A prime rib cooking time calculator tells you how long a rib roast needs in the oven so dinner is ready on time. Pick a bone-in or boneless roast, medium rare or medium, and enter the weight. The prime rib cooking time calculator returns a time range at 350°F, the temperature to pull the roast at and when to start checking it.
How to use the prime rib cooking time calculator
- Choose the roast: a bone-in rib roast or a boneless ribeye roast.
- Choose medium rare or medium.
- Enter the weight in pounds or kilograms. Bone-in roasts from 4 to 10 pounds and boneless roasts from 3 to 8 pounds are covered.
- Press Calculate. Read the time range and the removal temperature, then heat the oven to 350°F.
Where the times come from
The Beef Checkoff publishes an oven roasting table for beef cuts. For a ribeye roast at a preheated 350°F oven it lists total cooking times by weight band, and removal temperatures of 135°F for medium rare and 145°F for medium. [1] The calculator uses those times, taking the middle of each weight band and reading smoothly between bands, so a 6 pound roast gets a time between the 4 to 6 and 6 to 8 pound rows. That smoothing is our own working.
| Roast and weight | Medium rare | Medium |
|---|---|---|
| Bone-in, 4 to 6 lb | 1 3/4 to 2 1/4 h | 2 1/4 to 2 3/4 h |
| Bone-in, 6 to 8 lb | 2 1/4 to 2 1/2 h | 2 1/2 to 3 h |
| Bone-in, 8 to 10 lb | 2 1/2 to 3 h | 3 to 3 1/2 h |
| Boneless (small end), 3 to 4 lb | 1 1/2 to 1 3/4 h | 1 3/4 to 2 h |
| Boneless (small end), 4 to 6 lb | 1 3/4 to 2 h | 2 to 2 1/4 h |
| Boneless (small end), 6 to 8 lb | 2 to 2 1/4 h | 2 1/4 to 2 1/2 h |
The boneless figures are for the small end of a ribeye roast. The large end takes a little longer, so check it earlier rather than later. [1]
Removal temperature and resting
The Beef Checkoff table says to remove the roast from the oven at 135°F for medium rare and 145°F for medium. [1] South Dakota State University Extension suggests taking prime rib out at 130 to 135°F for medium rare or 140 to 145°F for medium, notes that the meat keeps cooking for 10 to 20 minutes after it leaves the oven, and says to rest it 10 to 15 minutes before carving. [2] We show the table figure, so if you like a slightly rarer center, take it out a few degrees lower.
The USDA safe minimum for beef roasts is 145°F with a 3 minute rest. [3] A medium rare roast served at about 135°F is below that figure, so if you need the safe minimum, for example when serving pregnant guests, older adults or young children, roast to 145°F.
A worked example
A 7 pound bone-in rib roast, medium rare. The 6 to 8 pound row gives 2 1/4 to 2 1/2 hours at 350°F, which is 2 h 15 min to 2 h 30 min. Divided by the weight that is about 19 to 21 minutes per pound. Start checking about 30 minutes before the low end, at 1 h 45 min, and take the roast out at 135°F. Rest it 10 to 15 minutes while the temperature rises a little.
Minutes per pound is not enough
A single minutes per pound number breaks down because a big roast and a small roast do not cook at the same pace. The table shows it: a 5 pound bone-in roast at medium rare takes about 24 minutes per pound, while a 9 pound roast takes about 18. That is why the calculator reads times by weight band instead of multiplying one rate by the weight.
Planning the dinner clock
Work backwards from the time you want to carve. Subtract the rest of 10 to 15 minutes, then the roasting time, then 15 to 20 minutes for the oven to preheat. For a 7 pound bone-in roast and a 7 pm carve, that means the roast goes in between about 3:55 and 4:20 pm, and you would start checking the temperature at about 6 pm. Because the table gives a range and ovens vary, it is safer to aim for the early end and hold a roast that finishes ahead of time under foil than to rush guests. A roast that is ready 20 minutes early loses very little.
Bone-in or boneless?
A bone-in rib roast is the traditional standing rib roast. The bones make it a little thicker and slower to cook, and many cooks like the flavor and the built-in rack. A boneless ribeye roast is easier to carve and takes slightly less time at the same weight. The calculator covers both, so choose the one you bought, and remember that the boneless table is for the small end of the roast.
Tips for a good roast
- Insert the thermometer into the center of the thickest part, away from the bone.
- Take the roast out of the refrigerator earlier if your recipe says to temper it, and allow for the roast being cold if you skip that. A cold roast adds time.
- Pat the roast dry and season it generously before roasting.
- Let the oven fully preheat to 350°F. An oven thermometer shows whether the dial is right.
- Tent loosely with foil while it rests so it stays warm without steaming the crust.
- Carve against the grain, and cut the bones away first on a bone-in roast.
Common mistakes
- Cooking by time alone. Use the thermometer.
- Forgetting carryover heat. The temperature rises while the roast rests, so pulling at the final temperature can overshoot.
- Using the boneless time for a bone-in roast. They differ.
- Cutting into the roast the moment it comes out, which sends the juices onto the board.
- Entering the weight of the roast after trimming when you cooked it untrimmed.
Use the prime rib cooking time calculator to plan the evening, and let a thermometer decide when to carve.
What next
Use this often? Add Prime Rib Co to your Home screen.
Frequently asked questions
How long does a prime rib cooking time calculator say for a 7 pound roast?
For a 7 pound bone-in roast at 350°F it gives 2 h 15 min to 2 h 30 min for medium rare and 2 h 30 min to 3 h for medium.
What temperature should prime rib be taken out of the oven?
The Beef Checkoff table says 135°F for medium rare and 145°F for medium. SDSU Extension suggests 130 to 135°F and 140 to 145°F.
How long should prime rib rest before carving?
SDSU Extension says 10 to 15 minutes. The roast keeps cooking for 10 to 20 minutes after it leaves the oven.
Is medium rare prime rib safe to eat?
The USDA safe minimum for beef roasts is 145°F with a 3 minute rest. Roast to 145°F if you want to follow that guidance, especially for vulnerable guests.
Does a bone-in roast take longer than a boneless one?
In the table a bone-in roast of the same weight band takes a little longer, because it is thicker. Use the setting that matches your roast.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.