Saved

Press the star next to a tool's name to save it.

All my tools

Quilt Binding Calculator

Use this quilt binding calculator to work out the length of binding, the number of strips and the fabric to buy for straight or bias binding from the quilt size.

Restored your last values ·

Enter the length and width of the quilt, the width you want each binding strip to be cut, and, for straight binding, the width of your fabric. The calculator gives the length of binding, the strips and the fabric to buy.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the quilt size, the strip width and the fabric width, then press Find the binding.

See full result

A quilt binding calculator works out how much fabric you need to bind the edge of a quilt. Enter the length and width of the quilt, the width of the strips and the width of the fabric, and the calculator gives the length of binding, the number of strips and the length of fabric to buy. It can also give the minimum area for bias binding. It follows the method in Utah State University Extension's guide to binding a quilt. [1] It runs in your browser and nothing you enter is sent anywhere.

How to use the quilt binding calculator

  1. Choose US or Metric units and the binding type.
  2. Enter the length and width of the finished quilt.
  3. Enter the width of each strip you will cut.
  4. For straight binding, enter the width of the fabric, then press Find the binding.

The length of binding

The first step is the perimeter of the quilt, which is twice the length plus twice the width. Utah State University Extension adds an extra 10 inches, or 25.4 centimetres, to deal with seams and corners. [1] The result is the length of binding you must make. For a quilt of 80 by 60 inches, the perimeter is 280 inches, and the binding is 290 inches.

Straight binding

For straight binding, the strips are cut across the width of the fabric and joined end to end. The Extension guide divides the length of binding by the usable width of the fabric, rounds up to whole strips, and multiplies the number of strips by the strip width to get the fabric to buy. [1] It uses 40 inches as the usable width; the calculator uses the width you enter, and rounds the number of strips up. With fabric 42 inches wide, 290 divided by 42 is 6.9, so you cut 7 strips, which at 2.5 inches wide takes 17.5 inches of fabric. In US units, the calculator also gives this in yards, using 36 inches to the yard.

Bias binding

Bias binding is cut at 45 degrees to the grain, so that it stretches and goes round curves. For bias binding, our own working multiplies the length of binding by the width of a strip to get an area of fabric, and takes the square root to find the side of a square of fabric with that area. This is a minimum, because the way you lay out and cut the strips changes the amount of fabric you need. Buy more than the minimum. The Extension guide says bias binding is not needed unless you have a curved edge. [1]

The width of the strips

The Extension guide cuts each strip 2 1/4 inches wide across the width of the fabric, and says you can use 2 1/2 inches for a thicker quilt sandwich. [1] The width of the visible binding depends on how you attach it, so make a sample on a spare piece first. Wider strips give a wider binding and need more fabric.

The extra 10 inches

The 10 inches in the formula is for the seams and the corners. [1] It also covers the finish. You overlap the ends of the strips when you close the binding, and each join of two strips takes a little length. Corners are mitred, so they use fabric too. If your quilt is very large or has rounded corners, you may want to add more.

Reading the result

The calculator shows the perimeter of the quilt and the length of binding you need, with the 10 inches added. For straight binding, it then shows the number of strips, the length of fabric to cut and the fabric to buy. For bias binding, it shows the area of fabric and the side of a square with that area. If you are not sure that you have enough, buy a little more, since the cost of an extra quarter yard is small compared with running out.

Joining the strips

Strips of binding are joined end to end into one long length. The Extension guide cuts each strip end at a 45 degree angle, lines the ends up at opposite angles, sews them with a quarter inch seam and presses the seam open. [1] A diagonal seam spreads the bulk better than a straight one. The joins use a little of the length of each strip, which is part of the reason a margin is added to the perimeter.

Choosing straight or bias

Straight binding is cut across the fabric and is the easiest to make, and it suits a quilt with straight edges. Bias binding stretches and curves around rounded corners and scallops, and wears more evenly because the threads cross the edge at an angle, but it takes more fabric. The calculator gives both so that you can compare the amount of fabric each needs for your quilt.

Planning ahead

Decide on the binding fabric before you finish the quilt, so that you can buy it with the backing. If you use the same fabric as the backing or the border, you may be able to cut the binding from the same piece, but check that you have enough. Cut the strips a little wider than you need, then trim after you have sewn the first seam, for a neat result.

Common mistakes

  • Using the fabric width of the quilt back. Use the width of the binding fabric.
  • Forgetting to round up. Only whole strips can be cut.
  • Taking the bias figure as exact. It is a minimum.
  • Cutting the strips too narrow. They must fold over the edge on both sides.

What next

Use this often? Add Quilt Bindin to your Home screen.

Frequently asked questions

What is a quilt binding calculator?

A tool that works out the length of binding, the strips and the fabric needed to bind a quilt.

How long should the binding be?

The perimeter of the quilt (2 × length + 2 × width) plus 10 inches (25.4 cm).

How many strips do I need?

The length of binding divided by the width of the fabric, rounded up.

How wide should binding strips be?

Utah State University Extension cuts 2 1/4 inch strips, or 2 1/2 inches for a thicker quilt sandwich.

Is the bias figure exact?

No. It is a minimum, since the cutting layout changes how much fabric you need.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Fun & Lifestyle Tools