew, and press the seam open to reduce the bulk. Because the seam uses some of the width, make sure that the joined piece is at least as wide as the padded width.

Batting and the quilt top

This calculation covers the backing only, and it does not work out the size of the top from the blocks, the sashing or the borders. Use the size of the finished top that you have measured. The Extension guide centers the batting on the backing before the top is laid on it. [1] Batting is bought as a sheet or by the yard, so check the size of the batting you buy against the padded size shown here.

Wide backing fabric

If you use extra-wide fabric made for quilt backs, enter its usable width. A wide fabric can cover a large quilt in one piece, and the calculator will then show one piece and the length as the padded length. This avoids the seam and often saves time, although the fabric itself can cost more per yard.

Common mistakes

  • Using the full width of the bolt. Take off the selvedges.
  • Forgetting the allowance. The backing needs extra on every side.
  • Mixing up width and length. Enter the shorter side as the width.
  • Ignoring the seam. Joining pieces uses a little fabric.

What next

Use this often? Add Quilt to your Home screen.

Frequently asked questions

What is a quilt backing calculator?

A tool that works out how much fabric you need for the back of a quilt from the size of the top and the width of the fabric.

How much bigger should the backing be?

University of Kentucky Extension says 2 to 4 inches on all four sides. The calculator uses 4 inches, which is 8 inches in each direction.

How much backing for a 60 by 80 inch quilt with 45 inch fabric?

Two pieces of 34 by 88 inches, a total of 176 inches or about 4.89 yards.

What if the fabric is directional?

The width of the fabric must run across the quilt, so the pieces are joined side by side.

Does it cover batting?

No. This calculation covers the backing only. Check the batting packaging and center the batting on the backing.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Fun & Lifestyle Tools